Abstract:Stereolithography based 3D printing of microfluidics for prototyping has gained a lot of attention due to several advantages such as fast production, cost-effectiveness, and versatility over traditional photolithography-based microfabrication techniques. However, existing consumer focused SLA 3D printers struggle to fabricate functional microfluidic devices due to several challenges associated with micron-scale 3D printing. Here, we explore the origins and mechanism of the associated failure modes followed by presenting guidelines to overcome these challenges. The prescribed method works completely with existing consumer class inexpensive SLA printers without any modifications to reliably print PDMS cast microfluidic channels with channel sizes as low as ~75 μm and embedded channels with channel sizes as low ~200 μm. We developed a custom multi-resin formulation by incorporating Polyethylene glycol diacrylate (PEGDA) and Ethylene glycol polyether acrylate (EGPEA) as the monomer units to achieve micron sized printed features with tunable mechanical and optical properties. By incorporating multiple resins with different mechanical properties, we were able to achieve spatial control over the stiffness of the cured resin enabling us to incorporate both flexible and rigid components within a single 3D printed microfluidic chip. We demonstrate the utility of this technique by 3D printing an integrated pressure-actuated pneumatic valve (with flexible cured resin) in an otherwise rigid and clear microfluidic device that can be fabricated in a one-step process from a single CAD file. We also demonstrate the utility of this technique by integrating a fully functional finger-actuated microfluidic pump. The versatility and accessibility of the demonstrated fabrication method have the potential to reduce our reliance on expensive and time-consuming photolithographic techniques for microfluidic chip fabrication and thus drastically lowering our barrier to entry in microfluidics research.

Investigation of the maskless lithography technique for the rapid and cost-effective prototyping of microfluidic devices in laboratories

Rapid Prototyping of Soft Lithography Masters for Microfluidic Devices Using Dry Film Photoresist in a Non-Cleanroom Setting

A low-cost fabrication method of nanostructures by ultraviolet proximity exposing lithography

Electrohydrodynamic Direct-Writing Lithography: an Alternative Maskless Technique for Microstructure Fabrication

Rapid Prototyping of Organ-on-a-Chip Devices Using Maskless Photolithography

Rapid Prototyping of Microfluidic Chips for Use in Droplet Formation and In-Vitro Compartmentalisation

Rapid Customization of 3d Integrated Microfluidic Chips Via Modular Structure-Based Design

Homebrew Photolithography for the Rapid and Low-Cost, "Do It Yourself" Prototyping of Microfluidic Devices

Fabricating Technologies of Nanofluidic Chips and Their Applications

Direct Optical Patterning of Poly(Dimethylsiloxane) Microstructures for Microfluidic Chips

A Low-Cost Method of Fabricating Hybrid Micro-Nano Fluidic Chip by Double-Layer PDMS Mold and UV–thermal Nanoimprinting

Multi-Resin Masked Stereolithography (MSLA) 3D Printing for Rapid and Inexpensive Prototyping of Microfluidic Chips with Integrated Functional Components

Prototyping of Masks, Masters, and Stamps/molds for Soft Lithography Using an Office Printer and Photographic Reduction

Rapid method for design and fabrication of passive micromixers in microfluidic devices using a direct-printing process.

Rapid Fabrication of High-Resolution Multi-Scale Microfluidic Devices Based on the Scanning of Patterned Femtosecond Laser.

PDMS-based microfluidic device with multi-height structures fabricated by single-step photolithography using printed circuit board as masters.

Rapid Prototyping of Single-Layer Microfluidic PDMS Devices with Abrupt Depth Variations under Non-Clean-room Conditions by Using Laser Ablation and UV-curable Polymer

On-Chip Microfabrication of Thermally Controllable Pnipaam Microvalves by Using Optical Maskless Stereolithography

Inexpensive Benchtop Soft Photolithography Technique for Microfluidics and Other Applications

Prototyping chips in minutes: Direct Laser Plotting (DLP) of functional microfluidic structures

Parallel near-field photolithography with metal-coated elastomeric masks.