Abstract:The interfacial bonding between carbon fibers and the resin matrix affects the mechanical properties of carbon fibers, and the increase of modulus brings a challenge to the interfacial properties of carbon fibers. The traditional anodic oxidation with ammonium bicarbonate as an electrolyte has a limited effect on the surface treatment for high-modulus carbon fibers. In this paper, anodic oxidation with an acidic electrolyte is used to treat high-modulus carbon fibers. The influence mechanism of a graphitized structure on the anodizing reaction of the carbon fiber surface was studied. Raman spectroscopy, XPS, scanning electron microscopy, dynamic contact angle, and micro-debonding were used to characterize the effect of surface treatment and its influence on interfacial properties. The results show that with a certain concentration of sulfuric acid as an electrolyte, the oxidation of the carbon fiber surface with high modulus occurs more on the graphite boundary defects. Carbonylation occurs mainly in carbon fibers with high modulus. The surface of the carbon fiber with a relatively low modulus is mainly hydroxylated and carboxylated. The surface energy and interfacial properties of high-modulus carbon fibers were improved effectively by anodic oxidation with sulfuric acid as an electrolyte. Under the condition that the mechanical properties of carbon fibers are not decreased, the surface energy of high-modulus carbon fibers with 352 GPa increases from 36.17 to 45.41 mN/m, and the interfacial shear strength (IFSS) with the epoxy resin increases by 80.8% from 34.9 to 63.1 MPa. When the fiber modulus is 455 GPa, the surface energy of the carbon fiber increases from 32.32 to 43.73 mN/m, and IFSS increases by 253.4% from 11.8 to 41.7 MPa.

The Effect of Oxidation Treatment by KClO3/H2SO4 System on Intersurface Performance of Carbon Fibers

Study on modification of carbon fiber and performance of carbon paper as gas diffusion layer

Research on Surface Treatment of Carbon Fiber and the Conductive Properties of Paper

Chemical Treatment of Carbon Fibers and the Development of Functional Paper

The Effect of Oxidation Treatment with Supercritical Water/Hydrogen Peroxide System on Intersurface Performance for Polyacrylonitrile-Based Carbon Fibers

Effects of Oxidation Treatment by KClO3/H2SO4 Systems on the Chemical, Crystal and Microscopic Structures of Polyacrylonitrile Fibers

Effects of carbon fibers modification on the properties of unsaturated polyester self-healing composites

DMTA STUDY ON ELECTROCHEMICAL OXIDATION EFFECT OF CARBON FIBERS SURFACE

Study on Carbon Fiber Surface Treatment Based on Surface Oxidation Method

Surface modification of carbon fibers by anodic oxidation

Influences of Liquid Oxidation Treatment on Surface Structure of Carbon Fiber

Effect of HNO3 oxidation treatment on surface components and structure of domestic PAN-based carbon fibers

Effects of Surface Treatment of Carbon Fiber: Tensile Property, Surface Characteristics, and Bonding to Epoxy

The oxidation of carbon fibers through K2S2O 8/AgNO3 system that preserves fiber tensile strength

The Effect of Anodic Oxidation Treatment on Interfacial Properties of Composites

Influence of Surface Properties of Graphene Oxide/Carbon Fiber Hybrid Fiber by Oxidative Treatments Combined with Electrophoretic Deposition

Effect of Electrochemical Oxidation on the Surface Structure and Mechanical Performance of High Strength and High Modulus Carbon Fibers

Effect of Electrochemistry Oxidation on Surface Characteristics of Carbon Fibers

The Etching Treatment of Carbon Fiber Surface by Supercritical CO_2

Effect of Electrochemical Oxidation Degree of Carbon Fiber on the Interfacial Properties of Carbon Fiber–reinforced Polyaryletherketone Composites

Construction of Polar Functional Groups on the Surface of a High-Modulus Carbon Fiber and Its Effect on the Interfacial Properties of Composites