Abstract:Emissions of soot particles exert crucial impact on human health and the environment. Previous researches show that a partial replacement of fossil fuels with oxygenated fuels is supposed to reduce soot emission. However, the crucial information of soot size distributions is unclear, although small particles are more dangerous than large particles. In this paper, dimethyl ether (DME) is selected among the oxygenated fuels for the investigation of the doping effect on nascent soot formation. DME was doped in the burner-stabilized rich premixed ethylene/oxygen/argon flames at various mixing ratios. Flame temperature profiles were measured using R-type thermocouples with radiation correction. A scanning mobility particle sizer (SMPS) with a sampling system was used to determine particle size distributions (PSDs) of soot-containing combustion products with immediate dilution. Thermo-gravimetric analysis (TGA) complemented with elemental analysis (EA) was conducted to detect the chemical properties of formed soot particles. Additionally, species profiles of the experimental flame conditions were provided from simulations. The experimental PSDs showed that DME addition could slow down soot evolution process, while lead to a slight increase in incipient soot with size below 4 nm. When DME added, the production of benzene was suppressed due to the reduced concentrations of acetylene and propargyl, and thus soot nucleation. Meanwhile, soot oxidiation was enhanced because the OH radical and the oxidizability of soot particles are both increased. Considering the slight increase of sub-4 nm soot, the effect of oxygenated-PAHs (OPAH) was emphasized. The production of OPAH suppressed soot surface growth, which leading to the relatively lower consumption of sub-4 nm soot in DME added flames. As a result, DME cannot be simply regarded as a clean fuel due to the enhanced formation of sub-4 nm soot particles. When applying oxygenated fuels into practice, it is necessary to pay more attention to the size distributions of the emitted particles, and conduct appropriate post-processing techniques to reduce the emissions of small particles. (C) 2020 The Combustion Institute. Published by Elsevier Inc. All rights reserved.

Particle Size Distributions and OC, EC Emissions from a Diesel Engine with the Application of In-Cylinder Emission Control Strategies

Oxidative Reactivity of Particles Emitted from a Diesel Engine Operating at Light Load with EGR

Gas Emissions and Particulate Matter of Non-Road Diesel Engine Fueled with F-T Diesel with EGR

Soot particles undergo in-cylinder oxidation again via EGR recirculated gas: Analysis of exhaust soot particle characteristics

Numeric investigation of EGR and post-injection diesel emissions

Particulate Matter Chemical Characteristics from a Light-Duty Diesel Engine Fueled with PODE/Diesel Blends

An Analysis on the Microstructure and Oxidation Characteristics of Particles from Diesel Engine in Exhaust Gas Transport Process

Understanding the Role of Exhaust Gas Recirculation in Gasoline/diesel Dual-Fuel Combustion Soot Features

Effects of Fuel Injection Strategies on Emissions Characteristics of a Diesel Engine Equipped with a Particle Oxidation Catalyst (POC)

Role of Dimethyl Ether in Incipient Soot Formation in Premixed Ethylene Flames

Oxidation Behaviors and Nanostructure of Particulate Matter Produced from a Diesel Engine Fueled with N-Pentanol and 2-Ethylhexyl Nitrate Additives

Particulate Size Distribution from Diesel–Dimethyl Ether Dual Fuel Premixed Compression Ignition Combustion Engine

Effect of Injection Timing on Particle Size Distribution from a Diesel Engine

Impact of early injection on physicochemical characteristics of diesel soot particles

Effects of Intake Components and Stratification on the Particle and Gaseous Emissions of a Diesel Engine

Experimental study on morphology, nanostructure and oxidation reactivity of particles in diesel engine with exhaust gas recirculation (EGR) burned with different alternative fuels

Effect of Multiple-Injection Strategies on Diesel Engine Exhaust Particle Size and Nanostructure

Effect Of Dimethoxy-Methane And Exhaust Gas Recirculation On Combustion And Emission Characteristics Of A Direct Injection Diesel Engine

Organic Carbon, Elemental Carbon and Particulate Semivolatile Organic Compound Emissions from a Common-Rail Diesel Engine: Insight into Effect of Fuel Injection Pressure at Different Loads.

Application of CFD, Taguchi Method, and ANOVA Technique to Optimize Combustion and Emissions in a Light Duty Diesel Engine

Experimental investigation on emission characteristics of high reactivity gasoline compression ignition with different EGR and injection pressure strategies