Abstract:Despite significant advances in the development of high-efficiency and stable quantum dot (QD) solar cells (QDSCs), recent synthetic and fabrication routes still require improvements to render QDSCs commercially feasible. Here, we describe a low-cost, industrially viable fabrication method of QDSCs under an ambient atmosphere (humid air and room temperature) using stable, high-quality, and small-sized PbS QDs prepared with low-cost, greener precursors [i.e., thioacetamide (TAA)] compared to the widely used bis(trimethylsilyl)sulfide [(TMS)2S], at low temperatures without requiring any stringent conditions. The low reaction temperature, medium reactivity of TAA, and diffusion-controlled particle growth adopted in this approach provide an opportunity to synthesize ultrasmall (emission peak ∼700 nm) to larger PbS QDs (emission peak ∼1050 nm). This also enables well-controlled large-scale (multigram) synthesis with a rough estimated production cost of PbS of 8.11 $ per gram (based on materials cost), which is the lowest among the available PbS QDs produced using wet chemistry routes. QDSCs fabricated using 3.25 nm PbS QDs (bandgap 1.29 eV) under ambient conditions yield a high circuit current density (Jsc) of 32.4 mA/cm2 (one of the highest values of Jsc ever reported) with a power conversion efficiency of 7.8% under 1 sun simulated sunlight at AM 1.5 G (100 mW/cm2). These devices exhibit better photovoltaic performance compared to devices fabricated with more traditional PbS QDs synthesized with (TMS)2S under an ambient atmosphere, confirming the quality of PbS QDs produced with our method. The diffusion-controlled TAA-based synthetic route developed herein is found to be very promising for synthesizing size-tunable PbS QDs for photovoltaic and other optoelectronic applications.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsami.0c06694?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsami.0c06694</a>.Additional TEM images, current density–voltage, stability, and reproducibility data. Particle and cost calculation estimations (<a class="ext-link" href="/doi/suppl/10.1021/acsami.0c06694/suppl_file/am0c06694_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Diffusion-Controlled Synthesis Of Pbs And Pbse Quantum Dots With In Situ Halide Passivation For Quantum Dot Solar Cells

PbSe Quantum Dot Solar Cells with More Than 6% Efficiency Fabricated in Ambient Atmosphere

Heterogeneous System Synthesis of High Quality PbS Quantum Dots for Efficient Infrared Solar Cells

A New Passivation Route Leading to over 8% Efficient PbSe Quantum‐Dot Solar Cells Via Direct Ion Exchange with Perovskite Nanocrystals

PbSe Quantum Dot Solar Cells Based on Directly Synthesized Semiconductive Inks

In Situ Formation of Iodide Precursor for Perovskite Quantum Dots with Application in Efficient Solar Cells

In Situ Tuning the Reactivity of Selenium Precursor to Synthesize Wide Range Size, Ultralarge-Scale, and Ultrastable PbSe Quantum Dots

Lead Selenide (pbse) Colloidal Quantum Dot Solar Cells with >10% Efficiency

Cation‐Exchange Enables In Situ Preparation of PbSe Quantum Dot Ink for High Performance Solar Cells

Facile one-step fabrication of CdS<sub>0.12</sub>Se<sub>0.88</sub> quantum dots with a ZnSe/ZnS-passivation layer for highly efficient quantum dot sensitized solar cells

Metal Halide Solid-State Surface Treatment for High Efficiency PbS and PbSe QD Solar Cells

Low-Cost, Air-Processed Quantum Dot Solar Cells via Diffusion-Controlled Synthesis

Octahedron Shaped Lead Sulfide Nanocrystals As Counter Electrodes for Quantum Dot Sensitized Solar Cells

In Situ Passivation for Efficient PbS Quantum Dot Solar Cells by Precursor Engineering

Engineering the Optoelectronic Properties of Colloidal Alloyed Copper Chalcogenide Quantum Dots for High‐Efficiency Solar Energy Conversion

Controlled Synthesis Of Near-Infrared Quantum Dots For Optoelectronic Devices

Optimizing Surface Passivation of n‐Type Quantum Dots for Efficient PbS Quantum Dot Solar Cells

Over 15% Efficiency PbS Quantum‐Dot Solar Cells by Synergistic Effects of Three Interface Engineering: Reducing Nonradiative Recombination and Balancing Charge Carrier Extraction

Low Cost and Large Scale Synthesis of PbS Quantum Dots with Hybrid Surface Passivation

Embedding PbS Quantum Dots (qds) in Pb-Halide Perovskite Matrices: QD Surface Chemistry and Antisolvent Effects on QD Dispersion and Confinement Properties

Facile one-step fabrication of CdS0.12Se0.88 quantum dots with a ZnSe/ZnS-passivation layer for highly efficient quantum dot sensitized solar cells