Abstract:In order to investigate the tensile deformation behavior of ultra-high-strength-steel BR1500HS, a series of isothermal tensile experiments were carried out in a temperature range of 1023 similar to 1123 K and a strain rate range of 0.01 similar to 10 s(-1) on a Gleeble-3500 thermo-mechanical simulator. The results indicate that the flow stress initially increases to a peak value and then decreases gradually to a steady state. Based on the analysis of the effect of strain, temperature and strain rate on flow stress, dynamic recrystallization (DRX) type softening characteristics of the stress-strain curve with single peak were identified. The flow stress level decreases with increasing temperature and decreasing strain rate. By regression analysis for Arrhenius type equation, the hot deformation activation energy Q and material constants (n, alpha, beta and A) were calculated. Further, the Arrhenius-type constitutive equation of flow stress was developed by considering the effect of strain on the variable coefficients (including activation energy Q, material constants n, alpha, and A). The validity of the developed constitutive equation incorporating the influence of strain was evaluated through comparing the experimental and predicted data. Furthermore, the predictability of the developed model was also evaluated using two standard statistical parameters, correlation coefficient (R) and average absolute relative error (AARE). And R-value and AARE-value for the model are 0.997 and 4.06% respectively, which indicates that the developed model can precisely estimate the flow behavior for BR1500HS alloy throughout the entire temperature and strain rate range.

Deformation characteristic and prediction of flow stress for as-cast 21Cr economical duplex stainless steel under hot compression

Modeling the constitutive relationship of Cr 20Ni 25Mo 4Cu superaustenitic stainless steel during elevated temperature

A Novel Unified Model Predicting Flow Stress and Grain Size Evolutions During Hot Working of Non-Uniform As-Cast 42crmo Billets

PLASTIC FLOW CHARACTERISTICS AND CONSTITUTIVE RELATION FOR ULTRA HIGH STRENGTH STEEL AF1410

A Study on the Flow Behavior of 42crmo Steel under Hot Compression by Thermal Physical Simulations

The Flow Behavior Modeling of As-Extruded 3cr20ni10w2 Austenitic Heat-Resistant Alloy at Elevated Temperatures Considering the Effect of Strain

Effect of temperature and strain rate on the compressive deformation behavior of 42CrMo steel

Characteristic flow behaviour prediction and microstructure analysis of a commercial Si–Cr micro-alloyed spring steel under isothermal compression

Modeling of Flow Stress of 42crmo Steel under Hot Compression

Constitutive Modeling of Hot Deformation Behavior of X20cr13 Martensitic Stainless Steel with Strain Effect

Constitutive Modeling for Tensile Behaviors of Ultra-High-Strength-Steel Br1500hs at Different Temperatures and Strain Rates

Prediction of 42crmo Steel Flow Stress at High Temperature and Strain Rate

Study on Hot Deformation of As-Cast Duplex Stainless Steel 2205

Prediction of FV520B Steel Flow Stresses at High Temperature and Strain Rates

Microstructure Evolution and Flow Stress Model of a 20mn5 Hollow Steel Ingot During Hot Compression

Modelling of Hot Compressive Deformation Behaviour of 55 Steel Considering Strain

Hot Deformation Behavior and a Two-Stage Constitutive Model of 20mn5 Solid Steel Ingot During Hot Compression.

Flow Stress Characteristics and Constitutive Modeling of Typical Ultrahigh‐Strength Steel under High Temperature and Large Strain

Modeling for Predicting Flow Stress of Al-14cu-7ce Alloy at Elevated Temperature

Constitutive Modeling for Elevated Temperature Flow Behavior of 30cr2ni4mov Ultra-super-crical Rotor Steel

A Comparative Study on Modified and Optimized Zerilli-Armstrong and Arrhenius-Type Constitutive Models to Predict the Hot Deformation Behavior in 30si2mncrmove Steel