Abstract:The dead-ended anode (DEA) operation could cause local flooding and local hydrogen starvation in proton exchange membrane fuel cells (PEMFCs), resulting in drastic changes in fuel cell performance. In order to study the detailed local dynamic characteristics of DEA operation, simultaneous measurements of the dynamic variation of local current and local temperature in a PEMFC with DEA have been performed using a local current measurement gasket and micro thermocouples. The results show that the local fuel cell performance distribution gradually becomes uneven during DEA operation and the evolutions of local current and temperature strongly depend on the locations along the flow channel. The highest local current and local temperature are observed near the anode inlet, posing serious threats for the local fuel cell. Furthermore, with anode purging, the current distribution becomes uniform quickly due to the fast mass transfer capacity of hydrogen, but the local temperatures take much longer time to become uniform and stable because of the thermal capacity of fuel cell components. The anode purging also causes local temperature undershoots and the amplitude is over 4°C in this study. Finally, the effects of operating conditions are discussed. The local current and temperature distributions become more uneven as overall operating current increases and operating temperature decreases. The local temperatures are all reduced as anode inlet pressure and air stoichiometry increase due to the enhanced convection cooling effect. It is demonstrated that measuring local current and temperature is effective in investigating local dynamic performance of PEMFCs with DEA.

Analysis of the behavior and degradation in proton exchange membrane fuel cells with a dead-ended anode

Local degradation in proton exchange membrane fuel cells with dead-ended anode

Dynamic evolutions of local current density and water–gas distribution of proton exchange membrane fuel cell with dead-ended anode

Analysis of Dead-End Anode Operation Phenomena Based on a Novel Transient 3D Model of High-Temperature Proton Exchange Membrane Fuel Cell

Experimental Investigation on Operational Stability and Its Influencing Mechanisms for PEMFC with Dead-Ended Anode

Degradation Differences of a Single Proton Exchange Membrane Fuel Cell: Energy Management Strategy and Dynamic Programming

The study on the performance of air-cooled open-cathode PEMFC with dead-ended anode

Proton exchange membrane fuel cell degradation under close to open-circuit conditions

Different Flow Fields, Operation Modes and Designs for Proton Exchange Membrane Fuel Cells with Dead-Ended Anode

Simultaneous measurement of local current and temperature distributions in proton exchange membrane fuel cells with dead-ended anode

Study on the Performance of Proton Exchange Membrane Fuel Cell (PEMFC) with Dead-Ended Anode in Gravity Environment

Degradation Mitigation Effects of Pressure Swing in Proton Exchange Membrane Fuel Cells with Dead-Ended Anode

Numerical simulation and experimental study on the effect of cathode relative humidity on the performance of the PEMFC with dead-ended anode

Operation Characteristics and Carbon Corrosion of Pemfc (proton Exchange Membrane Fuel Cell) with Dead-Ended Anode for High Hydrogen Utilization

Modeling and Analysis of Water Droplet Dynamics in the Dead-Ended Anode Gas Channel for Proton Exchange Membrane Fuel Cells

Proton Exchange Membrane Fuel Cell Reversal: A Review

Advanced Reversal Tolerant Anode in Proton Exchange Membrane Fuel Cells: Study on the Attenuation Mechanism During Fuel Starvation.

Numerical simulation on purge strategy of proton exchange membrane fuel cell with dead-ended anode

A Two-Dimensional Analytical Model of PEMFC with Dead-Ended Anode

Performance Degradation of a Proton Exchange Membrane Fuel Cell with Dead-Ended Cathode and Anode

Understanding the Performance Degradation of Anion-Exchange Membrane Direct Ethanol Fuel Cells