Abstract:Displacement-controlled systems have high efficiency and are widely used in industry. Accurate control of the actuator motion in hydraulic systems is usually a necessity in industrial applications such as the motion of control surfaces in fixed-wing airplanes for flight control as well as the aircraft brake systems. To address this need, the current study was conducted with the goal of developing a high-fidelity model to achieve precise control. This work focused on modeling a hydrostatic transmission that is used for controlling a linear actuator velocity. The flow entering the actuator was changed using a variable displacement pump. The study included examining the stability and performance of the open-loop system. Additionally, the study involved the design of the proportional-integral-derivative PID and H∞ controllers, followed by the analysis of the stability and performance of the closed-loop system with both controllers. Furthermore, the multiplicative uncertainty is taken into account and the robustness of the system is verified using controllers PID and H∞. In the current study,Uncertain parameters such as actuator efficiency, pump speed, and viscous friction coefficient were considered and allowed for a ±5% deviation from their stated values. Taking uncertainty into account ensures that the system performs properly even in case where the design parameters vary within the specified range. The system response is compared for the cases of open-loop system, closed-loop system with PID controller, and closed-loop system with H∞ controller. The results demonstrated that the open-loop system remains stable for real-world applications but shows insufficient performance in terms of input tracking and disturbance rejection. The introduction of the PID controller significantly enhanced the system's response to a reference input; however, its disturbance rejection capabilities in terms of overshoot and settling time were still unsatisfactory. The system equipped with the PID controller failed to meet the robustness requirements. Conversely, the utilization of H∞ controllers yielded superior responses and fulfilled the robustness criteria.

Angle displacement robust controller for the port plate of the hydraulic transformer

Adaptive Robust Control Of Variable Displacement Pumps

PREDICTIVE ROBUST CONTROL BASED ON HIGHER-ORDER SLIDING MODE FOR PASSIVE HEAVE COMPENSATOR WITH HYDRAULIC TRANSFORMER

EXTENDED DISTURBANCE OBSERVER-BASED SLIDING MODE FAULT-TOLERANT CONTROL FOR THE DUAL-VALVE HYDRAULIC SERVO SYSTEM WITH REDUCED-ORDER MODEL

Prediction, Control and Energy Analyses of Hydraulic Transformer Based Heave Compensator

Disturbance observer based pressure control for electrohydraulic system

Hybrid fuzzy PID control of hydraulic robot

Nonlinear Robust Adaptive Control of Electro-hydraulic System

Rotation and Gate Movement Compound Control of Screw Conveyor Hydraulic System with Disturbance Compensation

Sliding Mode Control in Position Control for Asymmetrical Hydraulic Cylinder with Chambers Connected

Nonlinear Motion Control of a Hydraulic Press Based on an Extended Disturbance Observer

Speed Tracking Control For Hydraulic Transformer System Based On Active Regulating Common Pressure Rail

An Adaptive Robust Controller for Hydraulic Robotic Manipulators with a Flow-Mapping Compensator

Hybrid Motion/Force Control of the Hydraulic Cooperative Manipulator in Constrained Motion

Hierarchical Decoupling Controller with Cylinder Separated Model of Hydraulic Manipulators for Contact Force/Motion Control

Finite-Time Fault-Tolerant Control for Swashplate of Integrated Hydraulic Transformer with Uncertain Mismatched Interference

Design and Control of the Mechanical-Hydraulic Hybrid Transmission System in Wind Turbines

Pitch Angle Control for Wind Turbine Based on Constant Pressure Network and Hydraulic Motor with Variable Displacement

A Position Control Based on Active Disturbance Rejection Controller Considering Parameter Variations of Harmonic Drive Gear Systems

Design of uncertain displacement controlled velocity control system for hydraulic actuator

Angle tracking control of integrated hydraulic transformer inner loop servo system