Abstract:： In order to investigate the effects of stress triaxiality, Lode angle, temperature and strain rate on the fracture characteristics of 6061-T651 aluminum alloy materials, the mechanical property tests of materials are carried under different stress states, temperature and strain rate using universal material testing machine. Firstly, the mechanical property test results show that the fracture strain of 6061-T651 aluminum alloy material decreases with the increase of stress triaxiality. And also, the fracture strain of material related to the Lode angle parameter, especially the effect of the Lode angle more significantly at the range of lower stress triaxiality. When the temperature less than 250 ℃ , the temperature of material has significant influence on its flow stress, while the influence of temperature on its fracture strain can be ignored. While the temperature more than 250 ℃ , the temperature of material has greatly influence on its flow stress and fracture strain. Moreover, the strain rate has no significant effect on the fracture strain of 6061-T651 aluminum alloy. Subsequently, basing on the test results of mechanical properties, the Modified Johnson-Cook(MJC) criterion is obtained by modifying Johnson-Cook(J-C) fracture criterion, and the parameters of MJC and Modified Mohr-Coulomb(MMC) fracture criterion are calibrated. Finally, the impact test of sphere projectile penetrating the 6061-T651 aluminum alloy target plate is conducted on a one-stage gas gun, and also the ballistic limit velocity and failure mode of target are obtained. In order to verify the validity of the model and parameters, and the corresponding 3D model of projectile impact target is established by using ABAQUS/Explicit finite element software. The results showed that the prediction results of Lode angle dependent MMC fracture criterion is closer to the test compared with the Lode angle independent MJC fracture criterion.

Comparison Investigation of Tensile Fracture Properties of Al Alloy at Different Dynamic Loadings

Dynamic Mechanical Properties and Modification of Fracture Criteria of 6061-T651 Aluminum Alloy

Flow and Fracture Behavior of Aluminum Alloy 6082-T6 at Different Tensile Strain Rates and Triaxialities

Experimental study on spallation in differently heat-treated 6061Al

Experimental Investigation on Spall Fracture of 30crmns1ni2a Steel

Experimental Studies on Mixed-Mode Dynamic Fracture Behaviour of Aluminium Alloy Plates with Narrow U-Notch

Characterization of the Fracture of an Aluminum Alloy Anticollision-Beam to Impact Loading

Strain Rate-Dependent Constitutive and Low Stress Triaxiality Fracture Behavior Investigation of 6005 Al Alloy

A Ductile Fracture Model Incorporating Stress State Effect

Investigation of Dynamic Fracture Behavior of Additively Manufactured Al-10Si-Mg Using High-Speed Synchrotron X-ray Imaging

Dependence of Spallstrength on Temperature, Grain Size and Strain Rate in Pure Ductile Metals

Fracture Behavior of Aircraft Fuselage Materials under Thermal / Mechanical Loadings for Mode I Crack

Research on dynamic constitutive model and fracture criterion of 6082-T6 aluminium alloy

Mechanical Behavior and Fracture Mechanism of 2219 Aluminum Alloy with Different Heat Treatment Conditions Under Dynamic Loading

Study on Fracture Toughness Measurement by Compact Tension Method of Ultra-high Strength Aluminium Alloy

Fractal of tensile fracture morphology of 5083 aluminum alloy sheet and its relationship with tensile properties

The Effect of Tungsten Heavy Alloy Properties on Fracture Mode Under Explosive Loading

Research on Fracture Mode under Dynamic Tension of W Fiber/Zr-based Amorphous Alloy Matrix Composites

Experimental and Theoretical Research on Ductile Fracture Criterion

An Atomic View on the Evolution of Spall Damage in Solid–liquid Mixed Aluminum at High Strain Rates Through Stretching Simulations

The Relationship Between Fracture Toughness and Microstructure of Fully Lamellar TiAl Alloy