Abstract:There is abundant of vibration energy in environment. Using piezoelectric energy harvesters to power ultra-low power wireless sensors has become a hot topic in recent years. Most piezoelectric energy harvesters have satisfactory output only at one resonant frequency, while once the external excitation frequency deviates from the resonant frequency, the voltage output will drop significantly. Therefore, this paper proposes a bridge-shaped piezoelectric energy harvester to broaden the frequency band for energy harvesting, and the harvester can adaptively adjust the natural frequency of the system to match the external excitation. Based on the two-dimensional nonlinear Euler–Bernoulli beam hypothesis and the Hamilton principle, the distributed-parameter dynamic model of the nonlinear energy harvesting system is set up. By use of variation operator and nondimensionalization, we derive the dimensionless electromechanical coupling equations. With the harmonic balance method, the approximate equations for calculating voltage amplitude and average power are derived. And then the model is numerically solved and analyzed by considering the influence of excitation frequency, excitation amplitude, mass position and load on the output performance of the bridge-type piezoelectric energy harvester. Finally, various comprehensive experiments are performed to verify the results of simulation, and the dynamic effects of the moving mass on the output characteristics are studied. It can be noted that the moving mass can improve the voltage output of the bridge type energy harvester by changing the resonant frequency of the bridge-type piezoelectric energy harvester and impacting the piezoelectric beam. The proposed vibration energy collection device can adaptively tune the resonant frequency and has practical value in engineering.

Study on a novel tunable piezoelectric energy harvesting structure

Research on a Tunable Piezoelectric Energy Scavenging Structure

A Novel Frequency Tunable Mechanism for Piezoelectric Energy Harvesting System

Harvesting vibration energy through a cantilever beam with enhanced harvesting capability

An Improved Tunable Piezoelectric Energy Harvesting Structure Based on d33 Mode Coupling

Energy Harvesting By Dynamic Unstability And Internal Resonance For Piezoelectric Beam

Research on Uniform-strain Piezoelectric Energy Harvesting Mechanism

Harvesting Weak Vibration Energy by Integrating Piezoelectric Inverted Beam and Pendulum

Harvesting Vibration Energy by Novel Piezoelectric Structure with Arc-Shaped Branches

A Collision Impact Based Energy Harvester Using Piezoelectric Polyline Beams with Electret Coupling

Improving Energy Harvesting from Cantilever-like Structures Based on Beam Geometry

Study on the Energy Harvesting Performance of PE Cantilever Beam

A piezoelectric energy harvester with increased bandwidth based on beam flexural vibrations in perpendicular directions.

Design and Experimental Investigation of a T-shaped Piezoelectric Energy Harvester

Study on Characteristics of the Piezoelectric Energy-Harvesting from the Torsional Vibration of Thin-Walled Cantilever Beams

Simulation and Experiment on Bridge-Shaped Nonlinear Piezoelectric Vibration Energy Harvester

Experimental study on broadband bistable energy harvester with L-shaped piezoelectric cantilever beam

Study on Mechanical-Electric Characteristics of a Cantilever Beam of a Composite PZT Patch

Modeling and Experiment of a V-Shaped Piezoelectric Energy Harvester

Piezoelectric Cantilever-Pendulum for Multi-Directional Energy Harvesting with Internal Resonance

An energy harvester with nanoporous piezoelectric double-beam structure