Abstract:The correct electric power fluctuation process of a wind farm is essential for the operation and studying of the power grid integrated with wind power. A complete wind energy conversion model, that should take both the spatial effects and the overall effect of all the pitch angle controllers into account, is required to convert the wind fluctuation into the electric power fluctuation. Although some equivalent models have been proposed in previous studies, there is no simple solution for equivalently modeling the non-synchronous actions of the pitch angle controllers in individual wind turbine generators. This study found the relationship between the overall effect of all the pitch angle controllers and the spatial effects of the wind farm and presented a theoretical derivation of the frequency-domain equivalent modeling method. The proposed modeling method is the simplest way to obtain the equivalent model of the complete wind energy conversion process of a wind farm with consideration of all the spatial effects and the overall effects of all the pitch angle controllers. The only input signal of the proposed equivalent model is the speed of the wind before entering the wind farm, which is called the "original incoming wind speed" and the only output signal is the total power of the wind farm. In this proposed equivalent modeling method, a discrete transfer function for representing both the wind energy conversion process, and all the spatial effects of a wind farm, can be obtained, first through a wind process below the rated wind speed. Second, a compensation factor for calculating a "compensation wind speed" of the original incoming wind can be obtained through a wind process that partly exceeds the rated wind speed. Using this compensation wind speed, a compensation power with negative values can be obtained to represent the total reduced power caused by the pitch angle controllers in individual wind turbine generators. A frequency-domain equivalent model has been identified and validated by field measurements of an actual wind farm. The normalized root-mean-squared error of the model is less than 8% over the entire wind process, and the maximum error of the power ramp rate in 10 min is less than 5 MW. Finally, an example is provided to demonstrate the online use of the proposed model to convert the forecasted wind speed into output power of a wind farm in ultrashort-term wind power forecast.

Modeling and simulation of large pitch regulated wind turbine system

Modeling and simulation of a large stall-regulated wind turbine system

Equivalent Modeling of Wind Energy Conversion Considering Overall Effect of Pitch Angle Controllers in Wind Farm

Design, Modeling and Implementation of a Novel Pitch Angle Control System for Wind Turbine

Adaptive Continuous Neural Pitch Angle Control for Variable‐Speed Wind Turbines

Modeling and Loading Compensation of A Rotary Valve-Controlled Pitch System for Wind Turbines

Modeling and simulation of yaw system of up-wind turbine unit

System identification of individual pitch control wind turbine

Semi-physical Simulation Test-bed for Electro-hydraulic Proportional Pitch-controlled Wind Turbine System Based on Bladed

Design and Simulation of Fuzzy Sliding-mode Robust Controller for Large Wind Generating Unit

Research on Variable Pitch Control System for Large-Scale Wind Turbine

Adaptive Back-Stepping Pitch Angle Control For Wind Turbine Based On A New Electro-Hydraulic Pitch System

A Large-scale Wind Power Generation Simulation and Testing System Ⅱ.Modeling and Simulation

L1 Adaptive Pitch Angle Controller of Wind Energy Conversion Systems.

The Hydraulic Pitch-Controlled Technology Of Wind Turbine

Design of Dynamic Simulation of Wind Turbine

Robust controller design of large pitch-regulated wind turbine while yawing

Analysis and calculation of variable pitch load for horizontal axis wind turbine

RESEARCH ON THE LOAD CONTROL OF WIND TURBINES BASED ON INDIVIDUAL PITCH TECHNOLOGY

Variable Pitch Control of Wind Turbine Based on Fuzzy Feedforward and Feedback Linearization Sliding Mode

Pitch Angle Control for Wind Turbine Based on Constant Pressure Network and Hydraulic Motor with Variable Displacement