Abstract:A novel synergistic flame retardant agent containing boron and silicon, namely polyborosiloxane (PBSil), was prepared via the condensation reaction of boric acid (BA), tetraethoxysilane (TEOS), and octamethyl cyclotetrasiloxane (OMCTS). The obtained PBSil was then combined with an intumescent flame retardant (IFR) to flame retard polypropylene (PP), and the effects of PBSil on the flame retardancy and thermal degradation of the PP/IFR composite were investigated. It was found that PBSil could improve the compatibility between the IFR and the PP matrix, thereby improving the mechanical properties of the composite. Compared with zinc borate, zeolite, and nano-silica, PBSil showed much better flame retardancy and smoke suppression in the PP/IFR composite. When the content of PBSil was 3.0wt%, the limiting oxygen index (LOI) value of the flame retardant PP was increased from 29.0% to 35.0%, and the UL-94 rating was improved from V-1 to V-0 rating. Simultaneously, the heat release rate (HRR) and smoke production rate (SPR) of the composite were decreased dramatically. The thermogravimetric (TG) analysis, Fourier transform infrared (FTIR), and thermogravimetry-Fourier transform infrared spectrometry (TG-FTIR) results showed that, PBSil could enhance the thermostability of the IFR, and promote the char formation. Furthermore, the compactness and thermostability of the intumescent char were significantly improved, contributing to the improvement of the flame retardancy of the composite.

Preparation and Characterization of Polyborosiloxanes and Their Blends with Phenolic Resin As Shapeable Ceramic Precursors

Improved Thermal Stabilities, Ablation and Mechanical Properties for Carbon Fibers/Phenolic Resins Laminated Composites Modified by Silicon-containing Polyborazine

Preparation of polyborosiloxanes with systematically changed mechanical properties and correlation of their structure/property relationship

High-Temperature Resistant Polyborosilazanes with Tailored Structures

High Boron Content and Soluble Polyborosilazanes to Amorphous SiBCN Ceramics

Synthesis, Cure and Pyrolysis Behavior of Heat‐resistant Boron‐silicon Hybrid Polymer Containing Acetylene

Phenolic Resin Modified by Boron-Silicon with High Char Yield

Synthesis of Structure-Controlled Polyborosiloxanes and Investigation on Their Viscoelastic Response to Molecular Mass of Polydimethylsiloxane Triggered by Both Chemical and Physical Interactions

Preparation of boron-containg hybridized silicon rubber by in-situ polymerization of vinylphenyl-functionalized polyborosiloxane and liquid silicone rubber

Effect of Polyborosiloxane on the Flame Retardancy and Thermal Degradation of Intumescent Flame Retardant Polypropylene

Preparation and Flame Retardancy of Polyborosiloxane

Fine-diameter Si–B–C–N ceramic fibers enabled by polyborosilazanes with N–methyl pendant group

Unravelling the dynamic crosslinking mechanism in polyborosiloxane

Synthesis, cure kinetics, and thermal properties of a novel boron–silicon hybrid polymer

A linear polycarbosilane containing <i>m</i>-carborane units: Synthesis and characterization as precursor for SiC/B<sub>4</sub>C ceramics

Preparation And Characterization Of Polymer-Derived Sibonc Bulk Ceramics By Polymer-Drived Precursor Method

Preparation and properties of silicon-containing arylacetylene resin/benzoxazines blends

Polyborosilazane with Broadly Tunable Boron Content for SiBCN Ceramics

Preparation and properties of silicon-containing benzoxazine with high thermal stability

Preparation and Characterization of High Char Yield Polybenzoxazine/polyarylacetylene Blends for Resin‐transfer Molding

Study of Phase Transition, Structure Modulation, and Thermal Properties of Si/B-modified Bisphenol a Phenolic Resin Ceramicizable Materials