Abstract:Science Progress, Volume 107, Issue 4, October-December 2024. Due to the advantages of high stiffness, high precision, high load capacity and large workspace, hybrid robots are applicable to drilling and milling of complicated components with large sizes, for instance car panels. However, the difficulty in establishing an exact dynamic model and external disturbances affect the high accuracy control directly, which will decrease the machining accuracy and thereby affect the machining quality and efficiency of the system. Sliding mode control is an effective approach for high-order nonlinear dynamic systems since that it is very insensitive to disturbances and parameter variations. However, chattering may exist in traditional sliding mode control with fixed parameters, which results from a constant approaching speed. Besides, the approaching speed will affect the chattering strength directly. To solve these problems, a modified sliding mode controller with self-adaptive parameters is proposed to enhance the trajectory-tracking performance of a 5-degree-of-freedom hybrid robot. Firstly, the kinematic model of the robot is established. Then adopting the principle of virtual work, a rigid dynamic model of the robot is built. Based on the built dynamic model, a modified sliding mode control method is developed, of which the approaching speed is dependent on the system state. Finally, the sliding mode controller with self-adaptive parameters is created for a hybrid robot. The proposed sliding mode controller can achieve a rapid approaching speed and suppress chattering simultaneously. Simulation results demonstrate that the proposed modified sliding mode controller can achieve a comparatively accurate and smooth trajectory, which owns good robustness to external disturbances.

Better variable structure model following control for Chinese industrial robot

A Novel Robotic Motion Control Strategy Based on Improved Fuzzy PID and Feedforward Compensation

Dynamic Modelling Using Screw Theory And Nonlinear Sliding Mode Control Of Serial Robot

Unified Motion/Force/Impedance Control for Manipulators in Unknown Contact Environments Based on Robust Model-Reaching Approach

Trajectory Control of Robot Manipulator Using Variable Structure Model-Reaching Control Strategy

Unified Formulation of Variable Structure Control Schemes for Robot Manipulators

Adaptive PID Saturate Output Feedback Control of Robot Manipulators

A model-free nonlinear output feedback controller for robot manipulators

PDAG Algorithm Based Trajectory Tracking for Industrial Robots

Robust approximate constraint-following control design based on Udwadia–Kalaba approach and experimental validation for the joint module of cooperative robot

Sliding mode control with self-adaptive parameters of a 5-DOF hybrid robot

Variable Structure Control of Constrained Robot Manipulators

Variable Structure Adaptive Motion and Force Control of Robot Manipulators

Industrial robot accurate trajectory generation by nested loop iterative learning control

An adaptive variable structure control of the robot satellite system with floating base in Cartesian space

Desired compensation adaptive robust repetitive control of a multi-DoFs industrial robot

Robot Variable Impedance Control and Generalizing from Human–Robot Interaction Demonstrations

Accurate Dynamic Modeling and Control Parameters Design of an Industrial Hybrid Spray-Painting Robot

Distributed Variable Structure Control With Sliding Mode For Free-Flying Space Robot

Adaptive PID control of multi-DOF industrial robot based on neural network

Redundant Robotic Arm Control Using Variable Structure Control System