Study on Effects of Interfacial Anisotropy and Elastic Interaction on Morphology Evolution and Growth Kinetics of a Single Precipitate in Mg‐Al Alloy by Phase Field Modelling

Guomin Han,Zhiqiang Han,Alan A. Luo,Anil K. Sachdev,Baicheng Liu

DOI: https://doi.org/10.1002/9781118658468.ch12

2013-01-01

Abstract:This chapter contains sections titled: Introduction Phase Field Model Results and Discussion Conclusion Acknowledgement

What problem does this paper attempt to address?

Phase Field Simulation on Morphology of Continuous Precipitate Mg17al12 in Mg-Al Alloy

Han Guomin,Han Zhiqiang,Alan A. Luo,Anil K. Sachdev,Liu Baicheng

DOI: https://doi.org/10.3724/sp.j.1037.2012.00531

IF: 1.797

2013-01-01

ACTA METALLURGICA SINICA

Abstract:The morphology evolution of the continuous precipitate Mg17Al12 in aging process was studied using KKS phase field model. In the model, the chemical free energy and chemical potential for the precipitate phase and matrix were obtained by using Thermo-Calc software and database. The effects of interfacial energy anisotropy were taken into account by introducing interface anisotropy function, and the effects of micro elastic strain energy were introduced based on the theory of micro elastic strain energy formulated by Khachaturya. It is demonstrated that the precipitate phase has a lath shape when only the interfacial energy anisotropy was considered regardless of the micro elastic strain energy. The precipitate phase grows into a diamond shape when only the micro elastic strain energy was taken into account regardless of the interfacial energy anisotropy. When both the effects of the interfacial energy anisotropy and the micro elastic strain energy were considered in the simulation, the precipitate phase has a lath shape with lozenge ends, which is in agreement with experimental observations. The interfacial energy anisotropy affects the overall morphology of the precipitate, and combining the interfacial energy anisotropy and the micro elastic strain energy results in the lath shape with lozenge ends.
Phase-field Model Simulations of Alloy Directional Solidification and Seaweed-Like Microstructure Evolution Based on Adaptive Finite Element Method

Chang-Sheng Zhu,Sheng Xu,Li Feng,Dan Han,Kai-Ming Wang

DOI: https://doi.org/10.1016/j.commatsci.2018.12.058

IF: 3.572

2019-01-01

Computational Materials Science

Abstract:Based on the multi-grain growth phase field model of multi-element single-phase system, the adaptive finite element method using non-uniform grid is studied to solve the problem. The Al-4wt.%Cu binary alloy is taken as an example to study the planar solidification process and morphological evolution during the initial transition phase of solidification were studied under the condition of large computational domain and thin interfacial layer thickness. The effects of disturbance and anisotropy intensity on the microstructure of the solidification, the influence of physical parameters such as temperature gradient and cooling rate on the interface morphology growth and evolution were quantitatively analyzed. The growth mechanism of the interface morphology during directional solidification and the transformation mechanism of seaweed tissue were discussed. The results show that under the condition of low temperature gradient and high cooling rate, the flat interface is unstable and forms cell or dendrites, and then the tip is continuously split to form seaweed structure morphology. The adaptive finite element method is one order of magnitude lower in computing time and storage space comparing to the finite difference method. When the system size is larger, the superiority of the adaptive finite element method can be better reflected, which facilitates the simulation of the large-scale multi-field coupled phase field model.
Phase-field Simulations of Dendrite Morphologies and Selected Evolution of Primary Α-Mg Phases During the Solidification of Mg-rich Mg–Al-based Alloys

