Interfacial Microstructure and Strengthening Mechanism of BN-doped Metal Brazed Ti/SiO2-BN Joints

Z. W. Yang,L. X. Zhang,W. Ren,M. Lei,J. C. Feng

DOI: https://doi.org/10.1016/j.jeurceramsoc.2012.10.017

IF: 5.7

2013-01-01

Journal of the European Ceramic Society

Abstract:Ag–Cu–Ti+BN composite filler was developed to braze SiO2-BN ceramic and titanium. The effects of BN particles content on the microstructure and mechanical properties of the joints were investigated. The fine TiB whiskers and TiN particles were synthesized in the brazing seam by introducing BN particles. TiN–TiB2 reaction layer formed adjacent to SiO2-BN ceramic while Ti–Cu compound layer formed at Ti substrate. With the increase of BN content, more fine-grains formed in the joint and the reaction layer nearby the base materials became thinner. The hardness and modulus of the reaction phases were characterized by nanoindentations to reveal the plastic deformability of the brazing seam. The improvement of the joint strength was 340% with 3wt.% BN addition. The joint strength was determined by the thermal expansion mismatch between the joined materials, plastic deformation in the brazing seam, and interfacial structure of the joint.