Approach of acquiring requirement information based on domain knowledge

Ruqian Lu,Zhi Jin,Ronglin Wan,Youming Xia

1996-01-01

Ruan Jian Xue Bao/Journal of Software

Abstract:A new approach of acquiring requirement information based on domain knowledge is proposed. PROMIS, the corresponding MIS development environment, has been applied to several application domains successfully.

What problem does this paper attempt to address?

Requirement specification in pseudo-natural language in PROMIS

Ruqian Lu,Zhi Jin,Ronglin Wan

DOI: https://doi.org/10.1109/CMPSAC.1995.524765

1995-01-01

Abstract:PROMIS, a knowledge-based tool for automatically prototyping MIS provided by us, is intended to deliver over the task of the requirement specification to the end users. It provides a pseudo-natural language for the end users to describe their own needs. PROMIS can then convert their requirements into an internal schema and then a MIS prototype automatically with the help of an internal domain knowledge base. After presenting an overview of PROMIS, this paper mainly focuses on the design and implementation of the requirement specification environment for the pseudo-natural language, including the syntax and the semantics of the language, the understanding and the analysing of it and the resulting internal conceptual model of MIS
A New Special-Domain And Stepwise Intelligent Development Method In Software Engineering

Xiaoping Qiu,Yang Xu,Yajun Du,Xiaohong Liu,Yongchuan Tang,Hua Zhu

DOI: https://doi.org/10.1109/icmlc.2004.1382204

2004-01-01

Abstract:Based on many achievements and experiences in artificial intelligence and software engineering about program design automation, a new special-domain and stepwise intelligent development method is proposed in this paper. Referencing to the lifecycle method and the prototype method, the intelligent developments of detail design, outline design and requirement analysis are discussed in detail successively. Then the relations among those three intelligent development steps are explained clearly. Finally, the characteristics and the advantages of this method are analyzed in depth, which shows that it is a feasible development way for intelligent information system.
Requirement Consistency and Integrity Verification Method based on Natural Language Processing

Chao Wu,Zhong Hua Huang,Yu Ting Yang,Yue Liu

DOI: https://doi.org/10.1088/1742-6596/1756/1/012002

2021-01-01

Journal of Physics: Conference Series

Abstract:Abstract In the iterative process of the update of the information service system, the continuous improvement of the system is restricted due to problems such as non-standard, incomplete, and strong ambiguity in the description of requirements. It makes it difficult to verify the consistency and integrity of requirements. In this paper, we focus on the huge requirements of complex information service system, and propose research on requirement itemized extraction and structured description technology based on natural language processing and requirement item keyword extraction and standardized expression technology. The library management system is used as the verification object to verify the effectiveness of the method proposed in this paper.
Approach to the measurement information modeling of product in manufacture procedure

Jinqiu Mo,Xiaojun Zhou,Yaodong Cheng

1998-01-01

Abstract:The purpose of the establishment of the model of measurement and detection information (MMDI) of product in manufacture procedure are expressed. The research foundation of MMDI is analyzed. The general and some special demands of the technique of MMDI are discussed. According to these, the related model of acquirement and expression of the information of measurement and detection are put forward, where the principle of concurrent engineering is followed and the artificial intelligence and unionization of human-machine and object oriented techniques are appreciated.
Automatically Acquiring the Requirements of Business Information Systems by using Business Ontology

Zhi Jin,D. Bell,F. G. Wilkie

1998-01-01

Abstract:Requirement elicitation is the most important parts in the development process of the Business Information Systems(BIS). Errors made at this stage are extremely expensive to correct when they are discovered during testing or during actual working. No ideal methods have been presented up to now. This paper proposes an approach for automatically acquiring the customers’ requirement by reusing the domain knowledge. Our knowledge base contains a business ontology and a set of generic domain models. By using this approach, the customers can describe their business information in a restricted natural language which do not contain any software terminology. And then, the construction of the application requirement specification can be divided into: selection of the domain, creation of the instance concepts, inheritance of the attributes and production of the specification. The construction algorithm has been given in this paper.
Automatically Multi-Paradigm Requirements Modeling and Analyzing: an Ontology-Based Approach.