Mingyue Wang,Tao Jing,Baicheng Liu

DOI: https://doi.org/10.1016/j.scriptamat.2009.06.028

IF: 6.302

2009-01-01

Scripta Materialia

Abstract:A formulation of solid-liquid interfacial thermodynamic and kinetic anisotropic characteristics for hexagonal close-packed metals is proposed. The two- and three-dimensional dendritic growth of primary Mg in undercooled Mg-Al alloy melts is modeled using the phase-field method, based on a combination of crystallographic lattice symmetry and experimental observations. The morphologies of three-dimensional dendrites are obtained and the calculated results show intricately hierarchical branched structures. The excess free energy of the solution system is based on the Redlich-Kister model. (C) 2009 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved.
Phase-Field Modeling of Solute Trapping in Single-Phase Alloys During Directional Solidification

Rongzhen Xiao,Zhiping Wang,Changsheng Zhu,Wensheng Li,Li Feng

DOI: https://doi.org/10.4028/www.scientific.net/amr.154-155.401

2010-01-01

Advanced Materials Research

Abstract:The evolution of interface morphology for a single-phase Nickel-Copper binary alloy in directional solidification is studied by using a phase-field model cooperated solute concentration gradient corrections. The effect of pulling velocity V and strength of the crystalline anisotropy γ on interface morphology and the solute segregation is formulated. The results indicate that, the transition from plane to cells/fine cellular structures, then to planar structures(plane-cell-plane) will happen with the increment of V, and the level of solute trapping becomes stronger. When the crystal grows with cellular structures, γ crucially influences the interface pattern formation at the lower growth velocity, but the solute partition ratio is not significantly affected by the anisotropy strength. Then, the operating behavior for planar growth is hardly any affected by the crystalline anisotropy.
Study Progress in Phase-field Simulation of Directional Solidification Microstructure

ZHU Chang-sheng,XIAO Rong-zhen,WANG Zhi-ping,XU Jian-lin,WANG Yan-lu

DOI: https://doi.org/10.3321/j.issn:1001-4977.2006.01.014

2006-01-01

Abstract:The interface morphology plays an important role in microstructure during directional solidification, we can display the variety of the interface morphology using phase-field method. This paper discussed the principle of phase-field simulation in directional solidification of binary alloy and reviewed the present development situation in this area at home and abroad. The evolution of the interface morphology is simulated in Ni-Cu binary alloy during directional solidification, pointed out the existing problems and the development directions in the future.
Phase-field simulation of binary alloy during directional solidification

Zhiping Wang,RongZhen Xiao,Changsheng Zhu,JianLin Xu,Yanlu Wang

DOI: https://doi.org/10.3321/j.issn:1002-185X.2006.z1.090

2006-01-01

Abstract:A phase-field method for two-dimensional numerical simulation of binary alloy during directional solidification is studied, the evolution of the interface morphology is showed and the effects of phase-field parameters on interface morphology are formulated for Ni-Cu binary alloy. The results indicate that, with the decrement of interface width, the transition of cells to dendrites occur, the tip velocity was increasing and the stability of the tip was descending. The smaller the anisotropy is, the smaller the tip velocity is, and the easier the side-branches grow and form cellular dendrites. The amplitude of fluctuation a has an important effect on the interface morphology. When an appropriate value is assigned to a, the noise can enhance the emergence of side-branches, and form cellular dendrites, and influence the tip velocity at the same time.
Phase-Field Model of Isothermal Solidification with Multiple Grain Growth

Li Feng,Zhi-Ping Wang,Chang-Sheng Zhu,Yang Lu

DOI: https://doi.org/10.1088/1674-1056/18/5/042

2009-01-01

Chinese Physics B

Abstract:This paper develops a new phase-field model for equiaxed dendrite growth of multiple grains in multicomponent alloys based on the Ginzberg-Landau theory and phase-field model of a single grain. Taking Al-Cu and Al-Cu-Mg alloys for example, it couples the concentration field and simulates the dendrite growth process of multiple grains during isothermal solidification. the result of the simulation shows dendrite competitive growth of multiple grains, and is reapplied to the process of dendrite growth in practical solidification.
Phase-Field Model of Isothermal Solidification of Binary Alloy with Multiple Grains

