Synergistic adsorption and lubrication mechanism of CeO 2 nanoparticle and MoDTC in lithium complex grease
Jiajia Jia,Xue Lei,Kun Han,Peng Yue,Shuguang Fan,Chunli Zhang,Ningning Song,Guangbin Yang,Yujuan Zhang,Shengmao Zhang
DOI: https://doi.org/10.1016/j.triboint.2024.109819
IF: 5.62
2024-06-05
Tribology International
Abstract:Nano additive CeO 2 without sulfur and phosphorus was used in combination with molybdenum dithiocarbamate (MoDTC) to solve the problems of low load-bearing capacity and unsatisfactory friction-reducing property of organic molybdenum in lubricating grease. By using quartz crystal microbalance (QCM) to analyze the adsorption behavior of the composite additive, it was found that the viscoelastic co-adsorption behavior of MoDTC and CeO 2 nanoparticles significantly improved the adsorption rate and equilibrium adsorption mass, which made the P B value of the composite additive increased by 77.6 % and 12.6 % compared with CeO 2 and MoDTC, respectively. In the tribofilm formed by composite additive, CeO 2 nanoparticles that do not undergo frictional chemical reactions with MoDTC form a flat and hard intermediate layer in the tribofilm, which improves the bearing capacity and effectively suppresses the fluctuation and accumulation of layered MoS 2 on the surface. The layered structure is concentrated on the surface of the tribofilm and parallel to the friction direction, significantly reducing the sliding resistance between layers. Therefore, a thinner MoS 2 layer with appropriate orientation is more conducive to improving the friction reduction performance of the grease. This results in a 33.9 % decrease in the friction coefficient of organic molybdenum, while its load-bearing capacity increases from 900 N to 1400 N, enabling lithium complex grease to achieve low friction, low wear, and high load simultaneously.
engineering, mechanical