Abstract:The super absorbent polymer (SAP) has been attracting extensive concerns due to its strong capacity in water absorption and retention. The amorphous hydrogels formed by the post-absorbent SAP have the potential of clogging the micro-cracks in asphalt materials and refraining the rainwater from infiltrating. This provides the possibility of applying SAP in asphalt pavements to seal or fill the cracks and relieve the distresses caused by rainwater infiltration in the underlying layers. Before exploring the cracking sealing mechanism of SAPs in asphalt pavements, a series of experiments were performed to evaluate the feasibility and influences of SAPs in asphalt mastics and asphalt mixtures on their mechanical performances and functionalities. Firstly, the basic properties of SAPs were analyzed, and then the rheological properties of the asphalt mastics using SAP replacing mineral powder (10%, 20%, 30%, and 40% by volume) were explored. The water stability and infiltration reduction effect of the asphalt mixtures incorporated with SAP were evaluated by the Marshall stability test, immersion Marshall stability test, freeze-thaw splitting strength test, Cantabro test, and permeability test. The test results indicated that SAPs could be used in the asphalt mixtures to partially substitute mineral powder with desirable mechanical performances. When less than 10% of the mineral powder was replaced by the SAP, the high-temperature performance and fatigue life of the asphalt mastics could be improved to some extent, but both declined after the content of the SAP was larger than 10%. Due to the hydrogels formed by SAPs after water absorption, the water stability of the asphalt mixtures deteriorated with the increased content of SAPs. Moreover, the results from the permeability tests implied that the SAP hydrogels could fill the seepage channels in the material, thus improving the migration and infiltration resistances of the asphalt mixtures. With the increased contents of SAPs, the permeability coefficients of the asphalt mixtures could be reduced up to 55%. Based on the research findings in this study, when an appropriate amount of SAP was added in the asphalt materials, desirable temperature stability, water stability, and fatigue resistance could be achieved regarding actual requirements from applications. At the same time, the addition of SAPs could effectively refrain the infiltration and migration of rainwater in asphalt pavements, thus potentially mitigating the effect of water erosion on the underlying layers.

Experimental Study on Performance of Large Stone Permeable Asphalt Mixtures

Structural Mechanics Analysis of Asphalt Pavement Using Large Stone Asphalt Mixture As Base

Experimental Study on Pavement Performances of SBP Modified Asphalt

Feasibility Evaluation of Preparing Asphalt Mixture with Low-Grade Aggregate, Rubber Asphalt and Desulphurization Gypsum Residues

Performance Enhancement of Porous Asphalt Pavement Using Red Mud As Alternative Filler

Mechanical Performance Characterization of Lignin-Modified Asphalt Mixture

Mix Design and Field Detection of Large-Particle-Size Graded Crushed Stone Mixtures for Pavement Reconstruction

Performance Evaluation of Dense Mixtures with Stabilised Rubber Modified Asphalt

Effect of Skeleton Networks on the Bearing Capacity of Large Stone Porous Asphalt Mixes Using the Discrete Element Method

Study on Compaction Properties and Skeleton Structural Characteristics of Porous Asphalt Mixture

Effect of filler on performance of porous asphalt pavement using multiscale finite element method

Performance of asphalt mortar with recycled concrete powder under different filler-to-asphalt weight ratios

State-of-the-art of porous asphalt pavement: Experience and considerations of mixture design

Research on Influence of Aggregate Gradation on the Performance of Porous Asphalt Pavement

Research on Low-Cost High-Viscosity Asphalt and Its Performance for Porous Asphalt Pavement

Field Measurement and Analysis on the Mechanical Response of Asphalt Pavement Using Large-Particle-Size Crushed Stone Base Treated with Fly Ash and Slag Powder

Study of Decay Mechanisms and Rules of Recycled Asphalt Pavement via a Full-Scale Experiment

Performance Analysis of Bio-Based Asphalt Mixtures Containing Lignin

Investigation on Performances and Functions of Asphalt Mixtures Modified with Super Absorbent Polymer (SAP)

Designing of an anti-rutting and High Ductility Asphalt Mixture based on mortar performance

Experimental study of high modulus asphalt mixture containing reclaimed asphalt pavement