Abstract:A new dual-bandpass 180° hybrid coupler, based on four properly designed shorted-stub loaded stepped-impedance resonators, is proposed in this paper. In order to construct the collaboratively designed coupler/filter, the resonators are coupled magnetically and electrically with each other through three shorted stubs and an open coupled line, respectively. According to the approach of filter synthesis and the derived design equations, the characteristic admittances and electrical lengths of the resonators and coupling sections are determined to achieve the desired resonant frequencies, external Q factors, and internal coupling coefficients for dual passbands. A design procedure is provided. The design flexibilities for ratios of central frequencies and achievable bandwidths are explored. The component shows both filtering and power dividing functions within two specific passbands, whose good performances are demonstrated by the simulated and measured results. The two second-order passbands of a fabricated prototype are located at 2.42 and 5.84 GHz, with 4.6% and 5.2% bandwidths, respectively. The insertion losses are 1.0 and 1.4 dB over 3-dB power division. The isolations are better than 23.5 and 32.8 dB. In both the in-phase and out-of-phase responses, the in-band amplitude and phase imbalances are always within -1.6-0.6 dB and -6.5°-9.5°, respectively.

NOVEL COMPACT MULTILAYER CROSS-COUPLED FILTER WITH ENHANCED INNER COUPLING SCHEME

Compact cross-coupled circular cavity filters using multilayer substrate integrated waveguide

Compact Cross-Coupled Filter With Multilayer Configuration For Suppression Of Spurious Responses

A Multilayer Dual-Band Coupler Based on Composite Right/left-Handed Folded Substrate Integrated Waveguide

Novel Substrate Integrated Waveguide Filters with Mixed Cross Coupling (MCC)

Design of multilayer triangular substrate integrated waveguide filter in LTCC

A Novel 76 and 94ghz Dual Band Bandpass Filter Using Multilayer Step Impedance Resonators (Sirs)

Compact quasi-elliptic bandpass filter based on folded ridge substrate integrated waveguide (FRSIW)

Collaborative Design of a New Dual-Bandpass 180 Hybrid Coupler

Substrate Integrated Waveguide Filter with Flat Passband Based on Complex Couplings

A Substrate-Integrated Evanescent-Mode Waveguide Filter with Nonresonating Node in Low-Temperature Co-Fired Ceramic

A Novel Ltcc Multilayer Siw Linear Phase Filter

Design of compact dual-band quasi-elliptic filter with high selectivity and wide stopband rejection

Novel microstrip bandpass filter with multiple transmission zeros and wide stopband

A Compact Dual-Mode Microstrip Filter Using Hexagonal Resonator and Capacitive Loading Technique

Dual-band bandpass filter using centrally coupled resonators (CCRs)

Analysis of Cross-coupled Filter Technology and Design of LC Filter

Novel Cross-Coupled Filter Design Using Improved Split-Ring Resonators Based On Stepped Impedance Resonator

Compact Single- and Dual-Band Filtering 180° Hybrid Couplers on Circular Patch Resonator

Design of a compact bandpass filter with multi-coupled stepped impedance resonators using LTCC technology