On the moving frame of a conformal map from 2-disk into ℝ^n

Yuxiang Li,Yong Luo,Hongyan Tang

DOI: https://doi.org/10.1007/s00526-011-0471-2

2011-01-01

Calculus of Variations and Partial Differential Equations

Abstract:Let f be a conformal map from the 2-disk into ℝ^n . We prove that the image f ( B ) have a normal tangent vector basis ( e 1 , e 2 ) with d(e_1, e_2)_L^2(B)≤ CA_L^2(B) when the total Gauss curvature ∫_B |K_f| dμ_f < 2π .

What problem does this paper attempt to address?

On the Moving Frame of a Conformal Map from 2-Disk into $${\Mathbb{r}^n}$$

Yuxiang Li,Yong Luo,Hongyan Tang

DOI: https://doi.org/10.1007/s00526-011-0471-2

2011-01-01

Calculus of Variations and Partial Differential Equations

Abstract:Let f be a conformal map from the 2-disk into ${\mathbb{R}^n}$ . We prove that the image f(B) have a normal tangent vector basis (e 1, e 2) with ${\|d(e_{1}, e_{2})\|_{L^2(B)} \leq C\|A\|_{L^2(B)}}$ when the total Gauss curvature ${\int_B |K_{f}| d\mu_f < 2\pi}$ .
On Positive Scalar Curvature and Moduli of Curves

Kefeng Liu,Yunhui Wu

DOI: https://doi.org/10.4310/jdg/1549422104

2019-01-01

Journal of Differential Geometry

Abstract:In this article we first show that any finite cover of the moduli space of closed Riemann surfaces of genus $g$ with $g\geq 2$ does not admit any Riemannian metric $ds^2$ of nonnegative scalar curvature such that $ds^2 \succ ds_{T}^2$ where $ds_{T}^2$ is the Teichm\"uller metric. Our second result is the proof that any cover $M$ of the moduli space $\mathbb{M}_{g}$ of a closed Riemann surface $S_{g}$ does not admit any complete Riemannian metric of uniformly positive scalar curvature in the quasi-isometry class of the Teichm\"uller metric, which implies a conjecture of Farb-Weinberger.
Kähler Finsler Metrics and Conformal Deformations

Chen, Bin,Shen, Yibing,Zhao, Lili

DOI: https://doi.org/10.1007/s11856-022-2304-8

2022-01-01

Israel Journal of Mathematics

Abstract:The conformai properties of complex Finsler metrics are studied. We first give a characterization of a compact complex Finsler manifold to be globally conformai Kahler. By considering the total holomorphic curvature and total Ricci curvature in the volume preserved conformal classes, we then study the variational properties of Kahler Finsler metrics. By studying the spectral properties of two average metrics, the stabilities of critical Kähler Finsler metrics are verified. Finally, a Yamabe type problem for mean holomorphic Ricci curvature is considered, and a partial existence result is obtained.
AN OPTIMAL GAP THEOREM FOR SCALAR CURVATURE OF CMC HYPERSURFACES IN A SPHERE

