Abstract:Transition metal compounds based on conversion reactions are promising electrode materials for lithium‐ion batteries due to their higher lithium storage capacity compared with currently available commercial battery electrodes. Most of the studies on these materials in the literature focus on transition metal oxides and fluorides, and not much work on transition metal sulphides has been reported, partially due to their relatively poor electrochemical performance. Here, synthesis and characterization of a series of solid solution Fe x Mn 1‐ x S ( x = 0.2, 0.5, 0.8) monosulphide compounds is reported. Interestingly, hexagonal FeS and cubic MnS can form a solid solution of Fe x Mn 1‐ x S ( x < 0.57). It is demonstrated that the lithium storage voltage can be tuned by changing the Fe concentration in the Fe x Mn 1‐ x S matrix; meanwhile, the discharge‐charge coulombic efficiency and cycle stability of Fe x Mn 1‐ x S are greatly enhanced in comparison with that of pure MnS. A half cell using Fe 0.5 Mn 0.5 S as electrode material achieves a high first cycle coulombic efficiency of 78.0% and a high reversible capacity of ca. 477 mAh g −1 after 35 cycles, while for pure MnS the first cycle coulombic efficiency is only 45.9% and the capacity rapidly fades to ≈200 mAh g −1 after 15 cycles. Although the solid solution state of Fe 0.5 Mn 0.5 S cannot be retained during conversion reaction as indicated by X‐ray diffraction (XRD), X‐ray absorption spectroscopy (XAS), and transmission electron microscopy (TEM), the initial discharge “polarization”, which has been considered as one of the major hurdles for conversion reaction, can be significantly reduced by this type of material design. In addition, the size and distribution of the nucleated nanophases might also be altered by the initial solid solution state of Fe 0.5 Mn 0.5 S, contributing to the improved electrochemical performance reported here.

Lithium Deficient Mesoporous Li2−MnSiO4 with Significantly Improved Electrochemical Performance

Insights into the Enhanced Electrochemical Performance of Mn-deficiency Li2Mn(1-x)SiO4/C for Li-ion Batteries: Experimental and Theoretical Study

Enhanced electrochemical performance of Li 1.2 Mn 0.54 Ni 0.13 Co 0.13 O 2 cathode material coated with Li + -conductive Li 2 SiO 3 for lithium ion batteries

Synthesis and electrochemical characterizations of spinel LiMn 1.94 MO 4 (M = Mn 0.06 , Mg 0.06 , Si 0.06 , (Mg 0.03 Si 0.03 )) compounds as cathode materials for lithium-ion batteries

LiSixMn2−xO4 (x≤0.10) Cathode Materials with Improved Electrochemical Properties Prepared Via a Simple Solid-State Method for High-Performance Lithium-Ion Batteries

Enhanced Electrochemical Performance of Li1.2[Mn0.54Co0.13Ni0.13]O2 Enabled by Synergistic Effect of Li1.5Na0.5SiO3 Modification

Improving the Structure Stability and Electrochemical Performance of Li2MnSiO4/C Cathode Materials by Ti-doping and Porous Microstructure

Enhanced Electrochemical Performances of Carbon Coated Mesoporous LiFe[sub 0.2]mn[sub 0.8]po[sub 4]

A Simple and Mass Production Preferred Solid-State Procedure to Prepare the LiSixMgxMn2−2xO4 (0≤x≤0.10) with Enhanced Cycling Stability and Rate Capability

Syntheses And Electrochemical Characterization Of Li-Rich Li2mn1-Xtixo3 Layered Materials Used For Lithium Ion Batteries

Synthesis and Electrochemical Performance Enhancement of Li2MnSiO4 Cathode Material for Lithium‐Ion Batteries via Mn‐Site Ni Doping

Tuning the Electronic Structure of the Metal–Oxygen Group by Silicon Substitution in Lithium-Rich Manganese-Based Oxides for Superior Performance

Remarkably Improved Electrode Performance of Bulk MnS by Forming a Solid Solution with FeS – Understanding the Li Storage Mechanism

Improving rate capacity and cycling performance of lithium-rich high-Mn Li-1.8[Mn0.7Co0.15Ni0.15]O-2.675 cathode materials by Li2SiO3 coating

Enhanced Electrochemical Performance of Ti-doped Li1.2Mn0.54Co0.13Ni0.13O2 for Lithium-Ion Batteries

Electrochemical Performance Of Si-Mn Composites In Li-Ion Battery

High-Performance Carbon-Coated Mesoporous Limn2o4 Cathode Materials Synthesized From A Novel Hydrated Layered-Spinel Lithium Manganate Composite

Understanding the Enhanced Electrochemical Performance of Samarium Substituted Li[Li0.2Mn0.54 − Xsmxco0.13ni0.13]o2 Cathode Material for Lithium Ion Batteries

Solvothermal Synthesis and Electrochemical Performance of Li2mnsio4/C Cathode Materials for Lithium Ion Batteries

Mild Lithium‐Rich Manganese‐Based Cathodes with the Optimal Activation of Li2MnO3 for Stable and High Capacity Lithium‐Ion Batteries

Superior Lithium Storage Capacity of α‐MnS Nanoparticles Embedded in S‐Doped Carbonaceous Mesoporous Frameworks