Abstract:Accurate modelling of spray combustion process is essential for efficiency improvement and emissions reduction in practical combustion engines. In this work, both unsteady Reynolds-averaged Navier-Stokes (URANS) simulations and large eddy simulations (LES) are performed to investigate the effects of spray and turbulence modelling on the mixing and combustion characteristics of an n-heptane spray flame in a constant volume chamber at realistic conditions. The non-reacting spray process is first simulated with URANS to investigate the effects of entrainment gas-jet model on the penetration characteristics and fuel vapor distributions. It is found that the droplet motion near the nozzle has significant influence on the fuel vapor distribution, while the liquid penetration length is controlled by the evaporation process and insensitive to gas-jet model. For the case considered, both URANS with the gas-jet model and large eddy simulations can properly predict the vapor penetration. For the combustion characteristics, it is found that LES yields better predictions in the global combustion characteristics. The URANS with gas jet model yields a comparable flame length and lift-off-length (LOL) to LES, but results in a larger ignition delay time compared to the experimental data. Another focus of this work is to qualify the convergence characteristics of the dynamic adaptive chemistry (DAC) method in these transient combustion simulations, where DAC is applied to reduce the mechanism locally and on-the-fly to accelerate chemistry calculations. The instantaneous flame structures and global combustion characteristics such as ignition delay time, flame lift-off length and emissions are compared between simulations with and without DAC. For URANS, good agreements are observed both on instantaneous flame structures and global characteristics. For LES, it is shown that the errors incurred by DAC are small for scatter distributions in composition space and global combustion characteristics, while they may significantly affect instantaneous flame structures in physical space. The study reveals that for DAC application in transient simulations, global or statistic information should be used to assess the accuracy, such as manifolds in composition space, conditional quantities and global combustion characteristics. For the cases investigated, a speed-up factor of more than two is achieved by DAC with a 92-species skeletal mechanism with less than 0.2 % and 3.0 % discrepancy in ignition delay and LOL, respectively.

Effects of turbulent intensity and droplet diameter on spray combustion using direct numerical simulation

Direct numerical simulations of rich premixed turbulent n-dodecane/air flames at diesel engine conditions

A direct numerical simulation study of turbulence intensity effects on NOx formation in freely propagating premixed flames

Direct numerical simulation of three-dimensional swirling n-heptane spray flames

Direct Numerical Simulations and Analysis of Three-Dimensional N-Heptane Spray Flames in a Model Swirl Combustor

Direct Numerical Simulation of a Spatially Developing N-Dodecane Jet Flame under Spray A Thermochemical Conditions: Flame Structure and Stabilisation Mechanism

A DNS evaluation of mixing and evaporation models for TPDF modelling of nonpremixed spray flames

INTERACTIONS OF TURBULENCE AND SCALARS IN SHEAR-DRIVEN PREMIXED TURBULENT FLAMES USING DNS

DNS of swirling spray combustion

Direct numerical simulations of swirling spray combustion under different conditions

Spray flames in an air-heptane swirling combustor

Turbulence, Evaporation and Combustion Interactions in N-Heptane Droplets under High Pressure Conditions Using DNS

Numerical Simulation of the Collision Behaviors of Binary Unequal-Sized Droplets at High Weber Number

Numerical Simulation for Combustion of Droplet with Volume of Fluid Formulation

DNS analysis of turbulence modulation by lean premixed prevaporized spray flames in a model combustor

Effects of turbulence-chemistry interactions on auto-ignition and flame structure for n-dodecane spray combustion

Studies on a Swirling Heptane Spray Flame by Large-Eddy Simulation

Effects of Spray and Turbulence Modelling on the Mixing and Combustion Characteristics of an N -Heptane Spray Flame Simulated with Dynamic Adaptive Chemistry

Direct Numerical Simulation and CMC (conditional Moment Closure) Sub-Model Validation of Spray Combustion

Direct numerical simulations of turbulent lean premixed combustion

Direct Numerical Simulation on Supersonic Turbulent Reacting and Non-Reacting Spray Jet in Heated Coflow