Abstract:The objective of the study is the geomechanical characterization of the rock mass rating RMR system and numerical modeling for mining underground excavation design of the Djebel El Ouahch tunnel, in Constantine (Algeria).The geological and geotechnical character- ization of the rock mass is important for the design of underground mining excavations. In this article, we present the results of the RMR characterization of the rock mass and the numerical modeling by the finite element method (FEM), under the conditions of the Djebel El Ouahch tunnel, Constantine (Algeria).The RMR system is a useful tool for characterization of the rock mass quality and establishing the appropriate support system. For poor rock (Class IV), the excavation should be top heading and bench 1.0 m – 1.5 m advance in top heading. Support should be installed concurrently with excavation, 10 m from face. Rock bolting should be systematic with 4 m – 5 m long, spaced 1.5 m – 1.5 m in the crown and walls with wire mesh, Shotcrete of 100 m -150 mm in the crown and 100 mm in sides. The steel sets should be light to medium ribs spaced 1.5 m only when required. The rock mass consists of generally poor rocks with average stand- up time of 10 hours for 2.5m span with mass cohesion ranges between 100 kPa – 200 kPa and rock mass friction angle ranges from 15° to 35°. The FEM project due to its precision calculates the safety factor and evaluates the principal deformations and displacements of the rocks mass .The originality of this work lies in the use of two different approaches , the RMR system and numerical method (FEM) for analyzing the quality and evaluation of the deformations and displace- ments of rock mass .This method has become a very common practice in underground mining excavation design.This study illustrates that the results obtained by RMR of the argillite rock mass in the case is 28.00 ,ranging from 21.0 to 40.0 classified as Class IV (Poor Rock), while the results of FEM reveal that in accordance with the poor quality of the rocks, large deformations and displacements were observed around the underground mining excavation, which can be at the origin of the ruptures. The value of the safety factor of the order of 0.95 to 1.24 shows the instability of the excavation, and the appearance of very considerable hazard zones in the argillite layer.

Rock Quality Classification and Stability Evaluation of Undersea Deposit Based on M-Irmr

Rock Mass Classification Method Based on Entropy Weight–TOPSIS–Grey Correlation Analysis

Quick and reliable approach for rating underground engineering rock mass based on RMR system

Quality Evaluation of Rock Mass Using RMR14 Based on Multi-Source Data Fusion

Dissecting the Robustness of the Rock Mass Classification Methods Used in Jiaozhou Bay Subsea Tunnel

An Improved Method for Estimating the Strength of Jointed Rock Mass Using Drilling Technology

Discussion on calculation methods of quality index of slope engineering rock mass in Standard for engineering classification of rock mass

A detailed study of the CHN-BQ rock mass classification method and its correlations with RMR and Q system and Hoek-Brown criterion

Rockburst hazard assessment and prevention and control strategies in the Ruihai gold mine

Research on failure mechanism and support technology of fractured rock mass in an undersea gold mine

Quality Classification and Mechanical Parameters Confirmation of Slope Engineering Rock Mass based on RMR and BQ Methods

Comparisons of Evaluation Factors and Application Effects of the New [BQ]GSI System with International Rock Mass Classification Systems

Prediction of Deep Rock Mass Quality and Spatial Distribution Law of Open-pit Gold Mine Based on 3D Geological Modeling

An Approach to Rapidly Evaluating Rock Mass Quality in Underground Engineering Based on Multi-source Heterogeneous Data

Geomechanical characterization of rock mass rating and numerical modeling for underground mining excavation design

Three-dimensional classification and zoning method of surrounding rock and its application based on big data geomechanical information

Application Of Csmr Method In Stope Slope Stability Classification

Quantification of the GSI and D values in the Hoek–Brown criterion using the rock quality designation (RQD) and discontinuity surface condition rating (SCR)

Geo-mechanical classification of the Ighrem Aousser rock mass mining site of the Touissit Mining Company

Stability analysis and control technology of the sump-surrounding rock under a 1200-m-deep goaf: a case study

Numerical Simulation Research and Application of Support Design of Broken Rock Mass in Submarine Gold Mine