WEAR MECHANISMS AND PERFORMANCE OF COATED INSERTS DURING FACE MILLING OFTC11ANDTC17ALLOYS

Qiulin Niu,Qinglong An,Ming Chen,Weiwei Ming
DOI: https://doi.org/10.1080/10910344.2013.806184
2013-01-01
Machining Science and Technology
Abstract:Advanced coatings on cutting tools play an important role in improving the machinability of difficult-to-cut materials (e.g., titanium alloys, nickel-based superalloys, and ultra high strength steels). In this article, two kinds of coated carbide inserts, which were obtained by the methods of physical vapor deposition (PVD) and chemical vapor deposition (CVD), were used for face milling of titanium alloys TC11 and TC17. The wear mechanism and the performance of the coated inserts have been investigated when machining titanium alloys in the present work. The coated inserts were observed by scanning electron microscope (SEM) and energy dispersion spectrometer (EDS). Both tool failure modes and wear mechanisms were analyzed. The results indicate that PVD-(TiN+TiAlN)-coated carbide insert (Tool-A) is suitable for machining TC17 alloy under dry condition, and CVD-(TiN+Al2O3+TiCN)-coated insert (Tool-B) is useful for milling TC11 alloy. When face milling TC17 alloy without coolant, the crater with chipping and the breakage with flaking are the dominant modes of failure of PVD- and CVD-coated inserts, respectively. TC17 alloy is a more difficult-to-machine material than TC11 alloy.
What problem does this paper attempt to address?