Abstract:This study aims to investigate the tensile failure behaviours and corresponding fracture mechanisms of basalt fiber reinforced lightweight-aggregate concrete (BFLAC) at various temperatures via a comprehensive cryogenic tests and mesoscale simulations, with a special focus on the quantitative effects of cryogenic temperature and fiber volume fraction. Firstly, Macro- and micro-scale split-tensile tests of BFLAC with fiber volume fractions of 0.0-0.3 % at 20 similar to-90 degree celsius were conducted. Secondly, a two-steps sequentially thermo-mechanical coupled mesoscale analysis approach with explicit modelling of fibers and pore ice was developed to simulate the corresponding direct-tensile failures of BFLAC with more fiber volume fractions. The results show that as the temperature falls from 20 degree celsius to -90 degree celsius, the dominant action mechanism of basalt fibers changes from Mode-1 (pullout of fibers) to Mode-2 (rupture of fibers) due to the ice formation and the interactions between mesocomponents. Tensile strengths of BFLAC present a significant low-temperature enhancing effect, with a maximum increase of 90 % for direct-tensile strength while 104 % for split-tensile strength. Besides, as the temperature drops, although a larger proportion of fibers are in a low bridging stress state and a smaller proportion reach yield stress for rupture, the average fiber stress increases and the utilization degree of fibers with more stresses transferred improves, which results in that the fiber reinforcement effect is strengthened. Finally, based on experimental and numerical results, the quantitative relationships between split-tensile and directtensile strengths at different cryogenic temperatures were given. The present research results can better understand the cryogenic mechanical properties of BFLAC, which have important reference value for its extensive promotions and applications in engineering structures exposed to extreme low-temperature environments.

Cryogenic Mechanical Properties of Woven Glass/epoxy Composites Modified with Multi-Walled Carbon Nanotube and N-Butyl Glycidyl Ether under Tensile Static and Cyclic Loadings

Enhancement in Mode II Interlaminar Fracture Toughness at Cryogenic Temperature of Glass Fiber/epoxy Composites Through Matrix Modification by Carbon Nanotubes and N-Butyl Glycidyl Ether

Damage evolution characterization of glass fabric composites at cryogenic temperatures via in-situ tensile X-ray computed tomography tests

Mechanical Response and Failure of 3D MWK Carbon/epoxy Composites at Cryogenic Temperature

Testing: Methods for Strength Characterization of Woven Fabric Composites at Cryogenic Temperatures

Cryogenic Compression Properties and Failure Mechanism of Lightweight 3D MWK Carbon Fabric Reinforced Epoxy Composites

Cryogenic Mechanical Behaviors of Carbon Nanotube Reinforced Composites Based on Modified Epoxy by Poly(Ethersulfone)

Cryogenic Mechanical Behaviors of MMT/epoxy Nanocomposites

A Comparative Study on the Tensile Properties and Failure Mechanism of 3D MWK Composites at Room and Liquid Nitrogen Temperature

Cryogenic mechanical properties of unidirectional carbon fiber reinforced epoxy composite

Property enhancement of polymer-based composites at cryogenic environment by using tailored carbon nanotubes

Mechanism of Matrix Influencing the Cryogenic Mechanical Property of Carbon Fibre Reinforced Epoxy Resin Composite

Tensile Deformation Mechanisms of an In-Situ Ti-based Metallic Glass Matrix Composite at Cryogenic Temperature

Mechanism Analysis on Tensile Fracture Properties of Heterogeneous BFLAC at Cryogenic Temperature: Experimental Investigation and Mesoscale Simulation

Cryogenic properties of PEG/nano-SiO2 co-toughened winding resin and its carbon fiber-reinforced composites

Mechanical analysis of multilayer composite materials with duroplastic matrix after exposure to low temperatures

Simultaneous Enhancements in the Mechanical, Thermal, and Electrical Performances of Glass‐fiber‐reinforced Cyanate Ester/epoxy Composites with Plasma‐functionalized Carbon Nanotubes at Different Temperatures

Cryogenic Mechanical Property and Deformation Behavior of a Ti-based Metallic Glass Matrix Composite by Three Point Bending Tests

Reinforcement of Epoxy Resins with Multi-Walled Carbon Nanotubes for Enhancing Cryogenic Mechanical Properties

Mechanical performance of CNT-filled glass fiber/epoxy composite in in-situ elevated temperature environments emphasizing the role of CNT content

Cryogenic Mechanical Properties and Failure Mechanism of Epoxy Nanocomposites Modified by Multiwalled Carbon Nanotubes with Tunable Oxygen‐containing Groups on Surface