Abstract:Preparation of (A) Polyolefin elastomer/ethylene vinyl acetate (POE/EVA) films and (B) POE/EVA/ultra‐high molecular weight polyethylene (UHMWPE) composites with twin screw extrusion and hot‐press process. Polyolefin elastomer (POE) films can be used as a matrix for ultra‐high molecular weight polyethylene (UHMWPE) fiber‐reinforced composites via a hot‐melt process. However, the low melting temperature of UHMWPE limits composite processing. Therefore, this study aimed to create a film by blending POE with ethylene vinyl acetate (EVA) to reduce the film's processing temperature. Morphological analysis revealed that due to limited compatibility, EVA appeared as droplets within the immiscible POE matrix. T‐Peel tests demonstrated increased self‐adhesion in both the POE/EVA films and the fiber‐reinforced composites with higher EVA content. However, the mechanical properties of POE/EVA films, including tensile properties and shore hardness, were reduced due to EVA having lower inherent properties. UHMWPE fiber‐reinforced composites were fabricated from these films. In composites, optimal tensile and flexural properties were observed at lower EVA content. Scanning electron microscopy analysis suggests that the POE/EVA films are sufficiently infiltrated at 10–20 wt% EVA content. As EVA content increased, the drop weight impact test indicated a reduction in the maximum impact load and an increase in impact energy, attributed to improved adhesion and a broader distribution of impact load across the interface. Highlights Polyolefin elastomer/ultra‐high molecular weight polyethylene composites' properties were studied with varying ethylene vinyl acetate (EVA) additive content. Add EVA to improve film impregnation when forming composites Increase in impregnation affects increase in properties of composites. Characterization shows that the optimal EVA content is 10–20 wt%.

In Situ Biaxial Stretching for the Platelet Formation of an Ethylene–vinyl Alcohol Copolymer Through Multistage Stretching Extrusion and Its Effect on the Gas‐barrier Properties of Polyethylene

Structure Evolution and Properties Enhancement of Polyamide‐6/polyamide‐1010 Films under Uniaxial and Biaxial Stretching

The Microstructure-Tensile Property Relationship of Polyethylene Resin for Biaxially Stretched Film

Viscoelastic Effects on the Phase Separation in Thermoplastics-Modified Epoxy Resin

Plasticizer Effect of Dibutyl Phthalate on the Morphology and Mechanical Properties of Hard Elastic Poly(Vinylidene Fluoride) Fibers

Enhanced Multiphase Interfacial Interaction of Impact Polypropylene Copolymer by In-Situ Introducing Polyethylene

Morphology, rheology, and mechanical properties of polylactide/ poly(ethylene-co-octene) blends

Biaxially stretched polyamide 6/ethylene vinyl alcohol copolymer films with improved oxygen barrier and mechanical properties

Preparation of high melt strength polypropylene by the reactive extrusion process and its foaming application

EFFECTS OF COMPATIBILIZER AND POST-EXTRUSION STRETCHING ON PROPERTIES OFPLASTIC BARRIER FILMS

Effect of biaxial stretching on the microstructure evolution, optical, mechanical and oxygen barrier properties of biodegradable poly(lactic acid) (PLA)/poly(butylene adipate- co -terephthalate) (PBAT) films

Stretch-induced crystalline structural evolution and cavitation of poly(butylene adipate-ran-butylene terephthalate)/poly(lactic acid) immiscible blends

High-order Structure Formation of COP/LLDPE Bi-layer Film During Uniaxial/Biaxial Stretching

Structural Evolution of Hard-Elastic Polyethylene Cast Film in Temperature-Strain Space: an In-Situ SAXS and WAXS Study

Improved processability for ultra‐high molecular weight polyethylene/polyolefin elastomer composites: Effect of ethylenevinyl acetate copolymer

Effect of Mixing Poly(lactic Acid) with Glycidyl Methacrylate Grafted Poly(ethylene Octene) on Optical and Mechanical Properties of the Blown Films

The Chain Microstructure And Condensed Structure Of Polyethylene Resin Used For Biaxially Stretched Film

Mechanical Energy and Thermal Effect Controlled Micropore Nucleation and Growth Mechanism in Oriented High Density Polyethylene

In-Situ Bubble Stretching Assisted Melt Extrusion for the Preparation of HDPE/UHMWPE/CF Composites

Achieving super-tough high-density polyethylene with promising foamability using silane crosslinked polyolefin elastomer nanofibrils network

Evolution of the cavity structure of HDPE/UHMWPE blends during cold stretching