Abstract:The biopharmaceutical market is driving the revolution from traditional batch processes to continuous manufacturing for higher productivity and lower costs. In this work, a batch mAb downstream process has been converted into an integrated continuous process with the combination of multiple techniques. For process intensification, two batch mode unit operations (protein A capture chromatography, ultrafiltration/diafiltration) were converted into continuous ones; for continuity, surge tanks were used between adjacent steps, and level signals were used to trigger process start or stop, forming a holistic continuous process. For process automation, manual operations (e.g., pH and conductivity adjustment) were changed into automatic operation and load mass was controlled with process analytical technology (PAT). A model-based simulation was applied to estimate the loading conditions for the continuous capture process, resulting in 21% resin capacity utilization and 28% productivity improvement as compared to the batch process. Automatic load mass control of cation exchange chromatography (CEX) was achieved through a customized in-line protein quantity monitoring system, with a difference of less than 1.3% as compared to off-line analysis. Total process time was shortened from 4 days (batch process) to less than 24 hours using the continuous downstream process with the overall productivity of 23.8 g mAb per day for the bench-scale system. Comparable yield and quality data were obtained in three test runs, indicating a successful conversion from a batch process to a continuous process. The insight of this work could be a reference to other similar situations.

Continuous counter-current aqueous two-phase extraction of protein-mass transfer coefficient in packed column

Antibody Capture with Twin-Column Continuous Chromatography: Effects of Residence Time, Protein Concentration and Resin

Model-based Process Development of Continuous Chromatography for Antibody Capture: A Case Study with Twin-Column System

Process design and application of twin-column continuous chromatography for antibody affinity separation

Adsorption of Protein in the Expanded Bed

Converting a Mab Downstream Process from Batch to Continuous Using Process Modeling and Process Analytical Technology.

Modeling the protein partitioning in aqueous polymer two-phase systems: Influence of polymer concentration and molecular weight

Evaluation of Mixed-Mode Chromatographic Resins for Separating Igg from Serum Albumin Containing Feedstock

Continuous Separation of Proteins by Poly(vinyl Alcohol) Shielded Multichannel Flow Electrophoresis

Mass transfer kinetics and breakthrough and elution curves for bovine serum albumin using cibacron blue cellulose membranes.

Continuous Counter-Current Multistage Microextraction in a Novel Tube-In-Tube Microextractor

Microdroplet-based continuous countercurrent extraction with high phase ratio

Mass transfer performance in a coalescence–dispersion pulsed sieve plate extraction column

Mass Fabrication of Capillary Columns Based on Centrifugal Packing

Hydrodynamics And Mass-Transfer Of A Sieve Plate Column For Liquid-Liquid-Extraction

Solubilization of proteins in aqueous two-phase extraction through combinations of phase-formers and displacement agents

Study on spiral tube continuous countercurrent extraction chromatography system

Extraction of tryptophan derivatives and bovine serum albumin in an aqueous two-phase system of cationic-anionic surfactant mixture

Continuous Separation of Proteins by Multichannel Flow Electrophoresis

Preparation of Weak Cation Exchange Monolithic Capillary Column and Its Application for Protein Separation

Study on performance of extraction column with complex packing