Jin Zhi,Lu Ruqian,David A. Bell

DOI: https://doi.org/10.1360/02yf0093

2003-01-01

Science in China Series F Information Sciences

Abstract:There are several purposes for modeling and analyzing the problem domain before starting the software requirements analysis. First, it focuses on the problem domain, so that the domain users could be involved easily. Secondly, a comprehensive description on the problem domain will advantage getting a comprehensive software requirements model. This paper proposes an ontology-based approach for mod-eling the problem domain. It interacts with the domain users by using terminology that they can under-stand and guides them to provide the relevant information. A multiple paradigm analysis approach, with the basis of the description on the problem domain, has also been presented. Three criteria, i.e. the ra-tionality of organization structure, the achievability of organization goals, and the feasibility of organiza-tion process, have been proposed. The results of the analysis could be used as feedbacks for guiding the domain users to provide further information on the problem domain. And those models on the problem domain could be a kind of document for the pre-requirements analysis phase. They also will be the basis for further software requirements modeling.
Management Model on Requirement Information Oriented to Product Lifecycle

CUI Jian,QI Guo-ning,JI Yang-jian,GUQiao-xiang,SU Shao-hui,HU Hao

DOI: https://doi.org/10.3969/j.issn.1006-5911.2007.12.017

2007-01-01

Computer Integrated Manufacturing Systems

Abstract:To realize customer-requirement-centered information management in Product Lifecycle Management(PLM) system,requirement information management model oriented to PLM was put forward.Customer requirement information was integrated,and its flow chart was constructed with structure-sketch method.The information of three constitution dimensions was depicted in requirement management model.The model structures of three different layers were analyzed through matrix method, which included department band layer,collaboration band layer and system band layer.And model characteristics were depicted by semantic method.Relationship of model view-structure was studied through applying function formalization method,in which,the data flow view was the core,the mapping mechanism on view structure relationship was studied,and then,the storage structure on information model was expressed.Finally,example of steam turbine was applied to verify the model.Result revealed that the management model on requirement information provided the implementation strategy for latter phases in PLM system,such as design,manufacture and sale,etc,which maximally satisfied customer requirements.
From Knowledge Based Software Engineering to Knowware Based Software Engineering

RuQian Lu,Zhi Jin

DOI: https://doi.org/10.1007/s11432-008-0060-y

2008-01-01

Abstract:The first part of this paper reviews our efforts on knowledge-based software engineering, namely PROMIS, started from 1990s. The key point of PROMIS is to generate applications automatically based on domain knowledge as well as software knowledge. That is featured by separating the development of domain knowledge from the development of software. But in PROMIS, we did not find an appropriate representation for the domain knowledge. Fortunately, in our recent work, we found such a carrier for knowledge modules, i.e. knowware. Knowware is a commercialized form of domain knowledge. This paper briefly introduces the basic definitions of knowware, knowledge middleware and knowware engineering. Three life circle models of knowware engineering and the design of corresponding knowware implementations are given. Finally we discuss application system automatic generation and domain knowledge modeling on the J2EE platform, which combines the techniques of PROMIS, knowware and J2EE, and the development and deployment framework, i.e. PROMIS/KW**.
A Domain Knowledge Driven Approach for User Interface Software Development

Wang Haiying,Liu Shenquan

DOI: https://doi.org/10.1007/bf02945365

1991-01-01

Abstract:A domain knowledge driven user interface development approach is described. As a conceptual design of the user interface, the domain knowledge defines the user interface in terms of objects, actions and their relationships that the user would use to interact with the application system. It also serves as input to a user interface management system (UIMS) and is the kernel of the target user interface. The principal ideas and the implementation techniques of the approach is discussed. The user interface model, user interface designer oriented high-level specification notation, and the transformation algorithms on domain knowledge are presented.
An Ontology-Based Approach for Domain Requirements Elicitation and Analysis

