Abstract:TiO2 sols synthesized with a facile solution-based method were used as a buffer layer between the active layer and the cathode Al in conventional structure polymer solar cells (PSCs). Using transmission electron microscopy (TEM), selected area electron diffraction (SAED), X-ray diffraction (XRD) and atomic force microscopy (AFM), the morphological and crystallographic properties of synthesized TiO2 nanoparticles (TiO2 NPs) as well as the buffer layer were studied in detail. It was observed that by increasing H2O in the process of peptization both the crystallinity and particle size of TiO2 NPs were enhanced, while the particles in sol showed a narrower size distribution conformed by dynamic light scattering. Inserting TiO2 NPs as a buffer layer in conventional structure PSCs, both the power conversion efficiency (PCE) and stability were improved dramatically. PSCs based on the structure of ITO/PEDOT:PSS/P3HT:PCBM/TiO2 NPs/Al showed the short-circuit current (Jsc) of 12.83 mA/cm2 and the PCE of 4.24%, which were improved by 31% and 37%, respectively comparing with the reference devices without a TiO2 buffer layer. The stability measurement showed that PSC devices with a TiO2 NPs buffer layer could retain 80% of the original PCEs after exposed in air for 200 h, much better than the devices without such a buffer layer. The effect can be attributed to the protection by the buffer layer against oxygen and H2O diffusion into the active layers. The observations indicate that TiO2 NPs synthesized by facile solution-based method have great potential applications in PSCs, especially for large-area printed PSCs.

High-performance Polymer Solar Cells with Solution-Processed and Environmentally Friendly CuOx Anode Buffer Layer.

Solution-Processed Copper Iodide As an Inexpensive and Effective Anode Buffer Layer for Polymer Solar Cells

Efficient Polymer Solar Cells with A Solution-Processed and Thermal Annealing-Free Ruo2 Anode Buffer Layer

Dual-interface modification effect of Carbon Quantum Dots on the performance of Polymer Solar Cells

Ultrathin Anode Buffer Layer for Enhancing Performance of Polymer Solar Cells

Simple solution-processed CuO X as anode buffer layer for efficient organic solar cells

Solution-processed vanadium oxide as a hole collection layer on an ITO electrode for high-performance polymer solar cells

Efficient and stable polymer solar cells with solution-processed molybdenum oxide interfacial layer

Aqueous Solution‐processed NiOx Anode Buffer Layers Applicable for Polymer Solar Cells

Enhancing the Performance of Polymer Solar Cells Using Solution-Processed Copper Doped Nickel Oxide Nanoparticles As Hole Transport Layer.

Efficient Bulk Heterojunction Polymer Solar Cells Using Pedot/Pss Doped with Solution-Processed Moo3 As Anode Buffer Layer

Enhanced Efficiency and Stability of Polymer Solar Cells with TiO2 Nanoparticles Buffer Layer

Sonochemistry-synthesized CuO nanoparticles as an anode interfacial material for efficient and stable polymer solar cells

Solution-Processed And Low-Temperature Annealed Crox As Anode Buffer Layer For Efficient Polymer Solar Cells

Enhanced Electron Extraction Capability of Polymer Solar Cells Via Modifying the Cathode Buffer Layer with Inorganic Quantum Dots

Solution-processed tungsten oxide as an effective anode buffer layer for high-performance polymer solar cells

Ultrathin Polyaniline-Based Buffer Layer for Highly Efficient Polymer Solar Cells with Wide Applicability.

Enhanced Performance and Stability in Pbdttt-C-T: Pc70 Bm Polymer Solar Cells by Optimizing Thickness of Niox Buffer Layers

Enhancing the Short-Circuit Current and Efficiency of Organic Solar Cells Using MoO3 and CuPc As Buffer Layers

Organic Solar Cells With Remarkable Enhanced Efficiency By Using A Cui Buffer To Control The Molecular Orientation And Modify The Anode

High Performance Polymer Solar Cells with As-Prepared Zirconium Acetylacetonate Film As Cathode Buffer Layer.