Abstract:Acoustic focusing has wide applications in many domains including non-destructive evaluation, medical diagnosis and particle manipulation. In the past decades, due to their outstanding ca-pacity of wave manipulation, acoustic metasurfaces (AMSs) based on various structures, such as coiling-up space structures, Helmholtz-resonator-like structures and membrane-type structures, have been proposed to achieve different functionalities including acoustic focusing. However, given their complex geometries and narrow channels, these structures inevitably cause fabrica-tion difficulties and limit energy transmission efficiency due to the thermoviscous loss. To overcome these drawbacks, a double layered acoustic grating (DLAG) is proposed in the paper to focus acoustic waves with high energy transmission efficiency. The DLAG consists of two layers of rigid panels with periodically perforated subwavelength slits on each layer. The surface coupling approach (SCA) which was proposed to predict the sound radiation in multiple connected spaces is employed to predict acoustic field through the DLAG. The widths of the slits and the cavity between the two layers of the DLAG can be optimized to converge the acoustic energy of an incident plane wave into a predefined focusing region, while the slits' spacing and the thickness of the DLAG are set to be a fraction of wavelength. Using a 3D printed DLAG with the optimized geometrical size, the acoustic focusing was validated experimentally, which show very good agreements with the prediction from the SCA.

Acoustic Focusing of Sub-Wavelength Scale Achieved by Multiple Fabry-Perot Resonance Effect

Acoustic Focusing by a Double Layered Acoustic Grating

Subwavelength Focusing by a Micro/nanofiber Array.

Experimental Verification of the Far-Field Subwavelength Focusing with Multiple Concentric Nanorings

Broadband Characterization of Near-Field Focusing with Groove-Structured Lens

Groove-structured Meta-Surface for Patterned Sub-Diffraction Sound Focusing

Broadband Ultrasonic Focusing in Water with an Ultra-Compact Metasurface Lens

Escalated Deep-Subwavelength Acoustic Imaging with Field Enhancement Inside a Metalens

Ultra-compact Ultrasonic Metalens for Underwater Focusing

Planar Focusing Lens for Enhanced Far-Field Ultrasonic Imaging.

3-D Underwater Acoustic Wave Focusing by Periodic Structure

Broadband Controllable Acoustic Focusing and Asymmetric Focusing by Acoustic Metamaterials

Acoustoelectric Conversion and Deep-Subwavelength Acoustic Focusing Based on Fresnel Zone Plates

Acoustic Focusing by Symmetrical Self-Bending Beams with Phase Modulations

Subwavelength Focusing with a Multilayered Fabry-Perot Structure at Optical Frequencies

Enhanced Sound Focusing With Single-Slit Lens

Broadband and high-numerical-aperture sharp focusing for waterborne sound with metagrating-based lens

Acoustic focusing and imaging via phononic crystal and acoustic metamaterials

A Collimated Focused Ultrasound Beam of High Acoustic Transmission and Minimum Diffraction Achieved by Using a Lens with Subwavelength Structures

Design and Characterization of an Acoustic Composite Lens with High-Intensity and Directionally Controllable Focusing

Multi-Frequency Acoustic Metasurface for Extraordinary Reflection and Sound Focusing