Abstract:A novel quasi-twisted miniaturized wideband branch line coupler (BLC) is proposed. The design is based on bisecting the conventional microstrip line BLC transversely and folding bisected sections on double-layered substrates with a common ground plane in between. The input and output terminals, each with a length of λg/4, and the pair of quarter-wavelength horizontal parallel arms are converted into a Z-shaped meandered microstrip line in the designed structure. Conversely, the pair of quarter-wavelength vertical arms are halved into two lines and transformed into a periodically loaded slow-wave structure. The bisected parts of the BLC are placed on the opposite side of the doubled-layer substrate and connected through four vias passing through the common ground plane. This technique enabled a compact BLC size of 6.4 × 18 mm2, which corresponds to a surface area miniaturization by ~50% as compared to the classical BLC size of 10 × 23 mm2 at 6 GHz. Moreover, the attained relative bandwidth is 73.9% (4.6–10 GHz) for S11, S33, S21, and the phase difference between outputs (∠S21 − ∠S41). However, if a coupling parameter (S41) of up to −7.5 dB is considered, then the relative bandwidth reduces to 53.9% (4.6–10 GHz) for port 1 as the input. Similarly, for port 3 as the input, the obtained bandwidth is 75.8% (4.5–10 GHz) for S33, S11, S43, and the phase difference between outputs (∠S43 − ∠S23). Likewise, this bandwidth reduces to 56% (4.5–8 GHz) when a coupling parameter (S23) of up to −7.5 dB is considered. In contrast, the relative bandwidth for the ordinary BLC is 41% at the same resonant frequency. The circuit is constructed on a double-layered low-cost FR4 substrate with a relative permittivity of 4.3 and a loss tangent of 0.025. An isolation of −13 dB was realized in both S13 and S31 demonstrating an excellent performance. The transmission coefficients between input/output ports S21, S41, S23, and S43 are between −3.1 dB to −3.5 dB at a frequency of 6 GHz. Finally, the proposed BLC provides phase differences between output ports of 90.5° and 94.8° at a frequency of 6 GHz when the input ports 1 and 3 are excited, respectively. The presented design offers the potential of being utilized as a unit cell for building a Butler matrix (BM) for sub-6 GHz 5G beamforming networks.

Miniaturized overlapped LC phase delay line

An Active Circulator-Based Delay Line

A Novel Dieletric Slot Stripline Structure for Millimeter Wave Flexible Printed Circuit

Miniaturization of Rat-Race Coupler With Dual-Band Arbitrary Power Divisions Based on Stepped-Impedance Double-Sided Parallel-Strip Line

Design of a compact rat-race coupler employing electromagnetic bandgap (EBG)-loaded and composite right/left-handed (CRLH) half-mode substrate integrated waveguides (HMSIWs)

A structure optimization for integrated binary reconfigurable true time delay lines

Low Loss Compact Meander Stripline Delay Lines Using LTCC

The Design of a Novel 2-42 GHz MEMS True-Time Delay Network for Wideband Phased Array Systems

0.1 THz Linear Group-Delay Engineered Transmission Line All-Pass Network with LTCC Substrate

Liquid Crystal-Filled 60 GHz Coaxially Structured Phase Shifter Design and Simulation with Enhanced Figure of Merit by Novel Permittivity-Dependent Impedance Matching

A COMPACT PHASE SHIFTER WITH WIDE PHASE RANGE USING LOADED TRANSMISSION LINE

CMOS 196 pico-second variable delay line incorporating active reflection-load in K-band

Compact CPW Spoof Surface Plasmon Polariton Transmission Line with Interdigital Structure

Design of time delay lines with periodic microstrip line and composite right/left-handed transmission line

Low-loss Wide-Bandwidth Planar Transmission Line with a Laminated Conductor

Variable Optical Delay Line Using Discrete Harmonic Oscillation in Waveguide Lattices

Broadband Self-Compensating Phase Shifter Combining Delay Line and Equal-Length Unequal-Width Phaser

A Novel Compact Broadband Quasi-Twisted Branch Line Coupler Based on a Double-Layered Microstrip Line

Design of Ultraflat Phase Shifters Using Multiple Quarter-Wavelength Short-Ended Stubs

A Dual-board Substrate Integrated Waveguide for Large Phase Delay Application

Compact 3-D Printed Phase-Shifting Coupler with Decoupling Column and Defected Ground Structures for Millimeter Wave Applications