Abstract:The work aims to improve microwave absorption properties of silicon carbide microparticles. Through improved chemical plating method, ferrocobalt alloy was deposited on the surface of SiC microparticles with CoSO4 and FeSO4 as the main reactants and NaH2PO2 as reducing agent by combining mechanical agitation and ultrasonic dispersion at the plating temperature of 50 °C. The crystal state, composition and morphology of the materials before and after plating were characterized by X-ray diffractometer (XRD), X-ray energy spectrometer (EDS) and scanning electron microscope (SEM). The electromagnetic properties of the materials were tested by vector network analyzer in the frequency range 2~18 GHz, and the microwave reflection loss was calculated. Ferrocobalt alloy was uniformly deposited on the surface of silicon carbide microparticles, which effectively improved the electromagnetic properties and microwave absorption of silicon carbide. There were two relaxation peaks of interfacial polarization (9.1 GHz) and defect polarization (13.8 GHz) in the permittivity imaginary part of silicon carbide, while two relaxation peaks of Co-Fe/SiC material were produced after the deposition: dielectric relaxation peak (11.7 GHz) and magnetic relaxation peak (12.6 GHz). The dielectric and magnetic loss of CoFe alloy to microwave signal effectively improved the absorption properties of the material. When the thickness of the absorbing layer was 2.4 mm, the absorption bandwidth with reflection loss 10 dB reached 3.8 GHz and 20 dB bandwidth could reach 1.5 GHz. When the absorbing layer thickness was 2.3 mm, the value of the maximum absorption peak was –43 dB at the frequency of 12.7 GHz. The deposition of ferrocobalt alloy on the surface of silicon carbide is an effective method to improve the microwave absorption performance of the material, and this material is an efficient broadband microwave absorbing material.

Preparation of mixed silicon carbide fiber with the function of absorbing microwaves

Mixed silicon carbide fiber and microwave-absorbing properties

Nano-SiC-decorated Y2Si2O7 Ceramic for Enhancing Electromagnetic Waves Absorption Performance

Silicon carbide nano-fibers in-situ grown on carbon fibers for enhanced microwave absorption properties

Simultaneously Enhancing Mechanical and Microwave Absorption Properties of Cf/SiC Composites Via SiC Nanowires Additions

Fine-diameter microwave-absorbing SiC-based fiber

Co-Fe Deposited SiC Microparticles and Its Microwave Absorbing Properties

Preparation And Microwave-Absorbing Properties Of Some Non-Circular Sic Fibers

Flexible Fe3Si/SiC ultrathin hybrid fiber mats with designable microwave absorption performance

Research on silicon carbide fibers with microwave absorbing properties

Enhanced Microwave-Absorbing Properties of FeCo Magnetic Film-Functionalized Silicon Carbide Fibers Fabricated by a Radio Frequency Magnetron Method

Gradient FeNi-SiO2 films on SiC fiber for enhanced microwave absorption performance

Anchoring of SiC and Fe3Si Nanocrystallines in Carbon Nanofibers Inducing Interfacial Polarization to Promote Microwave Attenuation Ability

Synthesis of SiC Nanofibers with Superior Electromagnetic Wave Absorption Performance by Electrospinning

Microwave-absorption Properties of Heterostructural SiC Nanowires/sioc Ceramic Derived from Polysiloxane

Synthesis and Microwave Absorption Properties of SiC Nanowires Reinforced SiOC Ceramic

PREPARATION OF SHAPED SILICON CARBIDE FIBERS WITH RADAR-ABSORBING FUNCTION

Enhanced electromagnetic wave absorption properties of a novel SiC nanowires reinforced SiO2/3Al2O3·2SiO2 porous ceramic

Dielectric Response and Microwave Absorbing Properties for Nano SiC Fiber Modified Chopped Carbon Fiber Reinforced Si3N4 Composites

PREPARATION OF TRILOBAL SiC FIBERS WITH RADAR-ABSORBING PROPERTIES

Molten-salt-mediated synthesis of SiC nanowires for microwave absorption applications