GRAY MODEL BASED FAULT FORECASTING TECHNIQUE AND ITS APPLICATION IN PROPULSION SYSTEM OF SPACE

Huitao Cheng,Wenhu Huang,Xingwei Jiang

DOI: https://doi.org/10.3321/j.issn:1001-4055.1998.03.018

1998-01-01

Abstract:The gray theory and forecasting technique were connected with expert system, and a fault forecasting system was built. The space propulsion system was taken as an example, and the validity of the method has been shown.

What problem does this paper attempt to address?

Application Of Grey Theory To Fault Prediction Of Chemical Equipment System

Li-Li Dong,Dao Huang,Xin Wei

2006-01-01

Abstract:The application of the grey theory to fault prediction on the Continuous Stirred-Tank Reactor (CSTR) in chemical equipment system are introduced and two examples with detailed procedure on modeling, calculating and analyzing the GM (1, 1) are given. Results showed that the grey prediction model can reflect the time-varying characteristics of the equipment system dynamically. The grey model needs smaller sample size and the calculation is simple and convenient. The prediction result is reliable and highly accurate. When it is adopted in the real-time monitoring of the equipment system, it can foretell the trend of the performance, and running state of equipment system and the extent of damage caused by the possible fault. This will make it possible to take preventive measures in advance. It cannot only avoid catastrophic accident, but also assures that the equipment system has a safe and long run. It is also helpful for decision-making to stop the running or not when fault symptom appears.
GS-ANN Based Integrated Model for Weekly and Monthly Load Forecasting

王启明,方静,王子琦,周鹏,李同,鞠平

DOI: https://doi.org/10.3969/j.issn.1004-9649.2009.09.009

2009-01-01

Abstract:The gray theory and the artificial neural network as two well-established tools for load forecasting have their respective advantages and disadvantages and the applicable scope. The union ways of the two load forecasting tools in predecessor's foundation were summarized and the union ways were classified into five kinds of definition: synthetic parallel connection model, synthetic series connection model, neural network system with auxiliary grey system model, grey system with auxiliary neural network system model and compensated model. Based on the actual need, the synthetic series connection model was chosen for modeling of weekly monthly load. The actual examples prove that the synthetic series connection has better accuracy in weekly monthly load forecasting than the gray forecast model or the artificial neural network forecast model.
DESIGN OF GREY MODEL BASED PREDICTIVE CONTROLLERS AND ITS APPLICATION

J Wang,W An,J Zhongliang

DOI: https://doi.org/10.3321/j.issn:0258-8013.2002.09.003

2002-01-01

Abstract:A predictive fuzzy controller based on grey model is proposed. By employing grey modeling approach, a two-phase fuzzy controller is constructed which input variants are prediction error and prediction error rate of P-th-step ahead. Fuzzy decision making mechanism according to present state of the plant is introduced into the arithmetic to enhance the controller's performance. Application on decomposing furnace temperature system of cement rotary kiln both prove the efficiency of the proposed methods.
Application of Innovation Grey Theory to Fault Predication of Uncertainty Systems

DONG Li-li,WEI Xin,HUANG Dao,GU Xing-sheng,LIANG Lin-quan

DOI: https://doi.org/10.14135/j.cnki.1006-3080.2006.12.025

2006-01-01

Abstract:Structural complexity,uniqueness of operating environments and multi-source of the failure greatly increase the uncertainties of modern equipment system.These uncertainties further result in the less data,which reflect main dynamic characteristic of system.Innovation Grey Prediction Model(IGPM) can get better model by updating data in time.For poor information of uncertainty equipment systems,IGPM is applied to prediction of equipment operation.The modeling procedure of emulation based on FIGPM is presented,and the prediction result is compared with BP neural networks.It is proved that IGPM has good practicability and validity.
On-line Forecasting-Validating Model of Real-time Date for Turbogenerator Operating Expert System

陈坚红,盛德仁,李蔚,任浩仁

DOI: https://doi.org/10.3969/j.issn.1005-006x.2001.06.019

2001-01-01

Abstract:The integrity and accuracy of the real-time data acquired by DCS are the foundation of turbogenerator optimizing operating expert system. With the focus of a bottleneck problem amount of calculation and storage, this paper makes an on line real time data forecasting validating model, that can forecast and validate next data magnificently. The experimental result and practical application indicate that the model is applicable to on line real time data forecasting validating for turbogenerator operating expert system.
Fault Prediction for Satellite Attitude Control System Based on Fuzzy-Parity Equation and Grey Model

