Abstract:In this work, a thorough study on the effects of sulfur-addition in the Cu50Zr50 glass-forming system was conducted using laboratory-based X-ray diffraction (XRD), synchrotron-based high-energy XRD (HESXRD), differential scanning calorimetry, and uniaxial compression testing. We report that the glass-forming ability (GFA), thermal stability, phase transformation sequence during heating and cooling, as well as the mechanical properties of the Cu50Zr50 system are highly sensitive to the sulfur concentration. Proper addition of sulfur can not only stabilize the B2-CuZr phase, but also enhances the GFA of the system. This enables the formation of BMG composites that solely contain a B2 phase, which results in a combination of high strength and substantial plastic strain under compressive loading. The total strains of the newly developed BMG composites with sulfur contents of 0.5 and 1.0 at.% are as large as ∼10 at.%, exceeding the previously reported strains of the Cu50Zr50 BMG by far. These superior properties make the Cu-Zr-S BMG composites a promising candidate material for industrial applications. In addition, it is found that excessive addition of sulfur leads to the precipitation of the Cu10Zr7 phase upon cooling from the alloy melt and a sulfide phase during heating from the glassy state. HESXRD experiments suggest that the preferential bonding between Zr and S atoms could be the determining structural mechanism on the atomic scale, leading to the changing primary crystallization sequence for heating and cooling. The findings in this work further strengthen the high relevance of sulfur in alloy development and tuning of properties in BMGs, especially considering the low cost, good availability, and non-toxicity of sulfur in the relevant modifications.

Valence electron theory of graphite spheroidizing in primary crystallization

Valence electron structure of cast iron and graphitization behaviour criterion of elements

Rapid Solidification of Non-Stoichiometric Intermetallic Compounds: Modeling and Experimental Verification

Wetting and Spreading Behavior of Molten Iron in Contact with Graphite Substrate: Interfacial Effects

Theoretical Model of Interstitial Diffusion in Solid Solution under Hypergravity Conditions

Revisiting the Crystallography of {225}γ Martensite: How EBSD Can Help to Solve Long-Standing Controversy

Carbon solute drag effect on the growth of carbon supersaturated bainitic ferrite: Modeling and experimental validations

The Valence Electron Criterion on Heterogeneous Nucleus Catalysis During Non-Equilibrium Solidification of Austenite Steel

Influence of graphite crystalline orientation on the carbon dissolution reaction in liquid iron: A ReaxFF molecular dynamics simulation study

Ab initio investigations of crystal transition for graphite intercalation compounds during aluminum electrolysiss

Valence electron model on heterogeneous nucleation of Au liquid and nuclei catalysis

The Electronic Structure of the Impurity Boron-Vacancy Complex in Transition Metal Γ-Fe

Crystal structure and stability of phases in Mg-Zn alloys: A comprehensive first-principles study

Electron Theory Analysis about the Influence of Cr and Mn on the Carbide Spheroidization by Heat Treatment

Ascertainment of the Hybridization States of Fe Atoms in Austenite and Martensite

Growth Mechanism of Graphite Spheroids from Nano- to Micro-Scale

A General Crystallographic Model of Fcc/Bcc(Bct) Martensitic Nucleation and Growth in Steels

Hall-Petch Relation in a Spheroidized Carbon Steel with Emphasis on the Effect of Intergranular Particles

Investigation on the Atomic Mechanism for Grain Refinement of Magnesium Alloys by Mg-Zr Master Alloy

Effects of Sb Content on Solidification Pathways and Grain Size of AZ91 Magnesium Alloy

Influence of sulfur addition on the glass formation, phase transformation and mechanical properties of Cu50Zr50 alloy