Lu Yang

DOI: https://doi.org/10.7498/aps.57.1084

IF: 0.906

2008-01-01

Acta Physica Sinica

Abstract:A new phase-field model for dendrite growth of multiple grains is developed based on the Ginzberg-Landau theory and phase-field model of single grains. Taking Al-2mole-Cu alloy for example, in connection with the concentration field, we simulated the dendritic growth process of multiple grains during isothermal solidification. The simulation showed dendritic competitive growth of multiple grains, and reproduced the process of dendrite growth in practical solidification.
Phase-field model of isothermal solidification in multicomponent alloys for multiple grains

Li Feng,Changsheng Zhu,Zhiping Wang,Yang Lu

2008-01-01

Abstract:With the ability to model the pattern formation for solidification, a phase field model has been studied by many scientists. The phase field method has successfully been applied to predict microstructure evolution in metallic alloys such as dendritic solidification. Currently available models, however, are restricted to single grain. A new phase-field model for dendrite growth of multiple grains in multicomponent alloys is developed based on the Ginzberg-Landau theory and phase-field model of single grain. Taking Al-Cu-Mg alloys for example, coupled the concentration field, simulated the dendritic growth process of multiple grains during isothermal solidification. The result of simulation showed dendritic competitive growth of multiple grains; the regions between the secondary arms and grains have the highest concentration and reappeared the process of dendrite growth in practical solidification.
Three-Dimensional Phase-Field Simulation and Experimental Validation of β-Mg17Al12 Phase Precipitation in Mg-Al-Based Alloys

Guomin Han,Zhiqiang Han,Alan A. Luo,Baicheng Liu

DOI: https://doi.org/10.1007/s11661-014-2674-6

2014-12-04

Metallurgical and Materials Transactions A

Abstract:A three-dimensional (3D) phase-field model has been developed to simulate the formation of lath-shaped β-Mg17Al12 phase during hcp→bcc transformation in Mg-Al-based alloys. The model considers the synergistic effects of the elastic strain energy associated with the lattice rearrangements that accompany the phase transformation, and the interface anisotropy (both in interfacial energy and interface mobility coefficient). By using the proposed model, the essential features of 3D morphology of the β phase precipitate have been successfully predicted and experimentally validated using high-resolution transmission electron microscopy and atomic force microscopy. Furthermore, the spatial distribution of anisotropic elastic interaction field around a pre-existing β precipitate has been quantitatively determined using 3D phase-field simulation, and the effects of the anisotropic elastic interaction energy on subsequent nucleation of β phase near a pre-existing precipitate have been revealed. The results suggest that the anisotropic elastic interaction energy can promote the formation of new nucleus near the lozenge ends of the pre-existing precipitate, as explicitly substantiated by the experimental observations. The influence of different combinations of interface anisotropy and elastic strain energy on the thickness of β phase precipitate has been elucidated. The correlation between microstructural design during precipitation and the alloy-strengthening mechanisms has also been discussed in terms of dislocation motion. Based on these results, possible strategies for strengthening Mg-Al-based alloys are proposed for magnesium alloy development and microstructural design.

materials science, multidisciplinary,metallurgy & metallurgical engineering
Phase field simulation of precipitation in a Mg-Al alloy using two techniques of approximation

