Abstract:Due to the advantage of strong load capacity and large transmission ratio, planetary gearboxes are widely used in heavy-duty machinery. The complex structure and tough working environment make the gears and bearings in planetary gearbox prone to failure, especially the occurrence of multi-faults. If these faults cannot be diagnosed in time, the shutdown of the entire equipment and even major accidents may happen. The analysis of vibration signal collected from acceleration transducer is regarded as an effective method for fault diagnosis of planetary gearbox to prevent accidents and save cost. In practical application, the collected measurements are always a mixture of signals from many unknown sources, which is considered challenging as an underdetermined blind source separation (UBSS) problem for fault location and recognition. A novel method is proposed in this study to tackle this challenge by three stages: vibration signal sparsity, mixing matrix estimation and source signal recovery. In the first stage, the vibration signals are transformed into the time-frequency (TF) domain by Wigner-Ville distribution (WVD) and then the K-singular value decomposition (K-SVD) is used to further improve the sparsity of time-frequency distribution (TFD) of vibration signals. In the second stage, according to the clustering distribution characteristics of TFDs, a clustering algorithm, namely the Variational Bayesian Gaussian Mixture Model (VBGMM), is used to estimate the number of sources and the values of mixing matrix at the same time. In the last stage, the source signal can be recovered from the source TFD estimate by a TF synthesis algorithm. In order to verify the practicability and effectiveness of the proposed method, a scale-down test rig for planetary gearbox of quay crane is built to simulate the occurrence of fault under variable work conditions. And several acceleration transducers are fixed on the gearbox to collect multi-channel vibration signals. The experimental results, compared with some existing methods, show that the source signals separated by using the proposed method have a clearer frequency spectrum characterization, which remarkably reduces the difficulty of fault feature extraction and improves the accuracy of multi-fault diagnosis.

Newton iteration-based blind source separation for grinding machine fault diagnosis

Condition Monitoring And Fault Diagnosis Of Rotating Machines With Blind Source Separation

Mechanical Vibration Signal Separation Using Blind De-Convolution Technology

Rotating Machine Fault Diagnosis Based on Denoising Source Separation

On Blind Source Separation (BSS) and Its Application to Fault Diagnosis of Machinery

Blind Separation of the Mechanical Fault Sources Under the Noise Environment

An Efficient Identification Method for Underdetermined Signals Based on DSS and FSWT

Blind Source Separation Based on EMD and Correlation Measure for Rotating Machinery Fault Diagnosis

A Sparse Underdetermined Blind Source Separation Method and Its Application in Fault Diagnosis of Rotating Machinery

Study on mechanical noise separation based on technique of blind source

Diagnosis of non-linear mixed multiple faults based on underdetermined blind source separation for wind turbine gearbox: simulation, testbed and realistic scenarios

A Novel Method for Multi-Fault Diagnosis of Rotor System

Blind Vibration Component Separation and Nonlinear Feature Extraction Applied to the Nonstationary Vibration Signals for the Gearbox Multi-Fault Diagnosis

Successive variational mode decomposition and blind source separation based on salp swarm optimization for bearing fault diagnosis

Unsupervised Learning-Driven Intelligent Fault Diagnosis Algorithm for High-End Bearing

Underdetermined Blind Source Separation for Multi-fault Diagnosis of Planetary Gearbox

Blind source separation of rotating machinery fault signals based on fractional lower order statistics

Blind Source Separation for Under-Determined Mixtures Based on Time-Frequency Analysis

Blind source separation and fault diagnosis of Single-channel rotating mechanical compound fault signal

Blind Sources Separation for Convolutive Mixtures and Its Applications in Mechanical Vibration Noise Elimination

Feature Extraction of Rolling Bearing Incipient Fault Using an Improved SCA-Based UBSS Method