Li Lei,Hongwei Xu,Zhiyuan Xu

DOI: https://doi.org/10.1090/proc/16141

IF: 0.9709

2023-01-01

Proceedings of the American Mathematical Society

Abstract:Let M n M^n be a closed hypersurface with constant mean curvature and constant scalar curvature in the unit sphere S n + 1 \mathbb {S}^{n+1} . Denote by S S and H H the squared length of the second fundamental form and the mean curvature of M M , respectively. For a fixed integer k k , where 1 ≤ k ≤ n − 2 1\leq k\leq n-2 , we prove that there exists a positive constant γ ( n ) \gamma (n) depending only on n n , such that if | H | > γ ( n ) |H|>\gamma (n) and α k ( n , H ) ≤ S ≤ α k + 1 ( n , H ) \alpha _k(n,H)\leq S \leq \alpha _{k+1}(n,H) , then either S = α k ( n , H ) S=\alpha _k(n,H) and M M must be the Clifford torus S n − k ( 1 1 + λ k 2 ) × S k ( λ k 1 + λ k 2 ) \mathbb {S}^{n-k}\big (\frac {1}{\sqrt {1+\lambda _k^2}}\big )\times \mathbb {S}^{k}\big (\frac {\lambda _k}{\sqrt {1+\lambda _k^2}}\big ) , or S = α k + 1 ( n , H ) S=\alpha _{k+1}(n,H) and M M is the Clifford torus S n − k − 1 ( 1 1 + λ k + 1 2 ) × S k + 1 ( λ k + 1 1 + λ k + 1 2 ) \mathbb {S}^{n-k-1}\big (\frac {1}{\sqrt {1+\lambda _{k+1}^2}}\big )\times \mathbb {S}^{k+1}\big (\frac {\lambda _{k+1}}{\sqrt {1+\lambda _{k+1}^2}}\big ) . Here α k ( n , H ) = n + n 3 2 k ( n − k ) H 2 − n ( n − 2 k ) 2 k ( n − k ) n 2 H 4 + 4 k ( n − k ) H 2 \alpha _k(n,H)=n+\frac {n^3}{2k(n-k)}H^2-\frac {n(n-2k)}{2k(n-k)}\sqrt {n^2H^4+4k(n-k)H^2} and λ k = n | H | + n 2 H 2 + 4 k ( n − k ) 2 ( n − k ) \lambda _k=\frac {n|H|+\sqrt {n^2H^2+4k(n-k)}}{2(n-k)} .
Extendability of Conformal Structures on Punctured Surfaces

Jingyi Chen,Yuxiang Li

DOI: https://doi.org/10.1093/imrn/rnx242

2017-01-01

International Mathematics Research Notices

Abstract:For a smooth immersion f from the punctured diskD\{0} intoR(n) extendable continuously at the puncture, if its mean curvature is square integrable and the measure of f (D)boolean AND B-rk = o(r(k)) for a sequence r(k) -> 0, we show that the Riemannian surface (D-r\{0}, g) where g is the induced metric is conformally equivalent to the unit Euclidean punctured disk, for any r is an element of(0, 1). For a W-loc(2,2) Lipschitz immersion f from the punctured disk D-2\{0} into R-n, if parallel to del f parallel to(L infinity) is finite and the second fundamental form of f is in L-2, we show that there exists a homeomorphism phi : D -> D such that f omicron phi is a branched W-2,W-2-conformal immersion from the Euclidean unit disk D into R-n.
Conformal metrics of constant scalar curvature with unbounded volumes

Liuwei Gong,Yanyan Li

2024-06-11

Abstract:For $n\geq 25$, we construct a smooth metric $\tilde{g}$ on the standard $n$-dimensional sphere $\mathbb{S}^n$ such that there exists a sequence of smooth metrics $\{\tilde{g}_k\}_{k\in\mathbb{N}}$ conformal to $\tilde g$ where each $\tilde g_k$ has scalar curvature $R_{\tilde{g}_k}\equiv 1$ and their volumes $\text{Vol}(\mathbb{S}^n,\tilde{g}_k)$ tend to infinity as $k$ approaches infinity.

Analysis of PDEs,Differential Geometry
Rigidity for local holomorphic isometric embeddings from ${\BB}^n$ into ${\BB}^{N_1}\times... \times{\BB}^{N_m}$ up to conformal factors

Yuan Yuan,Yuan Zhang

DOI: https://doi.org/10.48550/arXiv.1001.2941

2011-11-18

Abstract:In this article, we study local holomorphic isometric embeddings from ${\BB}^n$ into ${\BB}^{N_1}\times... \times{\BB}^{N_m}$ with respect to the normalized Bergman metrics up to conformal factors. Assume that each conformal factor is smooth Nash algebraic. Then each component of the map is a multi-valued holomorphic map between complex Euclidean spaces by the algebraic extension theorem derived along the lines of Mok and Mok-Ng. Applying holomorphic continuation and analyzing real analytic subvarieties carefully, we show that each component is either a constant map or a proper holomorphic map between balls. Applying a linearity criterion of Huang, we conclude the total geodesy of non-constant components.