Guomin Han,Zhiqiang Han,Alan Luo,Anil K. Sachdev,Baicheng Liu

DOI: https://doi.org/10.1088/1757-899X/33/1/012110

2012-01-01

Abstract:In this paper, the precipitation of beta-Mg17Al12 in aging process of Mg-9% Al (mass fraction) alloy was studied using a diffuse-interface phase field model. In the model, the precipitate phase and the matrix are distinguished by a structural order parameter, and the interface region is assumed to be a mixture of the precipitate phase and the matrix. The mixture composition was calculated using a weighted average method. Two techniques of approximation for the chemical free energy of precipitate phase and matrix were employed, where the variation characteristics of the free energy with the mole fraction of solute were included. In the simulation, the temperature and diffusion mobility coefficient were assumed to be constant. The effects of the solution approximations on the morphology evolution and growth kinetics of the precipitate were discussed. The effects of the interface mobility coefficient on the interface growth kinetics were examined, and the effects of the interface anisotropy between the precipitate phase and the matrix on the morphology of the precipitate were also discussed. It is demonstrated that the solution approximation taking into account the interaction between atoms for a binary system provides a good description for the chemical free energy. The simulation results showed that the precipitate phase growing from a supersaturated solid solution has a plate-like shape, which is in agreement with experimental observations. The growth kinetics of the precipitate phase is significantly influenced by the interface mobility coefficient.
An elastoplastic phase-field study of the precipitation behaviors of Mg 17 Al 12 phase in Mg-Al-based alloys: Part II. Precipitation under various loadings

Fanglei Hu,Guomin Han,Baoqin Fu,Tang Shi,Xuefei Huang

DOI: https://doi.org/10.1016/j.jallcom.2023.171178

IF: 6.2

2023-07-03

Journal of Alloys and Compounds

Abstract:An elastoplastic phase-field model, developed in Part I, was employed to study stress-assisted diffusional phase transformation, taking plastic deformation into consideration. Different loading conditions were applied to a single crystal of Mg-Al-based alloys during precipitation, aiming at investigating the effects of elastoplastic deformation associated with both phase transformation and external loadings. The simulation results show that even when external loadings are below the materials' yield limits, plastic deformation may occur due to stress accumulation triggered by the volume expansion of β -Mg 17 Al 12 precipitates and the lattice mismatch between the precipitate and the matrix. Under both axial and shear loading conditions, plasticity plays a significant role in the morphological evolution of β -Mg 17 Al 12 precipitate with Burgers orientation. In contrast to the lath morphology observed in the absence of external loadings, a rhombic-like precipitate is formed when applying an external tensile loading of 30 MPa along [112̅0]α direction, while a mirror-symmetrical-parallelogram-like morphology emerges under a shear loading of + 30 MPa. Additionally, plasticity plays a similar dual role during precipitation under different loading conditions, which would promote the growth of the precipitate at the initial stage but tend to retard it afterward. These findings illustrate that the plastic strain generated under external loadings has a great impact on the precipitate microstructure, which provides guidelines for designing the precipitate microstructure to obtain better mechanical properties.

materials science, multidisciplinary,chemistry, physical,metallurgy & metallurgical engineering
Three-Dimensional Phase-Field Simulation and Experimental Validation of β -Mg 17 Al 12 Phase Precipitation in Mg-Al-Based Alloys

Guomin Han,Zhiqiang Han,Alan A. Luo,Baicheng Liu

DOI: https://doi.org/10.1007/s11661-014-2674-6

2014-01-01

Abstract:A three-dimensional (3D) phase-field model has been developed to simulate the formation of lath-shaped β -Mg 17 Al 12 phase during hcp→bcc transformation in Mg-Al-based alloys. The model considers the synergistic effects of the elastic strain energy associated with the lattice rearrangements that accompany the phase transformation, and the interface anisotropy (both in interfacial energy and interface mobility coefficient). By using the proposed model, the essential features of 3D morphology of the β phase precipitate have been successfully predicted and experimentally validated using high-resolution transmission electron microscopy and atomic force microscopy. Furthermore, the spatial distribution of anisotropic elastic interaction field around a pre-existing β precipitate has been quantitatively determined using 3D phase-field simulation, and the effects of the anisotropic elastic interaction energy on subsequent nucleation of β phase near a pre-existing precipitate have been revealed. The results suggest that the anisotropic elastic interaction energy can promote the formation of new nucleus near the lozenge ends of the pre-existing precipitate, as explicitly substantiated by the experimental observations. The influence of different combinations of interface anisotropy and elastic strain energy on the thickness of β phase precipitate has been elucidated. The correlation between microstructural design during precipitation and the alloy-strengthening mechanisms has also been discussed in terms of dislocation motion. Based on these results, possible strategies for strengthening Mg-Al-based alloys are proposed for magnesium alloy development and microstructural design.
Phase Field Crystal Study of Grain Boundary Structure and Annihilation Mechanism in Low-Angle Grain Boundary