Zhang Chunhua,Song Hua,Xiong Kai

DOI: https://doi.org/10.1109/imccc.2015.399

2015-09-01

Abstract:Since present fault prediction method of satellite attitude control system cannot describe and predict the nonlinear system effectively, a new method based on fuzzy-parity equation and grey GM(1,1) model is presented in this paper. Firstly, fuzzy-parity equation and Kalman filter are utilized to extract the fault feature of satellite actuator. Translation transformation and buffer operator are adopted to process the fault feature so as to establish an equal dimension and new information GM(1, 1) model. Then the development trend of the fault feature is predicted and the confidence level of one-step prediction result is evaluated through the prediction grey-level. Simulations demonstrate that the proposed method can predict fault trend effectively and accurately.
Fault Prediction Using a Grey-Markov Model from the Dissolved Gases Contents in Transformer Oils

Liu Yang,Du Yu,Wang Zhiwu,Feng Guangming,Rao Shaowei,Zou Guoping,Yang Shiyou

DOI: https://doi.org/10.1051/e3sconf/202125601038

2021-01-01

E3S Web of Conferences

Abstract:A novel method to predict transformer fault by forecasting the variation trend of the dissolved gases content is proposed. After the content of each feature gas, such as hydrogen and methane, is obtained by the proposed forecasting model, the fault type can be diagnosed by the dissolved gas analysis (DGA) technologies. Firstly, the GM (1,1) grey model with unequal time interval is introduced to generate a general forecasting model for each feature gas. The introduced grey model with unequal time interval will enforce no constrain on the historical measurement data. Consequently, the time intervals of the two adjacent measuring points can be either constant or variant. To address the deficiency that the existing grey model is unable to describe the fluctuation of the predicted object in time domain, the Markov chain is introduced to improve the accuracy of the grey forecasting model. An adaptive method to automatically divide the state space based on the number of states and the relative error of the grey model is presented by using Fibonacci sequences. Practical measurements are used to verify the accuracy of the proposed forecasting model. The numerical results show that there is high probability (86%) that the proposed grey-Markov model acquires a smaller prediction residual as compared to the original GM(1,1) grey model.
Study on the Prediction Methods of Aero Engine Fault Parameters

Li Dewang,Jiang Dongxiang

DOI: https://doi.org/10.2991/ipemec-15.2015.83

2015-01-01

Abstract:This paper uses the least squares method, BP neural network and gray GM(1,1) model for trend forecasts and predicting the remaining life of the aero-engine fault parameters. By comparing the results of the three methods, the least squares method and BP neural network method predicting results are more exact than the gray GM(1,1) model. The three methods are also used for predicting the actual data, and the result is close to the real.
GREY THEORY BASED VIBRATION PREDICTION FOR STEAM TURBINES

LIANG Lei,SU Leitao,FENG Yongxin,JIANG Dongxiang

DOI: https://doi.org/10.3969/j.issn.1002-3364.2012.10.018

2012-01-01

Abstract:The Mechanism of grey prediction method and its application advantages in safety prediction were described.This method was used to predict the vibration amplitude within the coming 6hours for a steam turbine.Moreover , the prediction results were examined using correlation degree and posterior error.Results indicated that , this grey prediction method had small posterior error and got a grade I accuracy.We can foreknow the variation trend of vibration amplitude of the steam turbine through this method , so as to take timely countermeasures.Therefore , the operation safety of the power unit was improved.
Analysis and prediction for dynamic requirements in house of quality based on grey theory

