Abstract:The eddy-current method has been employed to realize the real-time measurement of thickness distribution and polishing endpoint detection of metal films during the metal chemical mechanical polishing (CMP) process. However, accuracy and sensitivity in thickness measurement can be significantly impacted by a variation in lift-off distance (about 3.5 mm), attributable to the progressive wear of the polishing pad. This paper proposes a novel triple-coil sensor system, integrated with an alternating-current bridge and designed for high-precision metal film thickness measurement. Subsequently, the measurement performance of the bridge output voltage was scrutinized using a theoretical model and a trans-dimensional finite element analysis model of electromagnetic fields and circuit coupling. The correlations between the amplitude, phase, and the ratio of the real part to the imaginary part of the output voltage, in context with film thickness, were determined at assorted excitation frequencies and lift-off distances. Both theoretical equations and simulation results affirmed that the phase and ratio were more resistant to lift-off distance variations than the amplitude, and a linear relationship was identified between the ratio and film thickness. Furthermore, the thickness measurement performance of the amplitude and phase, when the triple-coil was imbalanced, was dissected via numerical simulation. A profound understanding of the proposed system was provided and beneficial for the practical applications in real-time thickness measurements of metal films during the metal CMP process.

A non-destructive evaluation strategy for thick coating evaluation on hemispherical steel shells of different sizes with a wide-range ECT sensor

A Thickness Nondestructive Evaluation Strategy for Coating Located in Truncated Conical Steel Shells of Various Sizes Based on Eddy Current Testing Technology

A Thickness Measuring Strategy for Coating in Hemispherical Steel Shells with EC-laser Combined Sensors

Research on Strategies to Improve Measurement of Coating Thickness in Hemispherical Steel Shells for an Inclined Eddy Current Sensor

A Nde Strategy Based On A Database For Evaluation Of The Anti-Corrosive Coating On Curved Steel Bases Of Various Sizes Using Ect Signals

On-line thickness monitoring technique based on eddy-current and virtual system

Improvement of Measuring Accuracy for Coating Covered on Conical Steel Shells by Correction of Eddy Current Signals

Research on Applicability of Eddy Current Testing Technique to Thickness Measurement of Coating in a Steel Pipe

Investigation of pipe thickness monitoring using the shear wave EMAT technology with high lift-off distance

Multiphysics Structured Eddy Current and Thermography Defects Diagnostics System in Moving Mode.

Geometric Optimization of a Flexible Arrayed Eddy Current Sensor for Non-Destructive Testing

Ultrasonic Guided Wave-Based Circumferential Scanning of Plates Using a Synthetic Aperture Focusing Technique

Thickness and Permeability Estimation of Metallic Plates by Triple-Frequency Eddy-Current Testing With Probe Lift-Off

Thickness Assessment of Thermal Barrier Coatings of Aeroengine Blades Via Dual-Frequency Eddy Current Evaluation

Non-destructive Evaluation of Uneven Coating Thickness Based on Active Long Pulse Thermography

Absorbing Coating Thickness Measurement Based on Lift-Off Effect of Eddy Current Testing

Metal Thickness Measurement System Based on a Double-Coil Eddy-Current Method with Characteristic Ratio Detection.

Unconventional coil shape design of eddy current sensors and the effect of shape parameters on the micro/nano-scale metal film thickness measurement performance

Computational Investigation of a Novel Metal Thickness Measurement System with Coaxial Triple-Coil Sensor for Chemical Mechanical Polishing

Thickness Measurement Based on Eddy Current Sensor with Coaxial Double Coil for Chemical Mechanical Polishing

High precision thickness evaluation of thermal barrier coating with high frequency eddy current testing method