Abstract:Traditional methods for achieving hierarchical surface structures include highly specified, deterministic approaches to create features to meet design intention. In this study microstructural alteration was undertaken using laser apparatus and secondary texturing was achieved via succeeding electrochemical processes. Electrochemical jet machining (EJM) was performed on mild steel subjected to laser pre-treatment using power densities of 4167 and 5556W/cm2 with pulse durations from 0.3–1.5s. Results show that in combination, laser pre-treatment and EJM can alter the exposed surface textures and chemistries. Here, machined surface roughness (Sa) was shown to increase from approximately 0.45μm for untreated surfaces to approximately 18μm for surfaces subjected to extreme laser pre-treatments. After pre-treatments materials were characterised to appraise microstructural changes, shown to be martensite formation, reinforced by complementary simulation data, and significant increases in observable hardness from approximately 261HV for the as-received material to over 700HV after pre-treatment. The greater hardness was retained after EJM. Exposed martensitic lath structures at machined surfaces are shown to be partially responsible for surface roughness increases. The surfaces were explored with energy dispersive X-ray spectroscopy (EDS) and Raman spectroscopy demonstrating changes in apparent surface chemistry. This analysis revealed increasing oxide formation at the surface of the pre-treated EJM surface, a further contributory factor to surface roughness increases. This new process chain will be of interest to manufacturers seeking to control surface morphology for applications including micro-injection mould/die manufacture. While demonstrated here for steel similar mechanisms are exploitable in other material systems. A new technique has been demonstrated, resulting from the models and processes presented to couple laser and electrolyte jet processing for complex surface preparation.

Sequential colorization of steel surface by ps laser texturing

Sequential Color Change On Copper Surfaces Via Micro/Nano Structure Modification Induced By A Picosecond Laser

Laser Writing of Multilayer Structural Colors for Full‐Color Marking on Steel

Enhancement of laser-induced surface coloring through laser double-scan method

Single-Step femtosecond laser structuring of multifunctional colorful metal surface and its origin

Angle-Independent Colorization of Copper Surfaces by Simultaneous Generation of Picosecond-Laser-Induced Nanostructures and Redeposited Nanoparticles

Stainless steel colouring using burst and biburst mode ultrafast laser irradiation

Color visual art creation on metals via multifunctional laser paintbrush

Generation of Wide Color Gamut in a Collisional and Magnetized Plasma by Laser‐Induced Coloration on Composite Structure Surfaces

Laser writing of bright colours on near-percolation plasmonic reflector arrays

Surface modification of mild steel using a combination of laser and electrochemical processes

High-speed laser writing of structural colors for full-color inkless printing

Color Tuning Based on Micro-Nano Structure and Metal Nanolayer

Fabricating colorful bulk metallic glass surfaces by femtosecond laser processing

Nanosecond laser coloration of Ti-based metallic glass under various laser parameters and irradiation atmospheres

Structural colors with embedded anti-counterfeit features fabricated by laser-based methods

Improvement of Laser Shock Peening Depth Through Regulation of Surface Optical Absorption

Fabrication of gradient periodic surface structures on stainless steel using direct laser interference patterning

Structural Color Generation on Transparent and Flexible Substrates by Nanosecond Laser Induced Periodic Surface Structures

Method, processing system and collecting system for processing various structure colors through femtosecond laser

Dynamic Structural Color Display Based on Femtosecond Laser Variable Polarization Processing