谭建荣,方辉,冯毅雄,李中凯

DOI: https://doi.org/10.13196/j.cims.2009.11.194.lizhk.029

2009-01-01

Abstract:Aiming at the deficiencies of requirements' importance analysis in Quality Function Deployment (QFD), a dynamic requirements' analysis method in house of quality was put forward by integrating multi-attribute decision and trend prediction. By analyzing the requirements' dynamic characteristics such as fuzzy, individualized and changing phase, an integrated model for the analysis and prediction of dynamic requirements based on grey system theory was constructed in which data acquisition, multi-attribute decision and trend prediction were regarded as the basic modules. Basic data gathering was completed by taking customer and market competitive factors as the data sources. Then, the importance of customer and technical requirements were analyzed by the grey corelation analysis and their recent trend knowledge were obtained with the GM(1, 1) model to achieve the acquisition, analysis and prediction of requirement information in QFD. Finally, feasibility and effectiveness of the proposed method were proved by the requirements analysis of large scale air separation system.
Fault prediction approach for dynamic system

艾红,周东华

DOI: https://doi.org/10.3321/j.issn:1671-4512.2009.z1.056

2009-01-01

Abstract:Fault prediction means predicting whether faults occuror not based on historical and present data. This paper first illustrates abrupt fault and slow change fault. The performance parameter of false alarm rates and missed alarm rates are expatiated. The key problem in fault prediction is pointed out. The main methods of fault prediction for dynamic systems are outlined, including neural network, expert system and fuzzy neural network methods. Gray system, particle filter and time series methods are analyzed. Fault prediction disadvantage of gray system and particle filter are illustrated. Excellence and disadvantage of neural network are expounded. The characteristics and typical applications of main fault prediction methods are introduced. Finally, the actual research actuality and existent problem of fault prediction are brought forward. The research trend of fault prediction is pointed out.
Remaining Useful Life Prediction for Aircraft Engines Based on Grey Model

Kaixiang Peng,Yanting Pi,Ruihua Jiao,Jie Dong,Kai Zhang,Chuanfang Zhang

DOI: https://doi.org/10.1109/phm-qingdao46334.2019.8943000

2019-01-01

Abstract:Assessing the health status and predicting the remaining useful life (RUL) of system can be carried out effectively by prognostics and health management (PHM). It is a significant guarantee to enhance the security and economy of complex systems such as aircraft engines. A new approach for aircraft engines RUL prediction is proposed to fully assess the health status of the engines. Firstly, the health indicator model is constructed by liner regression. Secondly, the improved grey model GM(1,1) is constructed based on the health indicator (HI). Finally, the system RUL is obtained by the improved GM(1,1) model. A case study is performed on C-MAPSS aircraft engine datasets examining the validity of approach proposed by us. According to the experimental results, a better prediction accuracy is given by the proposed method compared to traditional method.
Multi-Parameter Prediction Model of Flighter Control Surface Fault

XU Yan-ling,ZHANG Xin-guo,ZHU Rong-fang

2008-01-01

Abstract:Predicting the flighter control surface effectiveness loss and lock-in-place during air combat accurately has great significance to ensuring aircraft safety.At present,in the main flighter outburst configuration fault prediction methods,only one characteristic parameter is considered or several characteristic parameters are considered in isolation,there is a lack of consideration of the characteristic parameters together.Because flighter control surface fault often characterize as a variety of feature signal,and the same characteristic signal may also reflects the different faults,the multi-parameter prediction model is proposed based on the idea of grey forecast model and information fusion.Using this model,the relevant parameters of time-series can be not only to provide for their own forecast information but also to provide the necessary information for the others,so the accuracy of the forecast is increased.Finally,a good forecast effect is given through an flighter control surface fault prediction example,the obtained results show that the model is availability.
Safe Management System Based on Fault Diagnosis

HAO Wen-bo,FENG Ping-fa,YU Ding-wen

DOI: https://doi.org/10.3969/j.issn.1001-3997.2005.10.080

2005-01-01

Abstract:The methods of condition inspect,alarm,fault diagnosis and failure forecast based on data acquisition using computer are presented based on a actual project.The gray method and grey model are used to make diagnosis and forecast the condition of the rotating machine.Based on the theories introduced above,the manufacturing process safe managing system is developed and the problem of safe management in large corporation is solved.
Useful life prediction using a stochastic hybrid automata model for an ACS multi-gyro subsystem