Complex Variables,Differential Geometry
$C^\infty$-convergence of conformal mappings on triangular lattices

Ulrike Bücking

DOI: https://doi.org/10.48550/arXiv.1706.09145

2017-06-28

Complex Variables

Abstract:Two triangle meshes are conformally equivalent if for any pair of incident triangles the absolute values of the corresponding cross-ratios of the four vertices agree. Such a pair can be considered as preimage and image of a discrete conformal map. In this article we study discrete conformal maps which are defined on parts of a triangular lattice $T$ with strictly acute angles. That is, $T$ is an infinite triangulation of the plane with congruent strictly acute triangles. A smooth conformal map $f$ can be approximated on a compact subset by such discrete conformal maps $f^\varepsilon$, defined on a part of $\varepsilon T$ for $\varepsilon>0$ small enough, see [U. B\"ucking, Approximation of conformal mappings using conformally equivalent triangular lattices, in "Advances in Discrete Differential Geometry" (A.I. Bobenko ed.), Springer (2016), 133--149]. We improve this result and show that the convergence is in fact in $C^\infty$. Furthermore, we describe how the cross-ratios of the four vertices for pairs of incident triangles are related to the Schwarzian derivative of $f$.
Conformal Mapping with as Uniform as Possible Conformal Factor

Yonathan Aflalo,Ron Kimmel,Michael Zibulevsky

DOI: https://doi.org/10.1137/110845860

IF: 1.938

2013-01-01

SIAM Journal on Imaging Sciences

Abstract:According to the uniformization theorem, any surface can be conformally mapped into a domain of a constant Gaussian curvature. The conformal factor indicates the local scaling introduced by such a mapping. This process could be used to compute geometric quantities in a simplified flat domain with zero Gaussian curvature. For example, the computation of geodesic distances on a curved surface can be mapped into solving an eikonal equation in a plane weighted by the conformal factor. Solving an eikonal equation on the weighted plane can then be done by regular sampling of the domain using, for example, the celebrated fast marching method (FMM). The connection between the conformal factor on the plane and the surface geometry can be justified analytically. Still, in order to construct consistent numerical solvers that exploit this relation, one needs to prove that the conformal factor is bounded. We provide theoretical bounds of the conformal factor and introduce optimization formulations that control its behavior. It is demonstrated that without such restrictions the numerical results are unboundedly inaccurate. Putting all ingredients in the right order, we introduce a method for computing geodesic distances on a two-dimensional manifold by using the FMM on a weighted flat domain. It is also shown how a metric on a curved domain can be reconstructed by reformulating the nonflat metric restoration problem into a weighted flat domain, again, with bounded weights for consistent results.

mathematics, applied,computer science, software engineering, artificial intelligence,imaging science & photographic technology
Curvature estimates for submanifolds with prescribed Gauss image and mean curvature

Y. L. Xin

DOI: https://doi.org/10.1007/s00526-009-0268-8

2009-01-01

Calculus of Variations and Partial Differential Equations

Abstract:We study that the n -graph defined by a smooth map f:Ω⊂ℝ^n→ℝ^m, m≥ 2, in ℝ^m+n of the prescribed mean curvature and the Gauss image. Under the condition Δ_f=[det(δ_ij+∑_α∂f^α/∂x^i∂f^α/∂x^j)]^1/2 < 2, we derive the interior curvature estimates sup_D_R(x)|B|^2≤C/R^2 when 2 ≤ n ≤ 5 with constant C depending on the given geometric data. If there is no dimension limitation we obtain sup_D_R(x)|B|^2≤ CR^-asup_D_2R(x)(2-Δ_f)^-(3/2+1/s), s=min(m, n) with a < 1. If the image under the Gauss map is contained in a geodesic ball of the radius √(2)/4π in G n , m we also derive corresponding estimates.
On the Scalar Curvature Compactness Conjecture in the Conformal Case

Brian Allen,Wenchuan Tian,Changliang Wang

2024-06-06

Abstract:Is a sequence of Riemannian manifolds with positive scalar curvature, satisfying some conditions to keep the sequence reasonable, compact? What topology should one use for the convergence and what is the regularity of the limit space? In this paper we explore these questions by studying the case of a sequence of Riemannian manifolds which are conformal to the $n$-dimensional round sphere. We are able to show that the sequence of conformal factors are compact in several analytic senses and are able to establish $C^0$ convergence away from a singular set of small volume in a similar fashion as C. Dong. Under a bound on the total scalar curvature we are able to show that the limit conformal factor has weak positive scalar curvature in the sense of weakly solving the conformal positive scalar curvature equation.

