Abstract:As the lightest metal material, magnesium alloy is widely used in the automobile and aviation industries. Due to the crashing of the automobile is a process of complicated and highly nonlinear deformation. The material deformation behavior has changed significantly compared with quasi-static, so the deformation characteristic of magnesium alloy material under the high strain rate has great significance in the automobile industry. In this paper, the tensile deformation behavior of AZ31B magnesium alloy is studied over a large range of the strain rates, from 700 s (1) to 3 x 10(3) s (1) and at different temperatures from 20 to 250 degrees C through a Split-Hopkinson Tensile Bar (SHTB) with heating equipment. Compared with the quasi-static tension, the tensile strength and fracture elongation under high strain rates is larger at room temperature, but when at the high strain rates, fracture elongation reduces with the increasing of the strain rate at room temperature, the adiabatic temperature rising can enhance the material plasticity. The morphology of fracture surfaces over wide range of strain rates and temperatures are observed by Scanning Electron Microscopy (SEM). The fracture appearance analysis indicates that the fracture pattern of AZ31B in the quasi-static tensile tests at room temperature is mainly quasi-cleavage pattern. However, the fracture morphology of AZ31B under high strain rates and high temperatures is mainly composed of the dimple pattern, which indicates ductile fracture pattern. The fracture mode is a transition from quasi-cleavage fracture to ductile fracture with the increasing of temperature, the reason for this phenomenon might be the softening effect under the high strain rates. Crown Copyright (C) 2013 Published by Elsevier Ltd. All rights reserved.

A Constitutive and Fracture Model for AZ31B Magnesium Alloy in the Tensile State

A Modified Johnson–Cook Constitutive Model for Characterizing the Hardening Behavior of Typical Magnesium Alloys under Tension at Different Strain Rates: Experiment and Simulation

Research on Relationship of AZ31B Magnesium Alloy Fracture Strain and Stress Triaxiality

Constitutive Model for AZ31 Magnesium Alloy Based on Isothermal Compression Test

Modification of the Johnson-Cook relationship for AZ31 magnesium alloy at high strain rates

Plastic Flow Characteristics and Physical Conception Constitutive Relation for AZ31 Cast Magnesium Alloy

Dynamic plasticity of AZ31 magnesium alloy: Experimental investigation and constitutive modeling

Research on constitutive equation of AZ31 magnesium alloy under high-velocity forming (HVF) & warm forming condition based on dynamic tension testing

Experimental Study on Tensile Property of AZ31B Magnesium Alloy at Different High Strain Rates and Temperatures

A New Constitutive Model for Thermal Deformation of Magnesium Alloys

Microscopic mechanism exploration and constitutive equation construction for compression characteristics of AZ31-TD magnesium alloy at high strain rate

Deformation failure behavior and fracture model of twin-roll casting AZ31 alloy under multiaxial stress state

Predicted constitutive modeling of hot deformation for AZ31 magnesium alloy

Deformation and Fracture Behaviors of AZ31B Mg Alloy at Elevated Temperature under Uniaxial Compression

A New Phenomenological Model Describing the Compressive Thermal Deformation Flow Stress of Cast-Rolled AZ31B Mg Alloy

AZ31 magnesium alloy electro-plastic flow stress model

A Constitutive Relation of AZ80 Magnesium Alloy During Hot Deformation Based on Arrhenius and Johnson–Cook Model

Modeling of Anisotropic and Asymmetric Behaviour of Magnesium Alloys at Elevated Temperature Coupled with Ductile Damage

Critical Damage Value of AZ31B Magnesium Alloy with Different Temperatures and Strain Rates

Modified Fields–Backofen Model for Constitutive Behavior of As-Cast AZ31B Magnesium Alloy During Hot Deformation

An Accurate Constitutive Model for AZ31B Magnesium Alloy during Superplastic Forming