Abstract:Electroless nickel composite coatings have the potential for high-temperature tribological applications, and a combination of high wear resistance and low friction factor is one of the desirable solutions but still a tricky problem. The addition of self-lubricating WS2 and hard Si3N4 nanoparticles to the Ni-P coatings is expected to obtain good high-temperature tribological performance. In this work, Ni-P-Si3N4-WS2 composite coatings with various contents of WS2 nanoparticles were prepared using electroless plating and subsequently annealed at 400 °C in an inert atmosphere. The tribological properties of the coatings were evaluated using a ball-on-disc wear instrument at operating temperatures from 25 to 600 °C. The microstructure, chemical composition, and surface morphology of the coatings were characterized by X-ray diffractometry (XRD), energy disperse spectroscopy (EDS), and scanning electron microscopy (SEM). Upon increasing the WS2 dosage in the bath, the WS2 content in the coating increased and the micro-hardness of the as-plated coating increased from 539 to 717 HV. After heat treatment, the coating underwent a crystallization process, and the hardness increased from 878 to 1094 HV. The main wear mechanism of the coating changed from adhesive wear in the as-plated state to abrasive wear in the annealed state. The annealed Ni-P-Si3N4-WS2 coating with a WS2 dosage of 2.5 g/L in the bath exhibited excellent mechanical properties, with a hardness of 10.9 GPa, a friction coefficient of ~0.51, and a wear rate of 8.4 × 10−15 m3N−1×m−1 at room temperature, and maintained optimal performance at high temperatures. At operating temperatures of 200, 400, and 600 °C, the form of wear was adhesive wear for coatings with a WS2 dosage < 1.5 g/L and abrasive wear for coatings with a WS2 dosage ≥ 1.5 g/L. The synergism of WS2 and Si3N4 particles refined the grains of the Ni-P matrix in as-plated coatings and obviously reduced the friction coefficient of friction pairs in annealed coatings at all operating temperatures.

Study on friction and wear behaviors of electrodeposited Ni-PSZ composite coating

The microstructure and wear resistance characteristics of electroformed nickel and partially stabilized zirconia composite coatings

Fabrication and performance of Ni-Co-P/Si3N4 electroplated composite coatings on al-si alloys

Friction and Wear of Electroless Ni-P-CS Composite Coating

A Research on the Friction and Wear Properties of Electroless Ni-P Composite Coating

The friction and wear of electroless Ni–P matrix with PTFE and/or SiC particles composite

Preparation and properties of Ni/P/single-walled carbon nanotubes composite coatings by means of electroless plating

Friction and wear behavior of Ni–graphite composites prepared by electroforming

Antifriction and Wear Characteristics of Electrolessly-Deposited Ni–P with PTFE Composites

High Temperature Tribological Behavior of Electroless Plating Ni-P-Si3N4-WS2 Composite Coatings

Effect of Wear Conditions on Tribological Properties of Electrolessly-Deposited Ni-P-Gr-SiC Hybrid Composite Coating

Friction and wear behavior of Ni-P-carbon nanotubes (CNTs) electroless composite coating

Characterization and Wear Behaviors of Electrodeposited Ni-MoS2/SiC Composite Coating

Preparation and tribological properties of Ni-P electroless composite coating containing inorganic fullerene-like WS2 nanomaterials

Preparation and characterization of Ni-P-Al2O3-PTFE nanocomposite coatings by unidirectional jet electrodeposition

Effect of Particle Concentration on the Microstructure and Properties of Electrodeposited Nickel–Diamond Composite Coatings

Electrochemical Properties and XPS Analysis of Ni-B/SiC Nanocomposite Coatings

Preparation of laminar α-ZrP nanosheets enhanced Ni W nanocomposite coating and investigation of its mechanical and anti-corrosion properties

The tribological behaviour of electroless Ni–P–Gr–SiC composite

Strengthening effect of α-ZrP nanosheet inclusions on corrosion resistance and wear resistance of Ni P deposits

Fabrication and Characterization of Ni–Zr Composite Coatings Using Electrodepositing Technique