Huijun Guo,Yuhong Zhao,Yuanyang Sun,Jinzhong Tian,Hua Hou,Kewu Qi,Xiaolin Tian

DOI: https://doi.org/10.1016/j.spmi.2019.03.020

IF: 3.22

2019-01-01

Superlattices and Microstructures

Abstract:Using the advantage of phase field crystal model in microstructure evolution, we simulated the details of two-dimensional triangular phase on atomic scale and diffusion time scale. The results show that the annihilation process of grain boundaries can be divided into three stages. The energy changes of the system at different stages are accurately calculated and the process is quantitatively analyzed. By comparing the atomic density distributions at different temperatures and orientation angles, it is shown that the grain boundary is sensitive to temperature. Within the range of low-angle, the increase of orientation angle inhibits the occurrence of annihilation and decreases the grain boundary migration rate. Under the applied stress, the orientation angle has a certain response relationship with the yield strength of the material. This work has some practical significance in the influence of microstructure on the mechanical properties of materials.
Phase-Field Modelling of Evolution of Compact Ordered Precipitates in Ternary Alloy Systems

Sandeep Sugathan,Saswata Bhattacharya

DOI: https://doi.org/10.1557/adv.2019.104

2019-02-11

MRS Advances

Abstract:Several technologically important alloys like Al-Li-Zr, Al-Li-Sc, Al-Sc-Zr, Al-Li-Sc-Zr, modified Inconel etc., exhibit compact precipitates in their microstructure. We present a phase-field model in two dimensions to study the morphological evolution of composite precipitates in ternary alloys. The model employs a modified regular solution description of the bulk free energy of the disordered matrix phase and ordered precipitates. Elastic strain energy of the three-phase system is described using Khachaturyan’s microelasticity theory. The temporal evolution of the spatially dependent field variables is determined by numerically solving coupled Cahn-Hilliard and Allen-Cahn equations for composition and order parameter fields, respectively. We systematically vary the misfit strains, alloy chemistry and mobilities of the diffusing species to study their effect on the development of compact precipitates. Compact core-shell morphology destabilizes when the precipitate phases have misfit strains of opposite signs with the matrix phase although the relative interfacial energies between the phases satisfy Cahn’s spontaneous wetting condition. Thus, the stability of “monodisperse” core-shell microstructures is determined by the interplay between the relative interfacial energies and elastic interactions between the phases. Further, our simulations show that low solute mobility within the core leads to sluggish coarsening of the compact particles.

English Else
Morphological evolution of particles in alloy melts during initial crystal growth: Insights from phase field simulations

Nan Liu,Ming-Wen Chen,Mingli Zhang,Zidong Wang

DOI: https://doi.org/10.1016/j.physb.2024.416133

IF: 2.988

2024-05-25

Physica B Condensed Matter

Abstract:In this study, the morphological pattern of the particle in the alloy melt in the initial stage of crystal growth is studied by phase field simulation. The numerical simulations reveal the evolution process of the particle in the initial stage of crystal growth. Specifically, certain parts of the particle interface grow outward in the initial stage of crystal growth, while other parts grow inward. Once the inward growth reaches a particular distance, these parts grow outward alongside the parts of outward growth. In the process, the particle interface takes on a petal-like structure. The relationships between the model parameters and morphological patterns of the particle are examined through a series of results. Concentration evolution along the particle interface in various crystallographic directions at various times is investigated. This study enriches our understanding of the particle's growth dynamics during crystal growth.

physics, condensed matter
Kinetics of strain-induced morphological transformation in cubic alloys with a miscibility gap

