Abstract:Alloy composition and heat treatment process have limited possibility to enhance ultra‐high strength aluminum alloys, which restricted their widespread application in lightweight equipment. Consequently, high density dislocations and grain refinement were suggested to strengthen ultra‐high strength aluminum alloys. Here, a novel nanostructured Al‐Zn‐Mg‐Cu‐Zr‐Sc (AZMCZS) alloy with homogeneous microstructure and average grain size around 117.7 nm was prepared through the synergistic processing of hot extrusion and high pressure torsion. Additionally, the microstructures and strengthening mechanisms of the nanostructured Al alloy were analyzed. It was observed that ultimate tensile strength of the nanostructured Al alloy reached nearly 1 GPa, and the elongation of the alloy was 1.9%. The nanostructured Al alloy mainly consists of nanoscale grains (~117.7 nm), high density dislocations (2.4×1015 m‐2), nano‐sized precipitates (the size of 20‐51 nm) and solute atom clusters (~3 nm). The multiple strengthening mechanisms of the nanostructured Al alloy were revealed in terms of grain refinement, dislocations, precipitates, and solute atom clusters. Grain refinement and dislocation strengthening showed superior outcomes and were considered to be the predominant strengthening mechanisms. These findings demonstrate that this nanostructural architecture offers a new way to design super‐strength metals and alloys through effectively controlling the processing regime of severe plastic deformation. This article is protected by copyright. All rights reserved.

An Extraordinary Enhancement of Strain Hardening in Fine-Grained Zirconium

Enhancing Fracture Toughness of Fine-Grained Zr Via Forming Nanoscale Defect Structures

Superior mechanical properties of pure Zr with heterogeneous structure

High Strength and Ductility in Multimodal-Structured Zr

Regain Strain-Hardening in High-Strength Metals by Nanofiller Incorporation at Grain Boundaries.

Tailoring Grain Size Distribution for Optimizing Strength and Ductility of Multi-Modal Zr

Ultrafine-grained Mg-Zn-Y-Zr alloy with remarkable improvement in superplasticity

Enhancement of Yield Strength in Zirconium Metal Through High-Pressure Induced Structural Phase Transition

Extraordinary Toughening by Cryorolling in Zr

The effect of zirconium on the microstructure and mechanical properties of a super-high-strength Al-Zn-Mg-Cu alloy

High Fracture Toughness in a Hierarchical Nanostructured Zirconium

Enhanced Mechanical Properties and Oxidation Resistance of Zirconium Diboride Ceramics via Grain‐Refining and Dislocation Regulation

Effect of zirconium addition on microstructure and mechanical properties of Mg97Y2Zn1 alloy

The Progressive Intensification and Attenuation of Yield Point Phenomenon in a New Polycrystalline Zirconium Alloy: Anisotropic Response of Work Hardening-Softening Transition

Enhancement of Ductility in High Strength Mg-Gd-Y-Zr Alloy

High friction stress and weak grain-refinement strengthening effect induced by severe lattice distortion in ZrTiNb medium entropy alloys

Simultaneously Enhancing the Ductility and Strength of Cryorolled Zr Via Tailoring Dislocation Configurations

Grain Refining Mechanism in Mg–9Gd–4Y Alloys by Zirconium

Enhancing strength and ductility via crystalline-amorphous nanoarchitectures in TiZr-based alloys

Achieving Strength-Ductility Synergy in Zirconium Via Ultra-Dense Twin-Twin Networks

Approaching 1 GPa ultra‐high tensile strength in a nanostructured Al‐Zn‐Mg‐Cu‐Zr‐Sc alloy prepared by severe plastic deformation