Abstract:A promising lithium salt of Li difluorophosphate (LiPO2F2) is introduced and added to the basic electrolyte (1 M LiPF6 + dimethyl carbonate (DMC)/ethyl methyl carbonate (EMC)/propylene carbonate (PC)/fluoroethylene carbonate (FEC)) to enhance the electrochemical performance of lithium-ion batteries by changing its concentration at low temperatures. Experiments show that LiPO2F2 can obviously improve the electrolyte’s ionic conductivity, especially. Compared with the baseline (6.29, 5.14, 4.62, 3.77, and 3.15 mS cm–1) under the same conditions, the ionic conductivities of the 2 wt % LiPO2F2-containing electrolyte (2 LiPO2F2) are 7.18, 5.32, 5.23, 4.04, and 3.57 mS cm–1. From this, it is clear that the integrated low-temperature electrochemical performances have been significantly improved. The specific discharge capacities of the 2 wt % LiPO2F2-added electrolyte at 0.2C are 161.4, 157.2, 148.9, and 137.5 mAh g–1 in the range from 25 to −40 °C, which are significantly much higher compared with the basic electrolyte (145.3, 149.4, 135.1, and 107.0 mAh g–1, respectively). Additionally, the addition of LiPO2F2 can promote profoundly the composition and morphology characteristics of the cathode–electrolyte interface (CEI) film; namely, it is a uneven lithium alkyl carboxylate before the addition of LiPO2F2; after that, it becomes an even LiF film, and meanwhile, the new film will facilitate Li+ transport in the electrolyte, further boosting the eletrochemical performance of the cells under low temperatures. At −40 °C under the same current density, the specific discharge capacity is 81.97 mAh g–1 after 50 cycles, while at the same temperature, the specific discharge capacity of the basic electrolyte battery is only 33.37 mAh g–1; that is, the discharge capacity has a staggering 145.6% improvement at −40 °C. In conclusion, the lithium-ion batteries containing LiPO2F2 may meet the application requirements of ultra-low-temperature conditions.

Enhancement of low-temperature performance of LiFePO4 electrode by butyl sultone as electrolyte additive

Enhanced Low Temperature Performance of LiFePO4 Cathode with Electrolyte Modification

Partially Fluorinated Ether As an Electrolyte Additive to Modify Electrode Surface and Suppress Dissolution of Polysulfides in Li-S Batteries

The optimization of the electrolyte for low temperature LiFePO4-graphite battery

Performance improvement of lithium ion battery using PC as a solvent component and BS as an SEI forming additive

Fluoroethylene carbonate as electrolyte additive to improve low temperature performance of LiFePO4 electrode

Enhanced Electrochemical Performance of Lifepo4 Cathode with the Addition of Fluoroethylene Carbonate in Electrolyte

A Covalently Bonded, LiF-rich Solid Electrolyte Interphase for Li Metal Batteries with Superior Low-Temperature Performance

Improving dual electrodes compatibility through tailoring solvation structures enabling high-performance and low-temperature Li||LiFePO 4 batteries

Improving Dual Electrodes Compatibility Through Tailoring Solvation Structures Enabling High-Performance and Low-Temperature Li||LiFePO4 Batteries

Electronic Effect Tuned Ion-Dipole Interactions for Low-Temperature Electrolyte Design of LiFePO4-based Lithium-Ion Batteries

Lithium Fluorosulfonate-Induced Low-Resistance Interphase Boosting Low-Temperature Performance of Commercial Graphite/lifepo4 Pouch Batteries

Enhancing stable LiF-rich interface formation of polyester based electrolyte using fluoroethylene carbonate for quasi-solid state lithium metal batteries

Lithium Difluorophosphate (LiPO 2 F 2 ): An Electrolyte Additive to Help Boost Low-Temperature Behaviors for Lithium-Ion Batteries

Tris(trimethylsilyl) Borate As Electrolyte Additive to Improve Performance of Lithium-Ion Batteries

High performance of low-temperature electrolyte for lithium-ion batteries using mixed additives

Beyond LiF: Tailoring Li2O-Dominated Solid Electrolyte Interphase for Stable Lithium Metal Batteries.

Bicomponent Electrolyte Additive Excelling Fluoroethylene Carbonate for High Performance Si-based Anodes and Lithiated Si-S Batteries

Improvement of Lithium-Ion Battery Performance at Low Temperature by Adopting Ionic Liquid-Decorated PMMA Nanoparticles as Electrolyte Component

A Polyethylene Oxide Based Electrolyte Enabled by the Synergistic Effect of Active LiGaO2 Filler and Ionic Liquid for Superior Lithium Metal Batteries

Ion-dipole Interactions Assist Small Molecular Additives to Regulate Li+ Coordination of Poly(ethylene) Oxide-Based Polymer Electrolyte