Y. Wang,L.-Q. Chen,A.G. Khachaturyan

DOI: https://doi.org/10.1016/0956-7151(93)90359-z

1993-01-01

Acta Metallurgica et Materialia

Abstract:Morphological evolutions controlled by a transformation-induced elastic strain during a solid state precipitation are systematically investigated using a prototype binary alloy as a model system. A computer simulation technique based on a microscopic kinetic model including the elastic strain effect is developed. Without any a priori assumptions concerning shapes, concentration profiles and mutual positions of new phase particles, various types of coherent two-phase morphologies such as basket-weave structures, sandwich-like multi-domain structures, precipitate macrolattices and GP zones are predicted. A wide variety of interesting strain-induced kinetic phenomena are observed during development of the above microstructures, including selective and anisotropic growth, reverse coarsening, particle translational motion, particle shape transition and splitting. In spite of all simplifications of the model, most of the simulation results are confirmed by experimental observations in various alloy systems, indicating that this kinetic model can be efficiently used for understanding, interpreting and predicting structural evolutions in real alloys.

English Else
A combined simulation and experimental study of the equilibrium shapes of η' and α precipitates in Mn-containing 7xxx Al-alloys

Yuchi Wang,Daniel Freiberg,Yang Huo,Wenhui Zhu,Mei Li,Robert E.A. Williams,Yunzhi Wang

DOI: https://doi.org/10.1016/j.actamat.2023.119094

IF: 9.4

2023-06-17

Acta Materialia

Abstract:The addition of Mn to 7xxx series Al-alloys helps improve tensile properties owed to the presence of α precipitates (Al(Mn,Fe)Si, simple cubic, 50-200 nm, non-shearable) in addition to the η' precipitates ( Mg2Zn5−xAl2+x , hexagonal, 4-6 nm, shearable) commonly observed in the 7xxx series Al-alloys. The coexistence of multiple α and η' variants, 24 for α and 4 for η', coupled with their small size-scale, makes the experimental determination by x-ray diffraction (XRD) and scanning transmission electron microscopy (STEM) challenging. This work formulates a phase-field model to predict precipitate shapes in three-dimension (3D) using experimental characterization as inputs to create virtual precipitate cross-sections for use in morphological comparison with experimental 2D (S)TEM images. Based on the atomic structures and orientation relationships observed in the experiments, the lattice site correspondences between the matrix and the two precipitate phases are derived, which are required for the prediction of shapes of coherent precipitates. Systematic phase-field simulations are then carried out to document the 3D shapes for all possible variants, as well as the corresponding 2D cross-sectional shapes when observed parallel to low-index matrix planes. These 2D cross-sectional shapes are compared with high-angle annular dark-field STEM (HAADF-STEM) images, which demonstrates that the identification of Mn precipitate type is possible by such comparisons. This helps unravel some of the complications encountered when characterizing precipitate microstructures in Mn containing Al-alloys by STEM. Finally, the equilibrium shapes as a function of precipitate size and the effect of interfacial energy anisotropy are investigated.

materials science, multidisciplinary,metallurgy & metallurgical engineering
Simulation of Microstructure Evolution in Mg Alloys by Phase-Field Methods: A Review

Yongbiao Wang,Yang Zhang,Xintian Liu,Jiaxin Wang,Xinyuan Xie,Junjie Jiang,Jianxiu Liu,Hong Liu,Yujuan Wu,Shuai Dong,Liming Peng