Differential Geometry
Mass, Conformal Capacity, and the Volumetric Penrose Inequality

Liam Mazurowski,Xuan Yao

2024-10-13

Abstract:Let $\Omega$ be a smooth, bounded subset of $\mathbb{R}^3$ diffeomorphic to a ball. Consider $M = \mathbb{R}^3 \setminus \Omega$ equipped with an asymptotically flat metric $g = f^4 g_{\text{euc}}$, where $f\to 1$ at infinity. Assume that $g$ has non-negative scalar curvature and that $\Sigma = \partial M$ is a minimal 2-sphere in the $g$ metric. We prove a sharp inequality relating the ADM mass of $M$ with the conformal capacity of $\Omega$. As a corollary, we deduce a sharp lower bound for the ADM mass of $M$ in terms of the Euclidean volume of $\Omega$. We also prove a stability type result for this ``volumetric Penrose inequality.'' The proofs are based on a monotonicity formula holding along the level sets of a 3-harmonic function.

Differential Geometry,Mathematical Physics,Classical Analysis and ODEs
Conformal Circles and Local Diffeomorphisms

Tzu-Mo Kuo

2023-11-12

Abstract:We study unparametrized conformal circles, or called conformal geodesics, study diffeomorphisms mapping conformal circles to conformal circles in pseudo-Riemannian conformal manifolds. We show that such local diffeomorphisms are conformal local diffeomorphisms. Our result extends the result of Yano and Tomonaga. We also present a holographic interpretation for our result on Poincaré-Einstein manifolds. The proofs take suitable variations of conformal circles.

Differential Geometry,Mathematical Physics
Metrics on A Surface with Bounded Total Curvature

Yuxiang Li,Jianxin Sun,Hongyan Tang

DOI: https://doi.org/10.1093/imrn/rnab089

2021-01-01

International Mathematics Research Notices

Abstract:Let g = e(2u)g(euc) be a conformal metric defined on the unit disk of C. We give an estimate of parallel to del u parallel to(L2,infinity(D1/2)) when parallel to K(g)parallel to(L1) is small and mu(B-r(g)(z),g)/pi r(2) < Lambda for any r and z is an element of D-43. Then we use this estimate to study the Gromov-Hausdorff convergence of a conformal metric sequence with bounded parallel to K parallel to(L1) and give some applications.
The approximate conformal mapping onto simply and doubly connected domains

D. F. Abzalilov,E. A. Shirokova

DOI: https://doi.org/10.1080/17476933.2016.1227978

2016-09-13

Complex Variables and Elliptic Equations

Abstract:A new method of approximate conformal mapping of the unit disk onto a simply connected domain and of an annulus onto a doubly connected domain with smooth boundaries is presented. The method is based on integral equations solution which is reduced to a linear system solution and does not require iterations. The mapping function has the form of a Taylor or a Laurent polynomial defined on the unit disk or on the annulus, respectively. The method is easily computable.

mathematics
Conformal metrics with finite total Q-curvature revisited

Mingxiang Li

2024-05-26

Abstract:Given a conformal metric with finite total Q-curvature on $\mathbb{R}^n$ for $n\geq4$, we show that the sign of scalar curvature near infinity control not only the upper bound but also the lower bound of Q-curvature integral which is a new phenomenon. Meanwhile, for general complete non-compact four-manifolds with simple ends, we also obtain similar control of the lower bound of Q-curvature integral.

