Abstract:Over the past several decades, trace heavy metal ion pollution, such as Cd(II), Cu(II), Pd(IV), etc., have attracted much attention because of their virulent and hard degradation properties. Recently, great efforts have been devoted to establish new methods and technologies to removal toxic metals. Among them, activated carbon adsorption, especially the modified activated carbon technology has been extensively studied due to its feasibility, such as, the low-cost of activated carbon, the recovery of the activated carbon. In this study, Cd(II) was chosen as the target heavy metal ion to evaluate the activity of modified powdered activated carbon(PAC) and commercial available tannic acid(TA), a kind of Chinese gallotannin with molecular weight 1701, was employed in the modification of the surface properties of PAC. Optimum experimental parameters such as pH, contact time, initial concentration of TA and adsorption capacity for tannic acid immobilisation onto PAC and Cd(II) adsorption on tannic acid-powdered activated carbon combination were determined , respectively. Adsorption of Cd(II) on PAC alone was also determined to compare the experimental results. The adsorption capacity for tannic acid immobilisation onto PAC was analysed by the solution absorbance variation of maximal ultraviolet absorption peak at 276 nm, and the concentration of Cd(II) in the solution was measured through AAS and ICP-AES. Specific surface area, pHpzc and surface functional groups of PAC and TA-PAC combination were determined by BET, powder addition method and Boehm titration method, respectively, to study on the adsorption mechanism of Cd(II) on modified surface. Results showed that TA was effective to enhance the metal adsorption capacity of PAC surfaces and the modified PAC got the maximal Cd(II) adsorption capacity with 25 gram tannic acid immobilised per gram PAC at the optimum immobilization pH value 3.5, at room temperature 18°C . The polyphenol structure of TA immobilised o- - n PAC surfaces may contribute to the changes of adsorption capacity. Neither of the Langmuir isotherm equation and Freundlich isotherm equation was found to provide reasonable well fit for the TA-PAC and Cd(II)-TA-PAC combinations.

Adsorption of Tartaric Acid–cadmium Complex by Imprinted Chitosan Biopolymer

Biosorption of Citric Acid–cadmium Complex by Imprinted Chitosan Polymer

Cd(II) adsorption on various adsorbents obtained from charred biomaterials.

Study on the Adsorption Efficiency of CHCl3 ＆ CHBrCl2 on Chitosan-activated Carbon Sorbent

Effective Adsorption Ag(I) Onto Triethylenetetramine-Modified Chitosan Beads: Adsorption Equilibrium, Kinetic, and Thermodynamic Studies

Synthesis, characterization, and performance evaluation of ion-imprinted crosslinked chitosan (with sodium tripolyphosphate) for cadmium biosorption

Adsorption of platinum(IV) and palladium(II) from aqueous solution by thiourea-modified chitosan microspheres.

Preparation, Characterization and Properties of Crosslinked Chitosan/Palygorskite Resin with Tannic Acid As Template Molecules

Fast and Effective Removal of Cadmium Ion from Water Using Chitosan Encapsulated Magnetic Fe 3 O 4 Nanoparticles

ADSORPTION PROPERTIES OF CHITOSAN-BASED MAGNETIC RESINS TOWARD Au~(3+)AND Ag~+ I.STUDY ON ADSORPTION EQUILIBRIUM AND KINETIC

Adsorption of Pb(II) in water by modified chitosan-based microspheres and the study of mechanism

Adsorption performance of thiourea-modified chitosan microspheres to Pt4+ and Pd4+ I. adsorption equilibrium and kinetics

Equilibrium and Kinetic Study of Lead and Copper Ion Adsorption on Chitosan-Grafted-Polyacrylic Acid Synthesized by Surface Initiated Atomic Transfer Polymerization

Chitosan cross-linked and grafted with epichlorohydrin and 2,4-dichlorobenzaldehyde as an efficient adsorbent for removal of Pb(II) ions from aqueous solution

The Enhancement of Cd(II) Adsorption by Immobilsation of Tannic Acid onto Powdered Activated Carbon

Adsorption of Acid Red R Onto Chitosan Grafted with Β-Cyclodextrin

Preparation, Characterization, Adsorption Kinetics and Thermodynamics of Chitosan Adsorbent Grafted with a Hyperbranched Polymer Designed for Cr(VI) Removal

Comparative study on the adsorption of lead ions by kaolin loaded chitosan by different modification methods

Highly efficient removal of tannic acid from aqueous solution by chitosan-coated attapulgite

Ion-imprinted chitosan without cross-linking agent for efficient selective adsorption of Al(III) from rare earth solution

Optimization of preparation parameters for environmentally friendly attapulgite functionalized by chitosan and its adsorption properties for Cd2+