DOI: https://doi.org/10.3390/cryst12091305

IF: 2.7

2022-01-01

Crystals

Abstract:Microstructure is one of the vital factors that determine the mechanical properties of magnesium (Mg) alloys. However, traditional microstructure characterization methods hardly satisfy the needs of tracking the morphological evolution of Mg alloys. With the rapid development of computer simulation, using the phase-field method to simulate the evolution of microstructures in Mg alloys has become the new norm. This article provides a review of the applications of the phase-field method in Mg alloys. First, classic phase-field models and the derived multi-phase and polycrystalline phase-field models are reviewed, then a review of the twin and solid-state phase transition phase-field models was undertaken, and the research progress of phase-field simulation in the solidification, recrystallization, and solid-state phase transformation of Mg alloys, were gradually introduced. In addition, unresolved problems of phase-field simulation were summarized, and the possible direction of future studies on phase-field simulation in Mg alloys field were discussed.
Phase field simulation on microstructure evolution in solidification and aging process of squeeze cast magnesium alloy

h w pan,g m han,z q han,b c liu

DOI: https://doi.org/10.1088/1757-899X/84/1/012065

2015-01-01

Abstract:Phase-field models have been developed to simulate the dendritic growth in pressurized solidification of Mg-Al alloy during squeeze casting and the precipitation of multivariant beta-Mg17Al12 phases during the subsequent aging process. For the pressurized solidification, the effects of pressure on the Gibbs free energy and chemical potential of solid and liquid phases, and the solute diffusion coefficient were considered. For the precipitation during aging process, the effects of elastic strain energy, anisotropy of interfacial energy, and anisotropy of interface mobility coefficient were considered. The results showed that the dendritic growth rate tends to increase and the secondary dendrite arms are more developed as the pressure is increased from 0.1 to 100MPa, which showed a good agreement with the experimental results of direct squeeze casting of Mg-Al alloy. The 2D and 3D simulated precipitates had lath shapes with lozenge ends, and the precipitate variants were parallel to the basal plane and oriented in directions with an angular interval of 60 degrees, which is in good agreement with experimental observations.

Study on Effects of Interfacial Anisotropy and Elastic Interaction on Morphology Evolution and Growth Kinetics of a Single Precipitate in Mg‐Al Alloy by Phase Field Modelling

Phase Field Simulation on Morphology of Continuous Precipitate Mg17al12 in Mg-Al Alloy

Phase-field Model Simulations of Alloy Directional Solidification and Seaweed-Like Microstructure Evolution Based on Adaptive Finite Element Method

Phase-field Simulations of Dendrite Morphologies and Selected Evolution of Primary Α-Mg Phases During the Solidification of Mg-rich Mg–Al-based Alloys

Phase-Field Modeling of Solute Trapping in Single-Phase Alloys During Directional Solidification

Study Progress in Phase-field Simulation of Directional Solidification Microstructure

Phase-field simulation of binary alloy during directional solidification

Phase-Field Model of Isothermal Solidification with Multiple Grain Growth

Phase-Field Model of Isothermal Solidification of Binary Alloy with Multiple Grains

Phase-field model of isothermal solidification in multicomponent alloys for multiple grains

Three-Dimensional Phase-Field Simulation and Experimental Validation of β-Mg17Al12 Phase Precipitation in Mg-Al-Based Alloys

Phase field simulation of precipitation in a Mg-Al alloy using two techniques of approximation

An elastoplastic phase-field study of the precipitation behaviors of Mg 17 Al 12 phase in Mg-Al-based alloys: Part II. Precipitation under various loadings

Three-Dimensional Phase-Field Simulation and Experimental Validation of β -Mg 17 Al 12 Phase Precipitation in Mg-Al-Based Alloys

Phase Field Crystal Study of Grain Boundary Structure and Annihilation Mechanism in Low-Angle Grain Boundary

Phase-Field Modelling of Evolution of Compact Ordered Precipitates in Ternary Alloy Systems

Morphological evolution of particles in alloy melts during initial crystal growth: Insights from phase field simulations

Kinetics of strain-induced morphological transformation in cubic alloys with a miscibility gap

A combined simulation and experimental study of the equilibrium shapes of η' and α precipitates in Mn-containing 7xxx Al-alloys

Simulation of Microstructure Evolution in Mg Alloys by Phase-Field Methods: A Review

Phase field simulation on microstructure evolution in solidification and aging process of squeeze cast magnesium alloy