Yuqin Lee,Wenyun Zhao

DOI: https://doi.org/10.1109/imsccs.2006.188

2006-01-01

Abstract:Domain requirements are fundamental for software reuse and are the product of domain analysis. This paper presents an ontology based approach to elicit and analyze domain requirements. An ontology definition is given out. Problem domain is decomposed into several sub problem domains by using subjective decomposition method. The top-down refinement method is used to refine each sub problem domain into primitive requirements. Abstract stakeholders are used instead of real ones when decomposing problem domain and domain primitive requirements are represented by ontology. Not only domain commonality, variability and qualities are presented, but also reasoning logic is used to detect and handle incompleteness and inconsistency of domain requirements. In addition, a case of 'spot and futures transaction' domain is used to illustrate the approach
A Hybrid Model of Requirement Acquisition Based on Consumer's Preferenceon for 3D Printing Cloud Service Platform

Jiashuang Fan,Suihuai Yu,Jianjie Chu,Fangmin Cheng

DOI: https://doi.org/10.1109/ihmsc.2018.00067

2018-01-01

Abstract:The purpose of this paper is to propose a model for solving the requirement acquisition based on consumer's preference on 3D printing cloud service platform, which is important for helping the designer to provide the impetus for design restructuring and upgrading. A design model is divided into three layers: consumer data mining layer, consumer data analysis layer and consumer preference acquisition layer. Consumer data analysis is based on Kansei engineering and BP neural network. And consumer's preference acquisition is based on Quality Function Deployment. Additionally, an application example is also introduced to illustrate the validity of the proposed method.
Customer Requirement Based on Customer Architecture Hierarchy and BP in Product Lifecycle Management System

CUI Jian,QI Guo-ning,JI Yang-jian,GU Qiao-xiang,SU Shao-hui,HU Hao

DOI: https://doi.org/10.3785/j.issn.1008-973x.2008.03.033

2008-01-01

Abstract:In order to analyze customer requirement information in detail,a management function structure of customer requirement facing product lifecycle management(PLM) system was proposed,and the theory for obtaining customer requirement and analyzing market requirement was studied.On the aspect of customer requirement acquisition,the customer architecture hierarchy(CAH) method was adopted to analyze the requirement information of product performance within the range of whole lifecycle;on the aspect of market requirement analysis,the requirement information was classed and identified intellectualized through segmenting the market structure and applying the principle of auto-organize and auto-adopting on BP neural networks.As the result,the requirement tendency and competence tendency were obtained.A case study of one costume company;by means of Matlab tool shows that CAH and BP two methods supply PLM enterprise the analyzed information on requirement structure effectively and enhance the customer satisfaction.
Model-driven Approach to Developing Domain Functional Requirements in Software Product Lines

J. Guo,Y. Wang,Z. Zhang,J. Nummenmaa,N. Niu

DOI: https://doi.org/10.1049/iet-sen.2010.0072

2012-01-01

IET Software

Abstract:Existing product requirements form a rich source for domain requirements analysis in software product lines (SPLs). Most existing domain analysis techniques depend on domain experts’ experience and manual operation to identify the commonalities and variabilities of product requirements. They often demand a high level of manual effort and a large up-front investment, which can present a prohibitive barrier for SPL adoption. This study proposes a model-driven approach to semi-automatically derive domain functional requirements (DFRs) from product functional requirements (PFRs). Based on the linguistic characterisation of a domain's action-oriented concerns, the authors apply Fillmore's semantic framework to functional requirements and define metamodels for PFRs and DFRs. Functional requirements of existing products are constructed as corresponding PFR models. Following the proposed merging and refinement rules, the authors approach automates the transformation from PFR models into DFR models by merging the same or similar PFRs and analysing their commonality and variability. The resulting DFR models can serve as an initial basis of the SPL. The authors demonstrate the authors approach using an example of a home security system (HSS) SPL and give a preliminary evaluation. The authors approach provides a rigorous model-based support for DFRs development and complements existing domain analysis techniques with less time and effort.
An exploratory study of the general requirement representation model for product configuration in mass customization mode

