Abstract:The surfaces of nanoscale zerovalent iron (NZVI) used for groundwater remediation must be modified to be mobile in the subsurface for emplacement. Adsorbed polymers and surfactants can electrostatically, sterically, or electrosterically stabilize nanoparticle suspensions in water, but their efficacy will depend on groundwater ionic strength and cation type as well as physical and chemical heterogeneities of the aquifer material. Here, the effect of ionic strength and cation type on the mobility of bare, polymer-, and surfactant-modified NZVI is evaluated in water-saturated sand columns at low particle concentrations where filtration theory is applicable. NZVI surface modifiers include a high molecular weight (MW) (125 kg/mol) poly(methacrylic acid)-b-(methyl methacrylate)-b-(styrene sulfonate) triblock copolymer (PMAA-PMMA-PSS), polyaspartate which is a low MW (2-3 kg/mol) biopolymer, and the surfactant sodium dodecyl benzene sulfonate (SDBS, MW = 348.5 g/mol). Bare NZVI with an apparent zeta-potential of -30 +/- 3 mV was immobile. Polyaspartate-modified nanoiron (MRNIP) with an apparent zeta-potential of -39 +/- 1 mV was mobile at low ionic strengths (< 40 mM for Na+ and < 0.5 mM for Ca2+), and had a critical deposition concentration (CDC) of approximately 770 mM Na+ and approximately 4 mM for Ca2+. SDBS-modified NZVI with a similar apparent zeta-potential (-38.3 +/- 0.9 mV) showed similar behavior (CDC approximately 350 mM for Na+ and approximately 3.5 mM for Ca2+). Triblock copolymer-modified NZVI had the highest apparent zeta-potential (-50 +/- 1.2 mV), the greatest mobility in porous media, and a CDC of approximately 4 M for Na+ and approximately 100s of mM for Ca2+. The high mobility and CDC is attributed to the electrosteric stabilization afforded by the triblock copolymer but not the other modifiers which provide primarily electrostatic stabilization. Thus, electrosteric stabilization provides the best resistance to changing electrolyte conditions likely to be encountered in real groundwater aquifers, and may provide transport distances of 10s to 100s of meters in unconsolidated sandy aquifers at injection velocities used for emplacement.

Influence of Calcium Ions on the Colloidal Stability of Surface-Modified Nano Zero-Valent Iron in the Absence or Presence of Humic Acid

Influence of Humic Acid and Its Different Molecular Weight Fractions on Sedimentation of Nanoscale Zero-Valent Iron

Transport of Surface-Modified Nano Zero-Valent Iron (SM-NZVI) in Saturated Porous Media: Effects of Surface Stabilizer Type, Subsurface Geochemistry, and Contaminant Loading

Interaction Between Cu2+ and Different Types of Surface-Modified Nanoscale Zero-Valent Iron During Their Transport in Porous Media.

Effects of Humic Acid and Surfactants on the Aggregation Kinetics of Manganese Dioxide Colloids

Chromate Removal by Surface-Modified Nanoscale Zero-Valent Iron: Effect of Different Surface Coatings and Water Chemistry

Influence of aggregation and sedimentation behavior of bare and modified zero-valent-iron nanoparticles on the Cr(VI) removal under various groundwater chemistry conditions

Aqueous Aggregation Behavior of Citric Acid Coated Magnetite Nanoparticles: Effects of Ph, Cations, Anions, and Humic Acid

Effects of Cr(VI) Oxyanion, Humic Acid and Solution Chemistry on the Aggregation and Colloidal Stability of Green Synthesized Chlorapatite Nanoparticles.

Colloidal Chemistry in Water Treatment: The Effect of Ca 2+ on the Interaction between Humic Acid and Poly(diallyldimethylammonium chloride) (PDADMAC)

Overlooked encounter process that affects physical behaviors of stabilized nanoscale zero-valent iron during in situ groundwater remediation

Transport Behavior of Humic Acid-Modified Nano-Hydroxyapatite in Saturated Packed Column: Effects of Cu, Ionic Strength, and Ionic Composition

Influence of Humic Acid on the Transport and Deposition of Colloidal Silica under Different Hydrogeochemical Conditions

Effect of Dissolved Organic Matter on the Stability of Magnetite Nanoparticles under Different Ph and Ionic Strength Conditions

Influence of Fulvic Acid on the Colloidal Stability and Reactivity of Nanoscale Zero-Valent Iron.

Colloidal properties and stability of colloidal activated carbon: Effects of aqueous chemistry on sedimentation kinetics

Study of Stability and Aggregation Kinetics of Coated Zero-Valent Iron Nanoparticles

Effects and Mechanism of Humic Acid on Chromium(Vi) Removal by Zero-Valent Iron (Fe-0) Nanoparticles

The effect of humic acid on the aggregation of titanium dioxide nanoparticles under different pH and ionic strengths.

Ionic strength and composition affect the mobility of surface-modified Fe0 nanoparticles in water-saturated sand columns

Removal of Trichloroethylene by Sulfide-Modified Nanoscale Zerovalent Iron Coated with Different Stabilizers in Aqueous Solution