Abstract:Laser-induced plasma ignition is a new ignition method to achieve stable and reliable ignition of liquid rocket engines. It has the advantages of accurate and controllable ignition position, broadening ignition lean-burn limit and small disturbance to flow field. In this paper, the laser ignition process and combustion characteristics of gas oxygen/gas methane under rocket engine conditions are studied from four aspects, namely different ignition positions, ignition energy, fuel-oxygen momentum ratio and chamber pressure. Using a high-speed camera, the dynamic process of ignition was captured by the shadow method, and the generation and propagation of laser-induced flame nuclei were recorded. The results show that at the airflow velocity of 300–400 m/s, the time required for the flame kernel to develop to the entire combustion chamber is about 300 μs, and the time for the flame to reach a steady state is tens of milliseconds. When the ignition energy is increased by 1.5 times, the time required for the flame kernel to develop from the recirculation zone to the mainstream zone is shortened to 1/3 of the original; with the increase of the fuel-oxygen momentum ratio, the shape of the initial flame kernel changes from round to oval, and the development speed of the flame kernel also increases. The fuel-oxygen momentum ratio increases from 0.59 to 2.75, and the time required for the flame kernel to develop from the recirculation zone to the mainstream zone decreases from 167 μs to 56 μs＀ Except chamber pressure, other factors have no effect on the pressure rise rate of the ignition process, and the higher the chamber pressure, the faster the pressure rise rate; in order to avoid deflagration, the shear layer is more suitable as the ignition position. With the increase of ignition energy, fuel-oxygen momentum ratio and chamber pressure, the development speed of flame kernel increases, but the shape and development process of flame kernel will be different under the influence of different factors.

Laser ablation ignition of premixed methane and oxygenenriched air mixtures using a tantalum target

Combustion Characteristics and Laminar Flame Speed of Premixed Ethanol-Air Mixtures with Laser-Induced Spark Ignition

Laser Ablation Plasma-Assisted Stabilization of Premixed Methane/air Flame

Repetitive Laser-Induced Plasma Ignition and Assisted Combustion of Premixed Methane/Air Flame

Ignition and Stabilization of a Premixed Methane/air Flame with Repetitive Laser-Induced Plasmas

Laser Induced Spark Ignition of Coaxial Methane/Oxygen/Nitrogen Diffusion Flames

Research on laser induced plasma ignition of gas oxygen/methane

Laser Spark Ignition of LOX/LCH4 Propellant on an Optically-Accessible Combustor

Laser-induced Spark Ignition of H 2 /O 2 /ar Mixtures

Stabilization of Premixed High Flow Speed Methane/Air Flames Using A Nanosecond Laser Induced Plasma

Shock Wave Propagation and Flame Kernel Morphology in Laser-Induced Plasma Ignition of CH<sub>4</sub>/O<sub>2</sub>/N<sub>2</sub> Mixture

Experimental Investigation of Low-Temperature Autoignition in Turbulent Premixed Swirling Flames

Fire Extinguishing Performance Evaluation of the Downward Water Mist to Methane-Air Premixed Laminar Flame

Review of Laser Ignition for Methane-Air Mixtures

Stabilization of a Premixed Methane-Air Flame with a High Repetition Nanosecond Laser-Induced Plasma

Laser-Induced Particle Jet and Its Ignition Application in Premixed Combustible Gases

Experimental study of ignition and combustion characteristics assisted by laser-induced plasma during oxy-coal atmosphere by optical emission spectroscopy

Flame Kernel Evolution and Shock Wave Propagation with Laser Ignition in Ethanol-Air Mixtures

Plasma-assisted Combustion of Methane Using a Femtosecond Laser

Theoretical Investigation of Ignition with Lasers

Initial response and combustion behavior of microscale Al/PTFE energetic material by nanosecond laser ignition