Y. X. Feng,B. Zheng,J. R. Tan,Z. Wei

DOI: https://doi.org/10.1007/s00170-008-1381-0

IF: 3.563

2008-01-01

The International Journal of Advanced Manufacturing Technology

Abstract:Product customization has been recognized as an effective means to implement mass customization (MC). Aiming at the shortcomings of the current methods in information capturing and describing, the general requirement modeling method for product configuration in MC mode is proposed. The detailed definition of the general requirement concept is put forward from several angles, including the time dimension, space dimension, feature dimension, etc., and the requirement information cell (RIC) method which fits the description of the general requirement information for the MC domain is also presented. Then, the formalized expressive framework of the RIC is given and the general requirement hierarchical model and correlative model of MC based on RIC is discussed. According to the application result, the formalized describing method of general requirement for MC has effectively supported the reuse of domain knowledge in the requirement modeling process for product configuration, as well as improved the standardization and intelligence of requirement information expression. This method’s utility, flexibility, and reliability has been verified through its application to the development of practical products.
Research on Software Requirement Management Based on Knowledge Management

LI Xiao-ming,SUN Lin-yan,WANG Ying-luo

DOI: https://doi.org/10.3969/j.issn.1004-8308.2005.02.005

2005-01-01

Abstract:Requirement management is a major issue in software development,which is closely related to success and failure of a project. In this paper,a concise introduction and a general procedure of requirement management are described. And based on knowledge management theory,a comprehensive analysis of requirement management process is shown. Finally,an effective strategy to improve requirement management is put forward based on knowledge management theory.
Domain Priori Knowledge Based Integrated Solution Design for Internet of Services

Hanchuan Xu,Xiao Wang,Yuxin Wang,Nan Li,Zhiying Tu,Zhongjie Wang,Xiaofei Xu

DOI: https://doi.org/10.1109/scc49832.2020.00065

2020-01-01

Abstract:Various types of services, such as web APIs, IoT services, O2O services, and many others, have flooded on the Internet. Interconnections among these services have resulted in a new phenomenon called "Internet of Services" (IoS). By IoS,people don't need to request multiple services by themselves to fulfill their daily requirements, but it is an IoS platform that is responsible for constructing integrated solutions for them. Since user requirements (URs) are usually coarse-grained and transboundary, IoS platforms have to integrate services from multiple domains to fulfill the requirements. Considering there are too many available services in IoS, a big challenge is how to look for a tradeoff between the construction efficiency and the precision of final solutions. For this challenge, we introduce a framework and a platform for transboundary user requirement oriented solution design in IoS. The main idea is to make use of domain priori knowledge derived from the commonness and similarities among massive historical URs and among historical integrated service solutions(ISSs). Priori knowledge is classified into three types: requirement patterns (RPs), service patterns (SPs), and probabilistic matching matrix (PMM) between RPs and SPs. A UR is modeled in the form of an intention tree (ITree) along with a set of constraints on intention nodes, and then optimal RPs are selected to cover the I-Tree as much as possible. By taking advantage of the PMM, a set of SPs are filtered out and composed together to form the final ISS. Finally, the design of a platform supporting the above process is introduced.
Knowware-Based Software Engineering

