Abstract:In this study, three different hybrid numerical frameworks of potential and viscous flows are developed for ship maneuvering in waves, including a direct CFD simulation method based on URANS (hybrid framework 1), an efficient mean wave force method combining a frequency domain boundary element method (FDBEM) and viscous CFD (hybrid framework 2), and a novel hybrid numerical framework based on the functional decomposition model (hybrid framework 3), in which the propeller model is modelled using the iterative body-force model MOUM. The KCS container ship model, which has abundant available experimental data (including seakeeping tests in head and oblique waves, turning and zigzag maneuvering tests in calm water, and turning maneuvering tests in waves), is selected as the research subject. Firstly, these methodologies including a boundary wave-generation method, a FDBEM, and a SWENSE-based (Spectral Wave Explicit Navier-Stokes Equations) hybrid solver HUST-SWENSE are developed to address the issue of wave-induced motions and forces of ships in waves. HUST-SWENSE decomposes the total physical field into the incident field, obtained by potential flow theory, and the complementary field, solved by functional-decomposition single-phase level-set and RANS equations. A comprehensive convergence study of seakeeping performance using different mesh numbers of the hull and free surface for FDBEM is conducted to ensure accuracy and reliability. Additionally, a thorough numerical uncertainty analysis of ship motions in waves and turning circle in calm water for HUST-SWENSE is carried out. Then different seakeeping solvers for wave-ship interaction in head and oblique waves, as well as the body-force method MOUM in solving hull-propeller-rudder interaction, are validated. Finally, three hybrid numerical frameworks are constructed to solve the issue of ship maneuvering in waves. Results reveal that the hybrid framework 3 is an excellent alternative for predicting ship maneuvering in waves, with the same accuracy with framework 1 and the 75% improvement of computational efficiency. The hybrid framework 2 also exhibits great potential, as it improves computational efficiency by 95%.

Path Following of Marine Surface Vessels Using Bow and Aft Rudders in Wave Fields

Robust Dynamic Positioning of Autonomous Surface Vessels with Tube-Based Model Predictive Control

MPC-Based Collaborative Control of Sail and Rudder for Unmanned Sailboat

A nonlinear model predictive control method for ship path following in waves

This is the Way: Mitigating the Roll of an Autonomous Uncrewed Surface Vessel in Wavy Conditions Using Model Predictive Control

Adaptive Dynamic Model-Based Path Following Controller Design for an Unmanned Surface Vessel

Research on the maneuverability and path following control of the wave glider with a propeller-rudder system

Collision Avoidance and Path Point Tracking Control for Underactuated Unmanned Surface Vehicles with Unknown Model Nonlinearity

Nonlinear Model Predictive Control for Enhanced Navigation of Autonomous Surface Vessels

Comparison of path following in ships using modern and traditional controllers

Research on path following control system of wave gliders based on maneuverability demand estimator

Rudder/fin joint anti-rolling control system based on interference model predictive control and sliding mode observer

Soft Actor–Critic Based Active Disturbance Rejection Path Following Control for Unmanned Surface Vessel under Wind and Wave Disturbances

Time-optimal control of ship manoeuvring under wave loads

Time Domain Simulations of Ship Maneuvering and Roll Motion in Regular Waves Based on a Hybrid Method

Path Following Based on Waypoints and Real-Time Obstacle Avoidance Control of an Autonomous Underwater Vehicle

Path following controller for autonomous ships: simulation, experiment, and application in shallow water

Adaptive propeller rudder controller for the wave glider with a propeller-rudder control system

Event-triggered error-constrained switching guidance-based marine surface vessel path-following control and collision avoidance

Assessment of Different Hybrid Methods for Simulations of Free Running Surface Ship Maneuvering in Waves

Multi-Ship Control and Collision Avoidance Using MPC and RBF-Based Trajectory Predictions