The Early Age Hydration Products and Mechanical Properties of Cement Paste Containing GBFS under Steam Curing Condition
Baoliang Li,Zhouyang Tang,Binbin Huo,Zejun Liu,Yongzhen Cheng,Baizhan Ding,Peng Zhang
DOI: https://doi.org/10.3390/buildings12101746
IF: 3.324
2022-10-21
Buildings
Abstract:The hydration products and strength of cement pastes incorporated with ground blast furnace slag (GBFS) (0% and 20% replacement) have been investigated under steam curing condition (80 °C for 7 h and 7 d) in comparison with normal curing condition (moist curing for 28 d). The results show that, during the initial 80 °C steam curing for 7 h, in addition to the filler effect, GBFS is still involved in cement hydration. The abundant available Al phase and Mg phase in GBFS promote the formation of flake-like hydrotalcite, foil-like C-(A)-S-H gels, as well as equant grain-shaped C-(A)-S-H gels. Prolonging the steam curing time to 7 d further improves the formation of hydrogarnet. Since the formation of both hydrogarnet and hydrotalcite can consume the available Al, steam curing for 7 d seems to favor the formation of low Al C-(A)-S-H gels. In addition, due to the formation of a large amount of hydration products, the influence of 20% GBFS addition on the demolding strength of initial steam-cured cement mortar (80 °C for 7 h) is almost negligible. However, further extending the steam curing time to 7 d increases the strength gap between 20% GBFS blended cement mortar and pure cement mortar, and the related mechanism is discussed.
construction & building technology,engineering, civil