Abstract:A series of diamine monomers, i.e., 2,2'-bis{4-[3,4,5-tris(n-alkan-1-yloxy)benzoate]}-4,4'-biphenyldiamines containing multiple alkyl side chains, were synthesized in which the length of the alkyl side chains was varied from 5 to 18 carbon atoms. Polyimides were prepared from the diamines and pyromellitic dianhydride (PMDA), 3,3'4,4'-biphenyltetracarboxylic dianhydride (BPDA), 2,2'-dibromo-4,4',5,5'-biphenyltetracarboxylic dianhydride (DBBPDA), and 2,2'-bis(3,4-dicarboxyphenyl)hexafluoropropane dianhydride (6FDA), respectively, using a one-step method in 1,2-dichlorobenzene or 1-chloronaphthalene. Most of the polymers had good solubility in chlorinated solvents. Several copolyimides were prepared: BPDA, 2,2'-bis(trifluoromethyl)benzidine (PFMB), and C14 and C16 diamines. The solubility of copolyimides was dramatically affected by different monomer addition sequences. The high-molecular-weight polyimides could be solution cast into flexible, tough films except for those based on PMDA. The side chains that contained at least 10 carbon atoms crystallized. The melting points of the crystalline regions increased as the length of the side chains increased. Variable-temperature (VT) solid state C-13 nuclear magnetic resonance (NMR) showed that the polyimide containing C18 side chains crystallized at room temperature. A wide-angle X-ray diffraction (WAXD) study showed that the spacing between the main chains increased as the number of carbon atoms in the side chains increased. The diameter of aggregated backbones was 2.14 nm, indicating several polyimide main chains stacked each other to form supermolecular, nanoscale structures. Three polyimides and one copolyimide were used to prepare alignment layers. The films generated liquid crystal pretilt angles of 6, 9, 90, and 90 degrees, respectively.

Synthesis And Properties Of Polyimides With Metallic Elements In The Main Chain

Preparation and Characterization of Metal-Containing Aromatic Polyimides

Synthesis of poly(propylene glycol)-grafted polyimide precursors and preparation of nanoporous polyimides

Preparation and characterization of aromatic polyimides derived from 4,4′-oxydiphthalic anhydride and 4,4′-diaminodiphenylmethane with different alkyl substituents

Synthesis and Characterization of Biphenyl Polyimide Containing Alkyl Sulfide Structure

Synthesis and the Magnetic Properties of Novel Metal (ii) Complexes of Polyamides

A Solid-State 13C N.m.r. Spectroscopic Study of Metal-Containing Polyimides

Syntheses and Properties of Novel Polyimides Derived from 2‐(4‐Aminophenyl)‐5‐aminopyrimidine

Study on Syntheses and Properties of Some Novel Polyimides Containing Bisthiazole Rings

Synthesis and Characterization of Polyimides Derived from 5-Amino-2(p-aminophenyl) Benzoxazole Monomer

Syntheses and Properties of Polyimides Derived from 2,5-Bis(4-aminophenyl)pyrimidine

Synthesis and Properties of Polyimides Containing Multiple Alkyl Side Chains

Preparation and properties of melt-processable polyimides based on fluorinated aromatic diamines and aromatic dianhydrides

Synthesis and Characterization of Addition-Type Polyimides Functionalized with Diamine Chromophore

Synthesis and Studies of Polyimide

Synthesis and Properties of a High‐molecular‐weight Poly(amic Acid) and Polyimide Based on 2,2‐Bis(3‐amino‐4‐hydroxyphenyl)hexafluoropropane

Novel Synthesis of Polyimide Foams with Aromatic and 1,6-Diaminohexane Imide Bonding

Preparation and Properties of Organo-Soluble Polyimides Based on 4,4 '-Diamino-3,3-dimethyldiphenylmethane and Conventional Dianhydrides

Preparation and Properties of Highly Organosoluble Polyimides Derived from 2,2′-Disubstituted-4,4′-oxydianilines

Synthesis and properties of novel polyimides based on 10,10-bis[4-(4-aminophenoxy)phenyl]-9(10H)-anthrone

Facile Synthesis of A Symmetrical Diamine Containing Bis-Benzimidazole Ring and Its Thermally Stable Polyimides