Abstract:Multi-element transition-metal oxides have attracted much attention in the field of energy storage due to their excellent specific capacitance and multiplicity. Herein, Ni 0.5 Mn 0.5 Co 2 O 4 hollow electrode materials were prepared by a novel solvothermal method using polyvinylpyrrolidone (PVP) as a soft template, followed by a subsequent annealing treatment. The materials were characterized by XRD, XPS, SEM, TEM, and BET, and their supercapacitor properties were tested on an electrochemical workstation. The unique hollow structure of Ni 0.5 Mn 0.5 Co 2 O 4 can act as a "charge reservoir" for exposing more active sites and increases its specific surface area to 74.67 m 2 ·g −1 . In the three-electrode system, the electrode material of Ni 0.5 Mn 0.5 Co 2 O 4 exhibits a high specific capacitance (2952.5 F·g −1 at 1 A·g −1 and 540 F·g −1 at 15 A·g −1 ). Meanwhile, the electrode material still possesses 80.8% of the original capacitance after 3000 cycles at a current density of 15 A·g −1 , demonstrating good cycling stability. Finally, the electrode material was assembled with activated carbon to form an asymmetric supercapacitor (ASC). The electrochemical performance of the ASC device tested in the two-electrode system exhibited an energy density of 118.2 Wh·kg −1 when the power density was 1428 W·kg −1 . In addition, the ASC device could light up a small light bulb. The redox reaction kinetics was controlled by both diffusion and capacitive behaviors. With increasing scanning rate, the capacitive contribution gradually dominated the kinetics. The electrode material of Ni 0.5 Mn 0.5 Co 2 O 4 offers possibilities for actual applications in the future.

Spinel LiMn2O4 nanohybrid as high capacitance positive electrode material for supercapacitors

Nanostructured LiMn2O4 Composite As High-Rate Cathode for High Performance Aqueous Li-ion Hybrid Supercapacitors

Rapid Synthesis of Mn-Doped NiFe2O4 Nanosheet Arrays for High-Performance Hybrid Supercapacitors

Synthesis of NiMn-LDH Nanosheet@Ni 3 S 2 Nanorod Hybrid Structures for Supercapacitor Electrode Materials with Ultrahigh Specific Capacitance

Coupling Bimetallic NiMn-MOF Nanosheets on NiCo2O4 Nanowire Arrays with Boosted Electrochemical Performance for Hybrid Supercapacitor

A Novel LiTi2(PO4)3/MnO2 Hybrid Supercapacitor in Lithium Sulfate Aqueous Electrolyte

A Hybrid of MnO2 Nanowires and MWCNTs As Cathode of Excellent Rate Capability for Supercapacitors

MnOx nanosheets anchored on a bio-derived porous carbon framework for high-performance asymmetric supercapacitors

Nanoporous LiMn2O4 spinel prepared at low temperature as cathode material for aqueous supercapacitors

Tunable Synthesis of LixMnO2 Nanowires for Aqueous Li-ion Hybrid Supercapacitor with High Rate Capability and Ultra-Long Cycle Life

High Rate Capability of Mesoporous NiWO4–CoWO4 Nanocomposite As a Positive Material for Hybrid Supercapacitor

Supercapacitive properties of MnNiS @Ti3C2T MXene positive electrode assisted by functionalized ionic liquid

Spinel-structured hollow nanospheres prepared by a soft-template solvothermal method for high-performance supercapacitors

Fabrication of (Ag, Zn, Co) based spinel ferrites as electrode materials for high energy density hybrid supercapacitors

Γ-Fe₂o₃ Nanocrystalline Microspheres with Hybrid Behavior of Battery-Supercapacitor for Superior Lithium Storage.

Electrospun NiO/C nanofibers as electrode materials for hybrid supercapacitors with superior electrochemical performance

Assembling MnCo2O4 nanoparticles embedded into MXene with effectively improved electrochemical performance

Hybrid nanomaterial of α-Co(OH)2 nanosheets and few-layer graphene as an enhanced electrode material for supercapacitors

MnO2 Nanoparticles Anchored on Carbon Nanotubes with Hybrid Supercapacitor-Battery Behavior for Ultrafast Lithium Storage

Synthesis of mesoporous nickel-cobalt-manganese sulfides as electroactive materials for hybrid supercapacitors

Rationally Designed Ni2P/Ni/C As a Positive Electrode for High-Performance Hybrid Supercapacitors