Abstract:This chapter is organized as three parts: in the first part, the vibroacoustic performance of a rectangular double-panel partition with enclosed air cavity and simply mounted on an infinite acoustic rigid baffle is investigated analytically. The sound velocity potential method rather than the commonly used cavity modal function method is employed, which possesses good expandability and has significant implications for further vibroacoustic investigations. The simply supported boundary condition is accounted for by using the method of modal function, and double Fourier series solutions are obtained to characterize the vibroacoustic behaviors of the structure. Results for sound transmission loss (STL), panel vibration level, and sound pressure level are presented to explore the physical mechanisms of sound energy penetration across the finite double-panel partition. Specifically, focus is placed upon the influence of several key system parameters on sound transmission, including the thickness of air cavity, structural dimensions, and the elevation angle and azimuth angle of the incidence sound. Further extensions of the sound velocity potential method to typical framed double-panel structures are also proposed.In the second part, the air-borne sound insulation performance of a rectangular double-panel partition clamp mounted on an infinite acoustic rigid baffle is investigated both analytically and experimentally, and compared with that of a simply supported one. With the clamped (or simply supported) boundary accounted for by using the method of modal function, a double series solution for the sound transmission loss (STL) of the structure is obtained by employing the weighted residual (Galerkin) method. Experimental measurements with Al double-panel partitions having air cavity are subsequently carried out to validate the theoretical model for both types of the boundary condition, and good overall agreement is achieved. A consistency check of the two different models (based separately on clamped modal function and simply supported modal function) is performed by extending the panel dimensions to infinite where no boundaries exist. The significant discrepancies between the two different boundary conditions are demonstrated in terms of the STL versus frequency plots as well as the panel deflection mode shapes.In the third part, an analytical model for sound transmission through a clamped triple-panel partition of finite extent and separated by two impervious air cavities is formulated. The solution derived from the model takes the form of that for a clamp-supported rectangular plate. A set of modal functions (or more strictly speaking, the basic functions) are employed to account for the clamped boundary conditions, and the application of the virtual work principle leads to a set of simultaneous algebraic equations for determining the unknown modal coefficients. The sound transmission loss (STL) of the triple-panel partition as a function of excitation frequency is calculated and compared with that of a double-panel partition. The model predictions are then used to explore the physical mechanisms associated with the various dips on the STL versus frequency curve, including the equivalent "mass-spring" resonance, the standing-wave resonance, and the panel modal resonance. The asymptotic variation of the solution from a finite-sized partition to an infinitely large partition is illustrated in such a way as to demonstrate the influence of the boundary conditions on the soundproofing capability of the partition. In general, a triple-panel partition outperforms a double-panel partition in insulating the incident sound, and the relatively large number of system parameters pertinent to the triple-panel partition in comparison with that of the double-panel partition offers more design space for the former to tailor its noise reduction performance.

Transmission loss of low-frequency random incidence sound-field transmitted from a rectangular panel into a rectangular enclosure. (2) Experimental part

On the transmission loss of a low frequency random incidence sound field from a rectangular panel into a rectangular enclosure. (I) Theoretical part

Transmission Loss of a Rectangular Panel into a Rectangular Enclosure in a Low Frequency Random Incidence Sound Field-I. Theoretical Part

Computer Simulation Model for Room Diffuse Sound Field

Transmission Of Sound Through Finite Multiple-Panel Partition

Sound Transmission Through a Finite-Sized Double Panel Cavity with a Micro-Perforated Panel Insertion

Analytical and Experimental Investigation on Transmission Loss of Clamped Double Panels: Implication of Boundary Effects

Sound transmission loss characteristics of single corrugated panel

Dynamic Response and Acoustic Radiation of Double-Leaf Metallic Panel Partition under Sound Excitation

Transmission Loss and Directivity of Sound Transmitted Through a Slit on Ground.

Sound Transmission Through Simply Supported Finite Double-Panel Partitions with Enclosed Air Cavity

Sound Field Excited by Panel Loudspeaker Simulation and Analysis of Rectangular Small Enclosure with FEM

Forced Sound Transmission Through a Finite-Sized Single Leaf Panel Subject to a Point Source Excitation

Analytical modeling of sound transmission through clamped triple-panel partition separated by enclosed air cavities

A Note on Using Panel Diffusers to Improve Sound Field Diffusivity in Reverberation Rooms below 100 Hz

A Study of the Sound Transmission Mechanisms of a Finite Thickness Opening Without or with an Acoustic Seal

STUDY ON SOUND INSULATION OF SOUND BARRIER PANELS

Sound transmission loss optimization of clamped double-panels

Numerical Study of Sound Transmission Loss Using an Indirect Boundary Element Method

Insert loss experiment and acoustic impedance theoretical study on the noise barrier with MPP-QRD top structure

Numerical study on sound transmission loss of porous rubber plate