Cheng Yuehua,Jiang Liang,Jiang Bin,Lu Ningyun

DOI: https://doi.org/10.21629/jsee.2019.01.15

IF: 1.363

2019-01-01

Journal of Systems Engineering and Electronics

Abstract:A useful life prediction method based on the integration of the stochastic hybrid automata (SHA) model and the frame of the dynamic fault tree (DFT) is proposed. The SHA model can incorporate the orbit environment, work modes, system configuration, dynamic probabilities and degeneration of components, as well as spacecraft dynamics and kinematics. By introducing the frame of DFT, the system is classified into several layers, and the problem of state combination explosion is artfully overcome. An improved dynamic reliability model (DRM) based on the Nelson hypothesis is investigated to improve the defect of cumulative failure probability (CFP), which is used to address the failure probability of components in the SHA model. The simulation using the Monte-Carlo method is finally conducted on two satellites, which are deployed with the same multi-gyro subsystem but run on different orbits. The results show that the predicted useful life of the attitude control system (ACS) with consideration of abrupt failure, degradation, and running environment is quite different between the two satellites.

automation & control systems,engineering, electrical & electronic,operations research & management science
Grey forecast model of foundation pit deformation based on intelligently correcting background value

Li Hengkai,Wang Xiuli,Liu Xiaosheng,Liu Jun

2012-01-01

Abstract:According to the data characteristics of the foundation pit deformation,the idea of using the grey forecast model of intelligently correcting background value to improve foundation pit' s deformation forecast is proposed.The exiting problems in constructing background value for traditional gray model was analyzed in this paper,and based on the analysis,the thinking for building model was elucidated in details,and finally,the model was fulfilled with the C# programming language and practiced in engineering practice.The application practice for predicting the deformation of foundation pit shows that the model can weaken the inherent errors of traditional gray model and improve model prediction accuracy,has a rather high accuracy and reliability,can be applied to engineering practice with good performance.
Autonomous Attitude Reconstruction Analysis for Propulsion System with Typical Thrust Drop Fault

Shuming Yang,Changlin Xie,Yuqiang Cheng,Dianyi Song,Mengyu Cui

DOI: https://doi.org/10.3390/aerospace9080409

IF: 2.66

2022-07-30

Aerospace

Abstract:The propulsion system is one of the important and vulnerable sub-systems in a strap-on launch vehicle. Among different failure modes, the thrust drop fault is the most common and remediable one. It degrades vehicle attitude tracking ability directly. To this end, this paper focuses on the design and application of attitude reconstruction problems with a thrust loss fault during the ascending flight phase. We firstly analyze the special failure modes and impacts on the propulsion system through a Failure Modes and Effects Analysis (FMEA). Then, six degrees of freedom dynamic and kinematic models are formulated, which are integrated into the Matlab/Simulink environment afterward. The above models' validation is realized through numerical simulations with different fault severity. Simulation results show that the max attitude deviation is only 0.67° approximately in the pitch angle channel under normal conditions, and the flight attitude angle deviation is directly proportional to the thrust loss percentage when the thrust drop fault occurs. Based on the validated models, a practical reconfigurable ideal through adjusting the control allocation matrix is analyzed. Then, an automation redistribution mechanism based on the moment equivalent principle before and after the thrust drop is proposed to realize proportional allocation of virtual control command among the actuators. The effectiveness of the designed attitude reconstruction method is demonstrated through numerical simulations and comparison analysis under various fault scenarios. The results show that the rocket attitude can be quickly adjusted to the predetermined program angle within about 2.5 s after the shutdown failure of a single engine, and the flight speed and altitude can also reach the required value with another 17 s engine operation. Therefore, the designed control reconfiguration strategy can deal with the thrust loss fault with high practicability and can be applied to real-time FTC systems. Last but not least, conclusions and prospects are presented to inspire researchers with further exploration in this field.

engineering, aerospace
Spacecraft Fault Diagnosis Based on Telemetry Data Mining and Fault Tree Analysis and Design of Expert System

Xiang Gao,Tao Zhang,Hong Jin Liu,Jian Gong

DOI: https://doi.org/10.4028/www.scientific.net/amr.760-762.1062

2013-01-01

Advanced Materials Research

Abstract:In this paper, a fault diagnosis method for spacecraft based on telemetry data mining and fault tree analysis was proposed. Decision trees are constructed from the history telemetry data of the spacecraft, and are used to classify the current data which is unknown whether it is fault. If there is a fault, the fault tree method will be used to analyze the fault reason and the impact on the spacecraft system. This method can effectively solve the problem of diagnostic knowledge acquisition. We design and construct a fault diagnosis expert system for spacecraft based on this diagnosis method. An experiment is presented to prove the effectiveness and practicality of the expert system.
Water Flooding Fault Management of PEMFC Based on Grey Prediction and Digital Twin

