Abstract:Emissions of soot particles exert crucial impact on human health and the environment. Previous researches show that a partial replacement of fossil fuels with oxygenated fuels is supposed to reduce soot emission. However, the crucial information of soot size distributions is unclear, although small particles are more dangerous than large particles. In this paper, dimethyl ether (DME) is selected among the oxygenated fuels for the investigation of the doping effect on nascent soot formation. DME was doped in the burner-stabilized rich premixed ethylene/oxygen/argon flames at various mixing ratios. Flame temperature profiles were measured using R-type thermocouples with radiation correction. A scanning mobility particle sizer (SMPS) with a sampling system was used to determine particle size distributions (PSDs) of soot-containing combustion products with immediate dilution. Thermo-gravimetric analysis (TGA) complemented with elemental analysis (EA) was conducted to detect the chemical properties of formed soot particles. Additionally, species profiles of the experimental flame conditions were provided from simulations. The experimental PSDs showed that DME addition could slow down soot evolution process, while lead to a slight increase in incipient soot with size below 4 nm. When DME added, the production of benzene was suppressed due to the reduced concentrations of acetylene and propargyl, and thus soot nucleation. Meanwhile, soot oxidiation was enhanced because the OH radical and the oxidizability of soot particles are both increased. Considering the slight increase of sub-4 nm soot, the effect of oxygenated-PAHs (OPAH) was emphasized. The production of OPAH suppressed soot surface growth, which leading to the relatively lower consumption of sub-4 nm soot in DME added flames. As a result, DME cannot be simply regarded as a clean fuel due to the enhanced formation of sub-4 nm soot particles. When applying oxygenated fuels into practice, it is necessary to pay more attention to the size distributions of the emitted particles, and conduct appropriate post-processing techniques to reduce the emissions of small particles. (C) 2020 The Combustion Institute. Published by Elsevier Inc. All rights reserved.

Primary combustion intermediates in low-pressure premixed laminar 2,5-dimethylfuran/oxygen/argon flames

Primary Combustion Intermediates in Lean and Rich Low-Pressure Premixed Laminar 2-Methylfuran/oxygen/argon Flames

Investigation on the Chemical Effects of Dimethyl Ether and Ethanol Additions on PAH Formation in Laminar Premixed Ethylene Flames

Laminar Burning Characteristics of 2,5-Dimethylfuran and Iso-Octane Blend at Elevated Temperatures and Pressures

Experimental and Kinetic Study of the Effects of CO2 and H2O Addition on PAH Formation in Laminar Premixed C2H4/O2/Ar Flames

Laminar Burning Velocities of 2,5-Dimethylfuran Compared with Ethanol and Gasoline

Experimental Study on Laminar Burning Characteristics of Premixed 2,5-Dimethylfuran/Air Mixtures at Elevated Pressures and Temperatures

Laminar burning characteristics of 2-methylfuran compared with 2,5-dimethylfuran and isooctane

Ultra-High Speed Imaging and Oh-Lif Study of Dmf and Mf Combustion in A Disi Optical Engine

Role of Dimethyl Ether in Incipient Soot Formation in Premixed Ethylene Flames

Combustion characteristics and emissions of 2-methylfuran compared to 2,5-dimethylfuran, gasoline and ethanol in a DISI engine

Laminar Burning Velocity of 2-Methylfuran-air Mixtures at Elevated Pressures and Temperatures: Experimental and Modeling Studies

Experiment Study on Major and Intermediate Species of Ethanol/N-Heptane Premixed Flames

Simulation analysis of soot formation and laminar combustion characteristics of 2,5-dimethylfuran/air at different initial pressures and temperatures

Experimental Study of Dimethoxymethane and Dimethyl Carbonate Addition to Premixed Ethane / Oxygen / Argon Flame

Experimental Study of 2,5-Dimethylfuran and 2-Methylfuran in a Rapid Compression Machine: Comparison of the Ignition Delay Times and Reactivity at Low to Intermediate Temperature

Experimental and numerical study on laminar premixed flame characteristics of 2-ethylfuran

Identification of Tetrahydrofuran Reaction Pathways in Premixed Flames

The Influence of Dimethoxy Methane (dmm)/dimethyl Carbonate (DMC) Addition on a Premixed Ethane/oxygen/argon Flame

Combustion and Emissions of 2,5-Dimethylfuran in a Direct-Injection Spark-Ignition Engine

An Experimental Study of Rich Premixed Gasoline/O<sub>2</sub>/Ar Flame with Tunable Synchrotron Vacuum Ultraviolet Photoionization