Differential Geometry,Analysis of PDEs
On the positivity of the Q-curvatures of the conformal metrics

Mingxiang Li,Xingwang Xu

2024-02-26

Abstract:We mainly show that for a conformal metric $g=u^{\frac{4}{n-2m}}|dx|^2$ on $\mathbb{R}^n$ with $n\geq 2m+1$, if the higher order Q-curvature $Q^{(2m)}_g$ is positive and has slow decay near infinity, the lower order Q-curvature $Q^{(2)}_g$ and $Q^{(4)}_g$ are both positive if $m$ is at least two.

Differential Geometry,Analysis of PDEs
On conformal Gauss maps

F. E. Burstall

DOI: https://doi.org/10.1112/blms.12293

IF: 1.036

2019-10-16

Bulletin of the London Mathematical Society

Abstract:<p>We characterise the maps into the space of 2‐spheres in <math>Sn</math> that are the conformal Gauss maps of conformal immersions of a surface into <math>Sn</math>. In particular, we give an invariant formulation and efficient proof of a characterisation, due to Dorfmeister–Wang, of the harmonic maps that are conformal Gauss maps of Willmore surfaces.</p>

mathematics
Numerical Conformal Mapping of Multiply Connected Domains to Regions with Circular Boundaries

Wei Luo,Junfei Dai,Xianfeng Gu,Shing-Tung Yau

DOI: https://doi.org/10.1016/j.cam.2009.11.038

IF: 2.872

2009-01-01

Journal of Computational and Applied Mathematics

Abstract:We propose a method to map a multiply connected bounded planar region conformally to a bounded region with circular boundaries. The norm of the derivative of such a conformal map satisfies the Laplace equation with a nonlinear Neumann type boundary condition. We analyze the singular behavior at corners of the boundary and separate the major singular part. The remaining smooth part solves a variational problem which is easy to discretize. We use a finite element method and a gradient descent method to find an approximate solution. The conformal map is then constructed from this norm function. We tested our algorithm on a polygonal region and a curvilinear smooth region.
Minimal surfaces in a unit sphere pinched by intrinsic curvature and normal curvature

Dan Yang

DOI: https://doi.org/10.48550/arXiv.1712.08486

2017-12-22

Abstract:We establish a nice orthonormal frame field on a closed surface minimally immersed in a unit sphere $S^{n}$, under which the shape operators take very simple forms. Using this frame field, we obtain an interesting property $K+K^{N}=1$ for the Gauss curvature $K$ and the normal curvature $K^{N}$ if the Gauss curvature is positive. Moreover, using this property we obtain the pinching on the intrinsic curvature and normal curvature, the pinching on the normal curvature, respectively.

Differential Geometry

On the moving frame of a conformal map from 2-disk into ℝ^n

On the Moving Frame of a Conformal Map from 2-Disk into $${\Mathbb{r}^n}$$

On Positive Scalar Curvature and Moduli of Curves

Kähler Finsler Metrics and Conformal Deformations

AN OPTIMAL GAP THEOREM FOR SCALAR CURVATURE OF CMC HYPERSURFACES IN A SPHERE

Extendability of Conformal Structures on Punctured Surfaces

Conformal metrics of constant scalar curvature with unbounded volumes

Rigidity for local holomorphic isometric embeddings from ${\BB}^n$ into ${\BB}^{N_1}\times... \times{\BB}^{N_m}$ up to conformal factors

$C^\infty$-convergence of conformal mappings on triangular lattices

Conformal Mapping with as Uniform as Possible Conformal Factor

Curvature estimates for submanifolds with prescribed Gauss image and mean curvature

On the Scalar Curvature Compactness Conjecture in the Conformal Case

Mass, Conformal Capacity, and the Volumetric Penrose Inequality

Conformal Circles and Local Diffeomorphisms

Metrics on A Surface with Bounded Total Curvature

The approximate conformal mapping onto simply and doubly connected domains

Conformal metrics with finite total Q-curvature revisited

On the positivity of the Q-curvatures of the conformal metrics

On conformal Gauss maps

Numerical Conformal Mapping of Multiply Connected Domains to Regions with Circular Boundaries

Minimal surfaces in a unit sphere pinched by intrinsic curvature and normal curvature