Abstract:With the rapid development of the economy and the demands of people's lives, the usage amount of polymer materials is significantly increasing globally. Chlorobenzenes (CBS) are widely used in the industrial, agriculture and chemical industries, particularly as important chemical raw materials during polymers processes. CBS are difficult to remove due to their properties, such as being hydrophobic, volatile and persistent and biotoxic, and they have caused great harm to the ecological environment and human health. Electrochemical oxidation technology for the treatment of refractory pollutants has been widely used due to its high efficiency and easiness of operation. Thus, the electrochemical oxidation system was established for the efficient treatment of monochlorobenzene (MCB) waste gas. The effect of a single factor, such as anode materials, cathode materials, the electrolyte concentration, current density and electrode distance on the removal efficiency (RE) of MCB gas were first studied. The response-surface methodology (RSM) was used to investigate the relationships between different factors' conditions (current density, electrolyte concentration, electrode distance), and a prediction model was established using the Design-Expert 10.0.1 software to optimize the reaction conditions. The results of the one-factor experiments showed that when treating 2.90 g/m3 MCB gas with a 0.40 L/min flow rate, Ti/Ti4O7 as an anode, stainless steel wire mesh as a cathode, 0.15 mol/L NaCl electrolyte, 10.0 mA/cm2 current density and 4.0 cm electrode distance, the average removal efficiency (RE), efficiency capacity (EC) and energy consumption (Esp) were 57.99%, 20.18 g/(m3·h) and 190.2 (kW·h)/kg, respectively. The results of the RSM showed that the effects of the process parameters on the RE of MBC were as follows: current density > electrode distance > electrolyte concentration; the interactions effects on the RE of MBC were in the order of electrolyte concentration and current density > current density and electrode distance > electrolyte concentration and electrode distance; the optimal experimental conditions were as follows: the concentration of electrolyte was 0.149 mol/L, current density was 18.11 mA, electrode distance was 3.804 cm. Under these conditions, the RE achieved 66.43%. The response-surface variance analysis showed that the regression model reached a significant level, and the validation results were in agreement with the predicted results, which proved the feasibility of the model. The model can be applied to treat the CBS waste gas of polymer processes through electrochemical oxidation.

Influence Factors Analysis of Chloronitrobenzene Degradation in Biocatalyzed Electrolysis Systems

The effect of C/N ratio on nitrogen removal in a bioelectrochemical system.

Application of Pd/C Catalyst to Degradation and Utilization of Nitrobenzene in Water

Electron Fluxes in Biocathode Bioelectrochemical Systems Performing Dechlorination of Chlorinated Aliphatic Hydrocarbons

Electrical Stimulation Accelerated Phenanthrene Biodegradation Coupling with Nitrate Reduction in Groundwater

Ozonation degradation of nitrochlorobenzene isomers in aqueous solution: i. discuss of kinetics and processes

Strong coupling approach to actinide metals.

Integrated constructed wetland and bioelectrochemistry system approach for simultaneous enhancment of p-chloronitrobenzene and nitrogen transformations performance

Research on the electrochemical treatment of nitrobenzene wastewater: The effects of process parameters and the mechanism of distinct degradation pathways

P-Nitrophenol Degradation By Electrochemical Oxidation In The Presence Of Nacl

Optimization of a Bioelectrochemical System for 2,4-Dichloronitrobenzene Transformation Using Response Surface Methodology

Combining Chemical and Biological Oxidation for Sustainable Treatment of Chloronitrobenzene in Anoxic Groundwater

Enhanced Electrocatalytic Dechlorination of Para-Chloronitrobenzene Based on Ni/Pd Foam Electrode

Rapid Degradation of 2,4-Dichloronitrobenzene in Single-Chamber Microbial Electrolysis Cell with Pre-Acclimated Bioanode: A Comprehensive Assessment.

Electrochemical Degradation of Bisphenol A in Chloride Electrolyte—factor Analysis and Mechanisms Study

The Efficiency and Mechanism of the Degradation of Nitrobenzene in Aqueous Solution by O3/H2O2

Synergistic effect of bioanode and biocathode on nitrobenzene removal: Microbial community structure and functions

Electrochemical Degradation of Nitrobenzene Wastewater: From Laboratory Experiments to Pilot-Scale Industrial Application

Enhanced Reductive Transformation of P-Chloronitrobenzene in a Novel Bioelectrode-Uasb Coupled System.

Cathode Potential Regulation in a Coupled Bioelectrode-Anaerobic Sludge System for Effective Dechlorination of 2,4-Dichloronitrobenzene.

Treatment of Monochlorobenzene from Polymers Process through Electrochemical Oxidation