Lijun Wang,Xiangyang Li,Xu Da,Pengyan Guo,Chaoju Qin,Zhenzhong Yang

2021-01-01

CONVERTER

Abstract:In view of the difficulty in predicting the water flooding fault of proton exchange membrane fuel cell (PEMFC), the flooding fault management of PEMFC was carried out based on grey system theory and five-dimensional digital twin framework. Firstly, the collected PEMFC anode gas pressure drop data are processed, and the extracted sample data are used to construct the original grey prediction sequence. The analysis shows that the greyprediction model can maintain a high accuracy both under normal condition and when there is flooding. In order to realize the fault management of PEMFC, the water flooding fault identification and self-healing strategy of PEMFC were determined based on the five-dimensional digital twin model, so as to realize the predictive maintenance of PEMFC for water flooding fault.
Failure prediction of mechanical system based on meta‐action

Yan Ran,Jingjie Chen,Nafis Jawyad Sagor,Genbao Zhang

DOI: https://doi.org/10.1002/qre.3537

2024-03-20

Quality and Reliability Engineering International

Abstract:Highly reliable mechanical systems can lead to significant losses in the event of failure, and the lack of comprehensive failure data presents challenges for developing techniques such as critical part identification and failure prediction. In light of this, this paper proposes a meta‐action‐based fault prediction method that effectively addresses the issue of limited fault data. Initially, the mechanical system is decomposed utilizing the "Function‐Motion‐Action" (FMA) methodology to derive individual meta‐action units (MAUs). Subsequently, the limited sample of fault data from the mechanical system is combined with processed expert knowledge to construct the corresponding fault propagation‐directed graph. Furthermore, the key MAUs are determined by applying the Decision–Making Trial and Evaluation Laboratory (DEMATEL) method. Last, the degradation data of the key MAUs is acquired by monitoring them, and a non‐homogeneous discrete grey model (DNGM) integrated with an improved BP neural network is proposed to facilitate the fault prediction of MAUs. Using an industrial robot as a case study, the prediction results demonstrate the superiority of the method proposed in this paper over a single gray model and neural network, thereby providing a reliable prediction approach for anticipating the future trends of data‐deficient mechanical systems.

engineering, industrial, multidisciplinary,operations research & management science

GRAY MODEL BASED FAULT FORECASTING TECHNIQUE AND ITS APPLICATION IN PROPULSION SYSTEM OF SPACE

Application Of Grey Theory To Fault Prediction Of Chemical Equipment System

GS-ANN Based Integrated Model for Weekly and Monthly Load Forecasting

DESIGN OF GREY MODEL BASED PREDICTIVE CONTROLLERS AND ITS APPLICATION

Application of Innovation Grey Theory to Fault Predication of Uncertainty Systems

On-line Forecasting-Validating Model of Real-time Date for Turbogenerator Operating Expert System

Fault Prediction for Satellite Attitude Control System Based on Fuzzy-Parity Equation and Grey Model

Fault Prediction Using a Grey-Markov Model from the Dissolved Gases Contents in Transformer Oils

Study on the Prediction Methods of Aero Engine Fault Parameters

GREY THEORY BASED VIBRATION PREDICTION FOR STEAM TURBINES

Analysis and prediction for dynamic requirements in house of quality based on grey theory

Fault prediction approach for dynamic system

Remaining Useful Life Prediction for Aircraft Engines Based on Grey Model

Multi-Parameter Prediction Model of Flighter Control Surface Fault

Safe Management System Based on Fault Diagnosis

Useful life prediction using a stochastic hybrid automata model for an ACS multi-gyro subsystem

Grey forecast model of foundation pit deformation based on intelligently correcting background value

Autonomous Attitude Reconstruction Analysis for Propulsion System with Typical Thrust Drop Fault

Spacecraft Fault Diagnosis Based on Telemetry Data Mining and Fault Tree Analysis and Design of Expert System

Water Flooding Fault Management of PEMFC Based on Grey Prediction and Digital Twin

Failure prediction of mechanical system based on meta‐action