Abstract:In this present work, ZrC particles incorporated Ni-Co composite coatings were electrodeposited. The objective of this article is to study the influence of Co content on the microstructure and properties of Ni-Co-ZrC coatings. Pure Ni and Ni-ZrC coatings have also been electrodeposited for comparison. Surface morphology, chemical composition, microstructure, and microhardness of Ni-Co-ZrC coatings were characterized by scanning electron microscopy, energy dispersive spectrometer, x-ray diffractometer, and Vicker microhardness tester. The potentiodynamic polarization technique was applied to measure the corrosion behavior of the coatings. By increasing Co concentration in electrolyte, Co content of the coatings was modified from 0 to 80 wt.% and ZrC particles content of the coatings was reduced. As the Co content increased, the dominant phase structure was changed from face centered cubic to hexagonal close packed crystal structure. Surface morphology of the Ni-Co-ZrC coatings was changed from nodular to sharp corner structure, and finally branched morphology with increasing Co content of the coating. Among the electrodeposited coatings, Ni-Co-ZrC coating with 42 wt.% Co content exhibited the highest microhardness. The corrosion potential of the coating was shifted to more positive with increasing the Co content from 0 to 64 wt.%. The lowest corrosion rate of 4.507 × 10 −7 g·h −1 ·cm −2 was found for Ni-Co-ZrC coating at the Co content of 75 wt.%.

Microstructure Characteristics of the Nickel Matrix in Electrodeposited Ni-Psz Gradient Coating

Electroforming of nickel and partially stabilized zirconia (Ni + PSZ) gradient coating

Studies on the Cathodic Current Efficiency in the Electrodeposition Ni PSZ Gradient Coating

The microstructure and wear resistance characteristics of electroformed nickel and partially stabilized zirconia composite coatings

Electrodeposition of Ni Matrix Composite Coatings Containing Zrc Particles

On the adhesion performance of gradient-structured Ni–P metallic coatings

Effect of Electrodeposition Parameters on the Evolution of Crystallographic Texture and Internal Stress of Ni/ZrC Composite Coatings

A Novel Strategy for Designing Fe-Ni Gradient Multilayer Coatings Using Laser-Assisted Electrodeposition and Regulation Mechanism

Mechanical Behavior of Structurally Gradient Nickel Alloy

Mechanical Properties and Optimal Grain Size Distribution Profile of Gradient Grained Nickel

Microstructural Evolution, Mechanical Properties and Thermal Stability of Gradient Structured Pure Nickel

Grain Orientation Induced Softening in Electrodeposited Gradient Nanostructured Nickel during Cold Rolling Deformation

Effect of Grain Gradient on Mechanical Properties of Nanopolycrystalline Ni–Co Alloys

Study on microstructure and corrosion resistance of Ti-doped nickel-based alloy coatings

Tailoring role of Al and Ti particles in the microstructure and property of electrodeposited Ni matrix nanocomposite coatings

Microstructure and Secondary Phase Particles of Hot Dipped Zn-0.15 % Ni Coating on Low Carbon Steels

Microstructure of NiCoCrAlY component in plasma sprayed ZrO2/NiCoCrAlY graded coating

Microstructure Characteristic Of Plasma Sprayed Zro2/Nicocraly Graded Coating

Isothermal Oxidation Behaviour of a Gradient NiCoCrAlSiY Coating Deposited by Arc Ion Plating on a Ni-based Single Crystal Superalloy

Microstructure and Corrosion Behavior of Electrodeposited Ni-Co-ZrC Coatings

Study on gradient structure and interface mechanical properties of n–8YSZ/AlCoCrFeNi high–entropy coatings