RuQian Lu,Zhi Jin

DOI: https://doi.org/10.4018/978-1-4666-6026-7.ch025

2014-01-01

Abstract:The first part of this chapter reviews the origin of knowware-based software engineering. It originates from the authors' experiences in finding new techniques for knowledge-based software engineering while performing PROMIS, a continuing project series from the 1990s. The key point of PROMIS is to generate applications automatically by separating the development of domain knowledge from that of software architecture, with an important innovation of acquiring and summarizing domain knowledge automatically based on the pseudo-natural language understanding techniques. However, during PROMIS development, the authors did not find an appropriate form for the separated domain knowledge. The second part of the chapter briefly describes how the authors came to the concept of knowware. They stated that the essence of knowware is its capacity as a commercialized form of domain knowledge. It is also the third major component of IT after hardware and software. The third part of the chapter introduces the basic concepts of knowware and knowware engineering. Three life cycle models of knowware engineering and the design of corresponding knowware implementations are given. The fourth part of the chapter introduces object-oriented mixware engineering. In the fifth part of the chapter, two recent applications of knowware technique regarding smart room and Web search are reported. As a further development of PROMIS, the sixth part of the chapter discusses knowware-based redesign of its framework. In the seventh part of the chapter, the authors discuss automatic application generation and domain knowledge modeling on the J2EE platform, which combines techniques of PROMIS, knowware, and J2EE, and the development and deployment framework (i.e. PROMIS/KW**).
Conceptual Application Domain Modelling

Bernhard Thalheim,Klaus-Dieter Schewe,Hui Ma

2009-01-01

Abstract:Application domain description precedes requirements engineering, and is the basis for the development of a software or information system that satisfies all expectations of its users. The greatest challenge in this area is the evolution of the application domain itself. In this paper we address this problem by explicit consideration of application cases that are defined by user profiles and intentions and the system environment, i.e. scope and context. User profiles and intentions are captured through the concept of persona. We show how the application domain description can be mapped to requirements and discuss engineering of application domain descriptions.
Mining and Analysis of Data Origin Relationship in Software Requirement Based on Subject-Predicate-Object Method (Spom)

H Wan,YX Zheng,L Li

DOI: https://doi.org/10.1142/9789812701534_0162

2005-01-01

Abstract:Requirement engineering covers all activities related to elicitation, specification and validation of business processes, in which data origin relationship is critical and important to elicit and describe user requirement. This paper proposes a new requirement elicitation and analysis method: Subject-Predicate-Object Method (SPOM) to mine and analyze data origin relationship, using Form Flow Diagram (FFD) as starting step and analyzing based on Data Origin Diagram (DOD), and presents the definitions, design steps and key steps analysis of FFD and DOD, with which preliminary data, data model and static data description of user requirement can be described clearly in requirement analysis phase. This method has been applied in one ERP project to mine and analyze data origin relationship of product storage business.

Approach of acquiring requirement information based on domain knowledge

Requirement specification in pseudo-natural language in PROMIS

A New Special-Domain And Stepwise Intelligent Development Method In Software Engineering

Requirement Consistency and Integrity Verification Method based on Natural Language Processing

Approach to the measurement information modeling of product in manufacture procedure

Automatically Acquiring the Requirements of Business Information Systems by using Business Ontology

Automatically Multi-Paradigm Requirements Modeling and Analyzing: an Ontology-Based Approach.

Management Model on Requirement Information Oriented to Product Lifecycle

From Knowledge Based Software Engineering to Knowware Based Software Engineering

A Domain Knowledge Driven Approach for User Interface Software Development

An Ontology-Based Approach for Domain Requirements Elicitation and Analysis

A Hybrid Model of Requirement Acquisition Based on Consumer's Preferenceon for 3D Printing Cloud Service Platform

Customer Requirement Based on Customer Architecture Hierarchy and BP in Product Lifecycle Management System

Model-driven Approach to Developing Domain Functional Requirements in Software Product Lines

An exploratory study of the general requirement representation model for product configuration in mass customization mode

Research on Software Requirement Management Based on Knowledge Management

Domain Priori Knowledge Based Integrated Solution Design for Internet of Services

Knowware-Based Software Engineering

Conceptual Application Domain Modelling

Mining and Analysis of Data Origin Relationship in Software Requirement Based on Subject-Predicate-Object Method (Spom)